All kinds of Grabs

 

A.Lifting Magnets B.Magnetic Separators C.All kinds of Grabs D.Vacuum lifter & Accessories

E.Chain sling,hook & Accessories F.Hook,Block,Shackles & Turnbuckles G.Wire rope end fitting H.Web slings 

I.Stainless steel Lifting Chain & accessories J.Clamp & C Hook,Coil Lifter K.Lifting Tong L.Container Spreader 

M.Weight measurement & Crane Scale N.Crane hook dimension 

Fa.鋼索旋轉器 Wire Rope Swivels Fb.自動釋放鉤頭 Auto-Release Hook Fc.螺栓及旋轉吊環 Eye Bolt & Hoist Ring

各種抓斗 all kinds of Grabs
                         1.抓斗各種應用GRABS APPROVED AND RELIABLE IN ACTION                                                               2-1.無線遙控控制抓斗RADIO REMOTE CONTROL GRABS 

                             1.抓斗各種應用                                                                    2-1.無線遙控控制抓斗

        GRABS APPROVED AND RELIABLE IN ACTION                    RADIO REMOTE CONTROL GRABS


                        2-2.電油壓雙瓣式抓斗ELECTRO HYDRAULIC CLAMSHELL GRABS                                                              2-3.電動油壓多爪式抓斗ELECTRIC HYDRAULIC ORANGE PEEL GRABS

                       2-2.電油壓雙瓣式抓斗                                                       2-3.電動油壓多爪式抓斗

       ELECTRO HYDRAULIC CLAMSHELL GRABS                  ELECTRIC HYDRAULIC ORANGE PEEL GRABS

                   
                        2-4.機械式單索式雙瓣式接觸開啟抓斗 MECHANICAL SINGLE WIRED TOUCH DOWN CLAMSHELL GRABS                                                              2-5.機械式接觸地面多爪式抓斗 MECHANICAL SINGLE WIRED TOUCH DOWN ORANGE PEEL GRABS

      2-4.機械式單索式雙瓣式接觸開啟抓斗                                2-5.機械式接觸地面多爪式抓斗

               MECHANICAL SINGLE WIRED                                                 MECHANICAL SINGLE WIRED

           TOUCH DOWN CLAMSHELL GRABS                                  TOUCH DOWN ORANGE PEEL GRABS

                   
                        2-6.機械式雙索雙瓣抓斗 MECHANICAL DOUBLE WIRED CLAMSHELL GRABS                                                                 2-7.機械式雙索式多爪抓斗 MECHANCE DOUBLE WIRED ORANGE PEEL GRABS

                    2-6.機械式雙索雙瓣抓斗                                                      2-7.機械式雙索式多爪抓斗

   MECHANICAL DOUBLE WIRED CLAMSHELL GRABS               MECHANCE DOUBLE WIRED ORANGE                                                                                                                                                                                PEEL GRABS

              
                        2-8.油壓式抓斗HYDRAULIC GRABS                                                           3. 電油壓雙瓣和多爪抓斗及油壓抓斗 Electro Hydraulic Clamshell & Peel Orange Grabs Hyd. Grabs

                          2-8.油壓式抓斗                                                          3. 電油壓雙瓣和多爪抓斗及油壓抓斗

                          HYDRAULIC GRABS                                                 ELECTRO HYDRAULIC CLAMSHELL & 

                                                                                                                 PEEL ORANGE GRABS HYD. GRABS 

                       其他怪手配件 Other Excavator attachment

                             4.其他怪手配件

              Other Excavator attachment
1.抓斗各種應用 GRABS APPROVED AND RELIABLE IN ACTION                               下載down load1.抓斗各種應用GRABS APPROVED AND RELIABLE IN ACTION
      1+3.浚港水中作業抓斗
      UNDERWATER DIGGING GRABS,PRICE OF MAINTENANCE
      4+7.無污染各種散裝物品卸貨抓斗
      POLLUTION-FREE DISCHARGING GRABS FOR ALL BULK GOODS
      8.浚港水中作業電油壓抓斗
      MOTOR UNDERWATER DIGGING GRAB WITH ELECTRO-HYDRAULIC DRIVE
      9+10.馬達雙瓣抓斗處理散裝物品
      MOTOR DOUBLE-SHELL GRABS FOR THE HANDLING OF ALL BULK GOODS
      11+14 馬達驅動多爪式抓斗-處理廢鋼、垃圾、石頭和大尺寸的物品 , 每個爪可各別驅動
      MOTOR ORANGE-PEEL GRABS FOR THE HANDLING OF SCRAP,REFUSE,STONES AND

