2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW
點擊圖片放大商品名稱:
2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW
詳細介紹:
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load
2-3.說明INTRODUCTION
2-4.訂購資料 ORDERING INFORMATION
2-5.訂購資料 ORDERING INFORMATION
2-6.MBE 型直流磁鐵操作剎車
TYPE MBE DC MAGNET OPERATED BRAKES
2-9.MBT 3相AC油壓致動剎車
TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES
2-10.MBT和MBTE 3相AC油壓致動剎車
TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES
2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING
2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES
2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application
2-14.BEM型DC電磁-油壓鼓式剎車
Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES
2-15.BEM型DC電磁-油壓鼓式剎車
Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES
2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力
The Dimensions and Rating of Type BEM SHOE BRAKES
2-17.BTM和BTME油壓-3相AC油壓致動剎車
MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES
2-18.BTM和BTME油壓-3相AC油壓致動剎車
MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES
2-19.BTM和BTME油壓致動剎車尺寸表和額定能力
DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES
2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型
MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES
2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM
2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW
2-23.聯軸器BRAKE WHEELS COUPLINGS
2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS
2-25.DC電磁剎車整流器和控制器-BE和BEM型
DC MAGNET BRAKE RECTIFIERS/CONTROLLERS
2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES
The ABW Type Brake Wheels are manufactured from specially formulated ductile-iron alloy 臼 stings.This material has great strength. good machlnability and is resistant to scoring. It Is ∞mpatible with a variety of friction materials，where as the IIning and the brake wheel
wear evenly and smoothly. Fully machined wheels can be supplied with a parallel or tapered bore and keyway to meet the customer's specifications.Tapered bored hubs can be provided with a bent lock washer slot to give a
more positive method of locking the wheel to the shaft. The wheels can be furnished completely machined 10 provide proper balance at normal operating speds. Brake wheels can also be furnished semi-finished with a solid or rough bored hub for tinal machining by the customer. Standard wheel dimensions are shown on the table below; wheels that do not fall wilhln these dimensional parameters may slill be avaìlable，please contact the factory.
- STANDARD FEATυRES 線畫展特性
- Manufactured from ductile-Iron alloy
- Completely machined 10 provide proper balance at normal operating speeds.
- Resistanl10 scoring
- Wears smoothly and evenly
- Good ∞mpalibilltywilh friction materials
- OPTIONAL FEATURES 選用特性
- Parallel bore and keyway
- Tapered bore and keyway
- Lock washer slol
- Speclal materials，1001stee，l etc.
- Deep rburizlhg
- Chrome plated brake path
- DynamÎc balancing
- Non-destructive testìng
- Brake wheel couplings
- SELECTING BRAKE WHEEL HUB OFFSET
- 1. Start from the wheel centerlne and determine offset dimension "0" within Ihe maximum and minimum dimensions provided in table below.
- Determine hub length， dimensìon "E" required.
- Use the followlng formula to see if dimension "F" value falls within the limits provided in the table below.
4， Ifthe . dìmension does not fall within Ihe limits provided In the table. change dimension "0" wlthin limits provided ln the table."X" = "E" - "0" (may be a pos. or neg. value) "F" (1/2"C")- “X.
- avaìlability，Note that more than one wheel pattem Is avail.5. Wheels thaldo not fall within the limits provided In the table below must be checked wiU Ihe factory for cost and
- BORE AND KEYWAY MACHINING
- For machining wheel bores and keyways.please provide complete shaft dimenslonal data.
- For tapered shafts. don't forget the "taper per fool" data
- For parallel bores provide complete keyway dimenslons and advise if gib key or keeper plate wìll be used to hold the wheel 10 the shaft ，For standard AISE-NEMA DC or AC wound rotor motors
- ，only the motor information is required• For non-standard motors and special wheels， please conlact taclory.
