1-5-10.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR)
1-5-10.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR)
1.C&W電軌系統(SAF-T-BAR)新目錄
1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load
1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load
1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load
1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load
1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load
1-6.CLUSTER電軌CLUSTER BAR 下載down load
Side Contact Collectors are available in numerous configurations to match the application. Note that collectors should not be used as power switching devices. The resultant arcing may cause rapid deterioration of both contact shoes and conductor bars. Ampere capacity of conductor bars, power feeds, jumpers etc., should be greater than or equal to that off the system. Consult factory for systems using tandem mounted collectors and special requirements. For mechanically discontinuous systems, only collectors designated as "self-centering" should be used.
Contact shoe pressure: Between 4 and 6 pounds (1.81 kg to 2.72 kg) for all collector styles.
M-Head, L-Base Type, 40A
For conveyor, monorail systems, and crane bridges. Operates through curves at a minimum radii of 9.0 (228).
Standard pigtail length: 15" (381 mm)
|
For conveyor, monorail systems, and crane bridges. Operates through curves at a minimum radii of 9.0 (228). Includes an additional pigtail for extra current capacity.
Standard pigtail length: 15" (381 mm)
|
This rugged collector provides a long stroke for continuous systems where clearance is not restricted.
Standard pigtail length: 15" (381 mm)
|