      ALL BIG-SIZED GOODS,EACH SHELL IS DRIVEN SEPARATELY
      12.馬達雙瓣式抓斗-可使用船倉卸貨用
      MOTOR DOUBLE-SHELL GRABS FOR FAST SHIP-DISCHARGING WITH WIDE AND
      CLOSED SHELLS
      13+18馬達雙瓣式水中作業抓斗-浚港取砂及清除沉澱物
      MOTOR DOUBLE-SHELL UNDERWATER GRABS FOR DIGGING OUT OF SAND AND
      CLEANING

      OF SEDIMENTS IN PURIFICATION PLANTS
      15.馬達雙瓣式抓斗-附有爪子可以插入石灰泥之混合及磚廠的混合物
      MOTOR DOUBLE-SHELL GRAB WITH SCRAPER FOR DIGGING AND MIXING OF CLAY
       AND

       ADMIXTURES AT BRICK WORKS
      16+17 附有穩定器設計的夾具及電動機械旋轉來處理石灰石
      GRAB TONGS WITH STABILIZING DEVICE AND ELECTRO-MECHANICAL SLEWING FOR
       THE

       HANDLING OF LIMESTONE
       19+20 馬達驅動雙瓣抓斗附有4支油壓缸 , 用來處理很特殊的散裝物品
       MOTOR DOUBLE-SHELL GRABS WITH 4 HYDRAULICE-CYLINDERS FOR EXTREME
       BULK

        GOODS AND DIGGING
        21+24 馬達驅動多爪式抓斗用來處理大尺寸、不對稱的物品 , 在長物品可關閉2-4或6爪
       MOTOR ORANGE-PEEL GRABS FOR THE HANDLING OF BIG-SIZED OR UN-
        SYMMETRICAL

        GOODS , AT LONG PIECE GOODS , CLOSING OF EACH 2-4 OR 6 SHELLS
        22+25 馬達驅動多爪式抓斗-用來處理長和短的木頭
        MOTOR ORANGE-PEEL GRABS FOR THE HANDLING OF LONG AND SHORT LOGS
        23.馬達驅動圓木頭抓斗-處理長、短、成綑和大樹幹
        MOTOR ROUND-LOG GRAB FOR LONG AND SHORT LOGS ,BUNDLES AND TRUNKS
        27.多爪式油壓抓斗-可連接到油壓器具 , 插取或鏟起大尺寸物品
        ORANGE-PEEL HYDRAULIC GRABS FOR CONNECTING TO HYDRAULIC APPARATUS
        AS

        DREDGERS , SHOVELS ETC. FOR
        BIG-SIZED GOODS
        28+29 油壓木頭夾具-來處理圓形物、成綑木頭和大樹幹並可藉油壓來旋轉
        HYDRAULIC LOG TONGS FOR THE HANDLING OF EVERY ROUND AND BUNDLE LOG

        AND TRUNKS WITH SLEWING DEVICE FOR HYDRAULIC APPARATUS
        30.圓形電動夾具-電油壓驅動 , 防熱可作業達600~800℃高溫
        ROUND ELECTRODE TONGS WITH ELECTRO-HYDRAULIC DRIVE AND HEAT-SHIELD