Rating Data and Approximate Dimensions /Weights
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
更多商品
2-23.聯軸器BRAKE WHEELS COUPLINGS
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES BRAKE WHEEL COUPLlNGS 煞建設聯軍自認 The brake wheel couplings are available for all 300M Series shoe brakes. They are useful in situations where space is limited and also eliminale the need for expensive double shaft extensions on motors and gearboxes. SELECTION 選擇用途 Torque ratings Ilsted are Iypical values for Ihe 300M Seríes brakes based on normal operatlon of Ihe drive syslems. For repelilíve hígh peak load applícatíons please contact Ihe factory. Maximum speeds (RPM) are based on Ihe maximum RIM velocíty of 6000 feelper minule. Brake wheels and couplíngs muslbe balanced if perípheral speeds exceed his value. Couplings are normally furníshed wilh an average inlerference filof 0.0005" per inch of shaft diamele，r unless otherwise specified. Double engagement brake wheel couplings requi 的 realignmenlof Ihe brake wheel 10 Ihe brake if parallel misalignmenlbecomes excessive due 10 ílting of wheel and sleeve assembly. The high Ugalforces en∞untered In ∞uplings separale the base oíl and Ihickener of general-pu巾ose. Speclal long-term grease (LTG) onJy should be used. Standardcoupling seaJs are BUNA-N ma erial. Maximum continuous operating lemperalure is 250'F (121'C) and maximum intermittent (Iess than 1000 hours) operallng lemperature is 300. F (1490 C). For unlisled brake torques and couplíng types，please consult Ihe factory.• Melric sizes are oplional. BRAKE WHEEL COUPLlNG ORDERING INFORMATION 煞車111車自認訂購資料 1) Specify coupllng (If selecting from the s!andard unlts shown on 內. 26 simply specify t怕也talog number. Example 13" x 5.75" -1025G) or íf nolknown please supply Ihe fOllowlnginformation: Brake wheel diameter and fa 個 widlh Molor HP and RPM (or speed) of shaft Ihat the brake wheel ís to be mounled Gear ratío or shaft speeds Delails of Ihe appli叫 ion 2) Specify hub bores and keyway dimensions
2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURESApproximate Dimensions (inches) 近似尺寸(美的) AB x JB I REF c L " MA MB MAX MC MD MAX NB FIG 可 & 3 NB FIG 2 NC ZD ZE GAP CATALOG# 們G1 FIG 2 & 3 8 X3.25 - 1015G 10 X 3.75 -1015G 可 3 X 5.75 -1020G 13 X 5.75 -1025G 可 6 X 6.75 -1025G 19 X 8.75 -1030G 19 X 8.75 - 1035G 23 X 11.25 -1040G 23 X 司1 25 -1040G 30 X 14.25 - 1050G 30 X 14.25 - 1050G 1.94 1.94 2.44 3.03 3.03 3.59 4.19 4.75 4.75 6.03 6.03 1.82 1.82 2.30 2.90 2.90 3.46 4.02 4.54 4.54 5.80 5.80 2.40 2.40 3.00 3.60 3.60 4.20 5.10 5.70 5.70 7.20 7.20 4.50 5.00 5.62 625 6.38 7.00 7.12 8.20 8.31 8.50 9.62 2.90 2.90 3.50 4.10 4.72 5.88 6.58 7.82 8.26 10.63 9.76 0.56 0.88 0.75 1.12 。25. 0.12 0.00 0.44' 0.44' 44.00 0.61 0.92 0.80 1.14 0.14 0.23 0.12 0.05 39.00 37.00' 37.00' 1.47 2.03 2.91 3.19 2.69 3.31 3.47 4.59 4.16 5.38 6.00 0.94 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.31 1.75 2.37 3.00 3.50 4.00 4.50 4.5再 5.00 5.00 5.50 6.00 6.75 7.75 0.625 0.625 0.625 0.750 0.750 0.750 1.000 1.000 1.000 1.312 1.312 0.660 0.660 。0.660 .750 0.750 0.750 0.980 1.050 1.050 1.360 1.360 Maximum Operating Misalignment 續六線作失線(沒對正} For construction purposes request certified drawing SIZE DOUBLE ENGAGEMENT SINGLE ENGAGEMENT P。