1-6-5.CLUSTER電軌CLUSTER BAR
1-6-5.CLUSTER電軌CLUSTER BAR
1.C&W電軌系統(SAF-T-BAR)新目錄
1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load
1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load
1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load
1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load
1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load
1-6.CLUSTER電軌CLUSTER BAR 下載down load
Conductor Bar
Continuous roll formed inverted “V” cross section encased by an insulating PVC cover. Splice kit included with the price of conductor. Operating Temperature: -10O F to 160O F. Bars are 15.0 ft (4.57 m) long
Bar Type | Current Part No. Capacity (A) (w/Bolted Splice) | Part No. (w/Crimped Splice) |
Wt lb (kg) |
Galvanized Steel | 40 28656 | 28101 | 2.0 (0.91) |
Rolled Copper | 120 28655 | 28100 | 2.0 (0.91) |
Expansion Section
Factory assembled with overlapping design to provide continuous contact with collector shoes to compensate for thermal expansion. Power feeds are flexible jumpers installed to for 40A steel conductor and 96’ for 120A copper conductor. Length: 6 ft. (1.83m)meet electrical and mechanical requirements. Spacing for expansion sections is every 141’
|
Provides the electrical connection from power source to the conductor bar. It may be located at any point along the conductor, preferably near the systems' center to reduce voltage drop.
|
Provides the electrical connection from the power source to the conductor bar. This power feed attaches to the end of the bar.
|
Two-piece polypropylene boot used to close off the open ends of the conductor bar.
Part No. Wt lb (kg)
28105 0.3 (0.14)