        FOR 600~800℃ CELSIUS TEMPERATURE
        31.電動機械鋼捲夾具
        ELECTRO-MECHANICAL COIL TONGS FOR PLATE-RONDES
        32.電動機械平行夾具-用來處理鐵路輪子
        ELECTRO-MECANICAL PARALLEL TONGS FOR RAILWAY-WHEELS
        33+34.單索式雙瓣抓斗-卸放煤碳
        MONOROPE DOUBLE-SHELL GRABS AT THE DISCHARGE OF COAL
        35.單索式雙瓣抓斗-利用甲板吊車卸貨
        MONOROPE DOUBLE-SHELL GRAB AT DISCHARGE, HANGING ON A SHIP-DECK
        CRANE
        36+37.四索式雙瓣整緣抓斗-卸放鐵礦砂
        FOUR-ROPE DOUBLE-SHELL TRIMMING GRABS AT THE DISCHARGE OF ORE
        38.單索式雙瓣抓斗
        MONO-ROPE DOUBLE-SHELL GRABS
        39.四索式雙瓣抓斗-有2支抓桿來卸放碎石
        FOUR-ROPE DOUBLE-SHELL GRAB WITH 2 GRAB RODS AT THE DISCHARGE OF
        GRAVEL 
        40.四索式雙瓣抓斗-有S型抓桿
        FOUR-ROPE DOUBLE-SHELL GRAB WITH S-SHAPED GRAB RODS
        41.四索式多爪抓斗-處理廢車
        FOUR-ROPE ORANGE-PEEL GRAB AT HANDLING OF CAR-SCRAP
        42+43.二索式多爪抓斗-在廢車處理回收場
        TOW-ROPE ORAGNE-PEEL GRABS AT A CAR-SCRAP RECYCLING PLANT
        44.四索式雙瓣抓斗
        FOUR-ROPE DOUBLE-SHELL GRABS IN ROD AND TRIMMING-EXECTUION
  
2. 抓斗種類 Different Kinds of Grabs
     2-1.無線遙控控制抓斗RADIO REMOTE CONTROL GRABS                                          下載down load2-1.無線遙控控制抓斗RADIO REMOTE CONTROL GRABS
           特性 :CHARACTERISTICS
         - 可使用各種倒入式的裝卸貨BE USED FOR ALL KIND OF POURING LOAD AND UNLOAD
         - 單一鋼索吊車設計DESIGNED FOR SINGLE WIRED CRANES
         - 勿需電力或馬達 , 只用電池作業NO NEED ANY ELECTRIC SUPPLY OR MOTOR , RUN
           WITH BATTERY
         - 藉由無線控制開斗 , 藉著鋼索設備來關閉OPENS BY RADIO REMOTE CONTROL ,
           CLOSES

           BY ROPE EQUIPMENT

     2-2.電油壓雙瓣式抓斗ELECTRO HYDRAULIC CLAMSHELL GRABS                         下載down load2-2.電油壓雙瓣式抓斗ELECTRO HYDRAULIC CLAMSHELL GRABS
           特性 : CHARACTERISTICS
         - 可使用來作各種倒入式裝卸貨BE USED FOR ALL KIND OF POURING LOAD AND
           UNLOAD
         - 開關抓斗 , 藉著電動油壓馬達OPEN AND CLOSED BY ELECTRIC HYDRAULIC MOTOR

     2-3.電動油壓多爪式抓斗                                                                                                      下載down load2-3.電動油壓多爪式抓斗ELECTRIC HYDRAULIC ORANGE PEEL GRABS
          ELECTRIC HYDRAULIC ORANGE PEEL GRABS      
          特性CHARACTERISTICS
        - 可使用來作廢鐵和打撈清港 , 裝卸用BE USED FOR LOAD AND UNLOAD SCRAP AND

          UNDERSEA DRAGGING
        - 開關抓斗 , 藉著電動油壓馬達OPEN AND CLOSED BY ELECTRIC HYDRAULIC MOTOR
     2-4.機械式單索式雙瓣式接觸開啟抓斗                                                                          下載down loadhttp://www.hwe-wang.com.tw/templates/cache/4262/images/1001002C2-3.ELECTRIC-HYDRAULIC-ORANGE-PEEL-GRABS.pdf

           MECHANICAL SINGLE WIRED TOUCH DOWN CLAMSHELL GRABS
           特性CHARACTERISTICS
         - 使用作為各種倒入式裝卸貨USED FOR ALL KIND OF POURING LOAD AND UNLOAD
         - 單一鋼索吊車設計DESIGNED FOR SINGLE WIRED CRANES
         - 當接觸到地面即可開啟OPENS WHEN TOUCH DOWN

     2-5.機械式接觸地面多爪式抓斗                                                                                      下載down load2-5.機械式單索接觸地面多爪式抓斗MECHANICAL SINGLE WIRED TOUCH DOWN ORANGE PEEL GRABS

           MECHANICAL SINGLE WIRED TOUCH DOWN ORANGE PEEL GRABS
           特性CHARACTERISTICS
         - 使用作為各種倒入式裝卸貨USED FOR ALL KIND OF POURING LOAD AND UNLOAD
         - 單一鋼索吊車設計DESIGNED FOR SINGLE WIRED CRANES
         - 當接觸到地面即可開啟OPENS WHEN TOUCH DOWN

     2-6.機械式雙索雙瓣抓斗                                                                                                  下載down load2-6.機械式雙索雙瓣抓斗MECHANICAL DOUBLE WIRED CLAMSHELL GRABS

           MECHANICAL DOUBLE WIRED CLAMSHELL GRABS
           特性CHARACTERISTICS
         - 使用作為各種倒入式裝卸貨USED FOR ALL KIND OF POURING LOAD AND UNLOAD
         - 設計作為雙捲桶吊車DESIGNED BY DOUBLE DRUM CRANES
         - 鋼索可在空中開啟OPENS ON AIR BY ROPE EQUIPMENT


     2-7.機械式雙索式多爪抓斗                                                                                            下載down load2-7.機械式雙索式多爪抓斗MECHANCE DOUBLE WIRED ORANGE PEEL GRABS

           MECHANCE DOUBLE WIRED ORANGE PEEL GRABS
           特性CHARACTERISTICS
         - 使用煤碳,廢鐵, 石頭之裝卸BE USED FOR LOAD AND UNLOAD COAL , SCRAP , ROCK
         - 設計作為雙捲桶天車DESIGNED BY DOUBLE DRUM CRANES
         - 鋼索可在空中開啟OPENS ON AIR BY ROPE EQUIPMENT

     2-8.油壓式抓斗HYDRAULIC GRABS                                                                           下載down load2-8.油壓式抓斗HYDRAULIC GRABS
           特性CHARACTERISTICS
         - 使用作為各種材料之裝卸貨BE USED FOR ALL KIND OF LOADING AND UNLOADING
         - 設計作為走行吊車用DESIGNED FOR MOBILE CRANE
         - 藉油壓系統來作開閉OPENS AND CLOSES BY HYDRAULIC SYSTEM

3. 電油壓雙瓣和多爪抓斗及油壓抓斗                                                                           下載down load3. 電油壓雙瓣和多爪抓斗及油壓抓斗Electro Hydraulic Clamshell & Peel Orange Grabs Hyd. Grabs
          Electro Hydraulic Clamshell & Peel Orange Grabs Hyd. Grabs
     3-1.多爪式電油壓抓斗處理溶煉金屬和碼頭邊卸貨
          ELECTRO HYDRAULIC FOR THE METALLURGY AND THE DOCK SIDE DISCHARGE
     3-2.多爪式電油壓抓斗處理溶煉金屬和碼頭邊卸貨-規格尺寸
          ELECTRO HYDRAULIC FOR THE METALLURGY AND THE DOCK SIDE DISCHARGE-
          SPECIFICATION
     3-3.多爪式電油壓抓斗處理垃圾廢物和輕物品
          ELECTRO HYDRAULIC GRABS FOR WATERS AND LIGHT MATERIAL HANDLING
     3-4.多爪式電油壓抓斗處理垃圾廢物和輕物品-規格尺寸
          ELECTRO HYDRAULIC GRABS FOR WATERS AND LIGHT MATERIAL HANDLING-
          SPECIFICATION
     3-5.雙瓣式電油壓抓斗作為天車和碼頭吊車使用
          ELECTRO HYDRAULIC GRABS FOR TRAVELLING CRANES AND DOCK SIDE CRANES
     3-6.雙瓣式電油壓抓斗作為天車和碼頭吊車使用-規格尺寸
          ELECTRO HYDRAULIC GRABS FOR TRAVELLING CRANES AND DOCK SIDE
          CRANES- SPECIFICATION

     3-7.油壓多爪式廢鐵抓斗-規格尺寸(怪手2T~11T , 貨車0.3T~2.5T)
           POLYP-GRAB FOR SCRAPS HANDLING-SPECIFICATION
     3-8.油壓多爪式廢鐵抓斗-規格尺寸(怪手6T~11T , 貨車1.2T~2.5T)
           POLYP-GRAB FOR SCRAPS HANDLING
     3-9.油壓多爪式抓斗作不同材料處理用(怪手3T~11T , 貨車0.3T~2.5T)
           POLYP-GRAB FOR SCRAPS AND DIFFERENT MATERIALS HANDLING
     3-10.油壓多爪式廢鐵抓斗(怪手8T~14T , 貨車1.5T~3T)
            POLYP-GRAB FOR SCRAPS HANDLING
     3-11.油壓多爪式廢鐵和不同材料處理(怪手11T~16T  RP350型 , 14T~19T RP500型)
             POLYP-GRAB FOR SCRAPS AND DIFFERENT MATERIALS HANDLING
     3-12.油壓多爪式廢鐵和不同材料處理(怪手14T~20T  RV400型 , 18T~23T RV500型)
            POLYP-GRAB FOR SCRAPS AND DIFFERENT MATERIALS HANDLING
     3-13.油壓多爪式廢鐵和不同材料處理(怪手22T~30T  RV600型 , 24T~32T RV800型)
            POLYP-GRAB FOR SCRAPS AND DIFFERENT MATERIALS HANDLING
     3-14.油壓多爪式廢鐵和不同材料處理(怪手30T~40T  RV1000型 , 35T~45T RV1500型)
            POLYP-GRAB FOR SCRAPS AND DIFFERENT MATERIALS HANDLING
     3-15.油壓多爪式抓斗-垃圾和輕材料用(怪手6T~15T , 貨車0.8T~2.5T)
             GRABS FOR WASTRS AND LIGHT MATERIALS HANDLING
     3-16.油壓多爪式抓斗-垃圾和輕材料用(怪手15T~32T)
            GRABS FOR WASTRS AND LIGHT MATERIALS HANDLING
     3-17.油壓抓斗處理方形物(怪手12T~17T RM400型 , 18T~24T RM601型 , 25T~40T RM901型)
            POLYP-GRAB FOR BLOCKS HANDLING
     3-18.油壓破碎和分類抓斗(怪手3T~6T RS200型 , 6T~10T RS300型 , 10T~16T RS400型)
            DEMOLITION AND SORTING GRABS
     3-19.油壓破碎和分類抓斗(怪手13T~19T RS500型 , 14T~20T RS600型 , 19T~25T RS800型)
            DEMOLITION AND SORTING GRABS
     3-20.油壓破碎和分類抓斗(怪手22T~28T RS1000型 , 24T~30T RS1150型 , 26T~32T RS1300
             型) DEMOLITION AND SORTING GRABS
     3-21.油壓式抓斗作為木頭和不同材料用(怪手2.5T~10T , 貨車0.3T~2T)
            GRABS FOR LOGS AND DIFFERENT MATERIALS HANDLING
      3-22.油壓式抓斗作為木頭和不同材料用(怪手2.5T~11T , 貨車0.3T~2.5T)
             GRABS FOR LOGS AND DIFFERENT MATERIALS HANDLING
      3-23.油壓式抓斗作為木頭和不同材料用(怪手12T~17T R50/401型 , 18T~25T R50/604型)
             GRABS FOR LOGS AND DIFFERENT MATERIALS HANDLING
      3-24.油壓式抓斗作為木頭和不同材料用(怪手23~30T R50/802型 , 24T~32T R44/802型 ,
            26T~35T R44/900型)
            GRABS FOR LOGS AND DIFFERENT MATERIALS HANDLING
      3-25.油壓抓斗作為鐵軌枕木和其他不同材料用(怪手13T~18T R53LE型 , 16T~23T R53型)
            GRABS FOR RAILWAY SLEEPERS AND DIFFERENT MATERIALS HANDLING
      3-26.油壓抓斗作為鐵路軌道和其他不同材料用(怪手13T~20T R55.1型 , 14T~21T R55.2型 ,
              23T~35T R56型)
             GRABS FOR RAILWAY TRACKS AND DIFFERENT MATERIALS HANDLING
      3-27.油壓雙瓣抓斗作為掘土和不同材料裝貨用(怪手1.5T~3T , 貨車0.2T~0.8T)
            GRABS FOR DIGGING AND DIFFERENT MATERIALS LOADING
      3-28.油壓雙瓣抓斗作為掘土和不同材料裝貨用(怪手3T~6T , 貨車0.4T~2T)
             GRABS FOR DIGGING AND DIFFERENT MATERIALS LOADING
      3-29.油壓雙瓣抓斗作為不同材料裝貨用(怪手4T~7T , 貨車0.5T~2T)
            GRABS FOR DIFFERENT MATERIALS LOADING
      3-30.油壓雙瓣抓斗作為不同材料裝貨用(怪手4T~7T , 貨車0.7T~2.2T)
            GRABS FOR DIFFERENT MATERIALS LOADING
      3-31.油壓雙瓣抓斗作為不同材料裝貨用(怪手4T~7T , 貨車0.8T~2.2T)
            GRABS FOR DIFFERENT MATERIALS LOADING
      3-32.油壓雙瓣抓斗作為不同材料裝貨用(怪手6T~12T R41/300-500型, 12T~20T R41/700-
             1200型 ,

             貨車1T~2.5T R41/300-500型)
             GRABS FOR DIFFERENT MATERIALS LOADING
      3-33.油壓雙瓣抓斗作為掘土裝貨用(怪手6T~14T , 貨車1T~3T)
             GRABS FOR DIGGING AND LOADING
      3-34.油壓雙抓斗-適合挖土用(怪手9T~18T)
             GRABS FOR DIGGING
      3-35.油壓雙抓斗-適合挖土用(怪手14T~22T)
            GRABS FOR DIGGING
      3-36.油壓雙抓斗-適合挖土用(怪手20T~32T R34型 , 30T~50T R35型)
            GRABS FOR DIGGING
       3-37.油壓抓斗-適合不同材料裝貨用(怪手18T~26T R40型 , 22T~32T R34型)
            GRABS FOR DIFFERENT MATERIALS LOADING
       3-38.油壓抓斗-適合裝貨用(怪手大於35T , 碼頭吊車大於5T)
            GRABS FOR LOADING
       3-39.棧板貨叉(貨車0.3T~2.5T) RALLET-FORK
       3-40.油壓抓斗-適合打包磚塊和不同材料處理用(怪手2T~10T , 貨車0.3T~2.5T)
             GRABS FOR BRICK PARCELS AND DIFFERENT MATERIALS HANDLING
       3-41.油壓貨叉-適合肥料和其他用途(怪手2T~9T R69-70-71-74FR型 , 9T~25T R175-176型 ,

              貨車0.3T~2.5T R69-70-71-74FR型)
              FORKS FOR MANURES AND DIFFERENT HANDLING
       3-42.油壓抓斗-適合甜菜及其他同途(怪手4T~9T R10-R12型 , 9T~25T R12.5-R13型 ,

              貨車0.7T~2.5T R10-R12型)
              GRABS FOR BEETS AND DIFFERENT MATERIALS HANDLING
       3-43.油壓渦輪螺旋錐WORM AUGERS
       3-44.捲管器HOSE REEL
       3-45.油壓旋轉頭HYDRAULIC ROTATORS
       3-46.油壓旋轉頭HYDRAULIC ROTATORS
  

      4.其他怪手配件 Other Excavator attachment                                                              下載down load2-8.油壓式抓斗HYDRAULIC GRABS

      4-1.定製配件專家      Custom Attachment Experts  

      4-2.抓斗     Grapples  

      4-3.XCCG2 系列- 型號和規格      XCG2 Series- Models and specifications

      4-4/5/6.實際圖 Photo