ARALLEL INCHES ANGULAR PARALLEL OFFSET INCHES ANGULAR INCHES DEGREES INCHES DEGREES '5G 1020G 1025G 1030G 1035G 1040G 1050G 0.005 0.010 0.010 0.012 0.012 0.012 0.012 0.005 0.010 0.010 0.015 0.015 0.020 0.020 1 /4 1 /4 1 /4 1 /4 1 /4 1 /4 1 /4 00 Not Use Single EngagemenlCoupllngs 10 Compensate For Parallel Offset Mlsalìgnment 0.005 0.010 0.010 0.015 0.015 0.020 0.020 1f8 118 118 1 /8 118 118 1/8 Maximum Operating Misalignment BR。AKEWHEEL AB JB COUPLlNG REF. BRAKE RATING (也.FT.) MILL MOTOR SIZE MAX SPEED RPM MIN BORE (1) WEIGHTLBS. WK'(LB.FT.) WHEEL AND COUPLlNG LUBE WHEEL AND COUPLlNG COUPLlN. G (NO BORE) CATALOG# 8 X 3.25 -1015G 10 X 3.75 - 1015G 13 X 5.75 - 1020G 13 X 5.75 -1025G 16 X 6.75 - 1025G 可 9 X 8.75 -1030G 19 X 8，75 -1035G 23 X 11.25 - 1040G 23 X 11.25 - G。 30 X 14.25 . 1050G 30 X 14.25. 1050G 100 200 550 550 1000 2000 2000 4000 4000 9000 9000 2，602 603.604 606 608 610 612 614 616 618 620 622 2860 2290 1760 1760 1430 1200 1200 995 995 765 765 0.75 0.75 1.00 1.25 1.25 1.50 2.00 2.50 2.50 3.50 3.50 33 40 80 110 170 170 225 390 390 900 900 0.20 0.20 0.30 0.60 0.60 0.90 1.25 2.00 2.00 4.12 4.12 1.4 3.5 13.1 14.7 33.0 81.0 87.0 230.0 230.0 700.0 700.0 0.486 0.486 1.040 2.680 2.680 4.900 11.300 21.600 21 600 62.500 62.500 (1) For bores less lhan mlnlmum values shown above ∞nsult factory (Flexible and Rigîó HUb).
2-25.DC電磁剎車整流器和控制器-BE和BEM型DC MAGNET BRAKE RECTIFIERS/CONTROLLERS
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES AC STATIC RECTIFIERS The AC Static/Rec ifier Controller is designed 10 operate the BE and BEM Type，AISE-NEMA shunt wound 50 volt DC shoe brakes installed on AC powered equipment. The basic unit consists of a multi-tapped power transformer，bridge rectifier， contactor，statlc control PCB and a protective circuit breaker，all CON iROl CIRCUI1 mounted on a steel backing plate for pan自I mounting on customer's equipment. The unit is designed with a slalicliming ÀC CONNEC r'ON circui，l which elìminates relay conlacls. The economizing circuil reduces power ∞nsumptlon and assures fast brake release when power is removed. The forcing circullassures faslbrake release when Ihe power is initially applied 10 the brake. AII models are equipped with a multi-tapped p吋mary lransformer for 230V， 460V and 575V slngle-phase power supplies. OPTIONAL FEATURES NEMA-Type 3R Enclosures NEMA-Type 4 Enclosures Anli-condensation healer Timedelay (Diode→llounted Inside enclosure) Timedelay (Adjustable-customer mounted) ORDERING CODE Brake Controller Designation-ABC Quantity and Síze of Brakes Type of Enclosure-(3R or 4) Power Supply 230， 460， 575 VAC/3Ph/60Hz Designates an AC Statíc Reclifier to control a single 10" MBE Brake in a NEMA 3R Enclosure from a 460V/60Hz power supply. OPERATION 操作說明 The static rectlfier/controller shown in Fig. 1 is equipped with two eleclronlccircuits one for releasing Ihe brakes quicl<ly (forcin9) and energizing the brake ∞i1.When the AC vol is applied 10 thereclifiers (diod) 10 nvert AC inpul10 a full wave DC output forthe olher for maintaining the brakes In the released position.The system utilizes silicon ntrolled rec (SCR's) and sili n ∞ntrol system. the brake relay (BR) is eneized and the two SCR's ∞nduct on allemawe half cycles.Thls results in approximalely 100 volts being applied to the brake coil. The SCR's are triggered by a ee running uni-junction oscillator which operates for approximateiy one se nd. At the end of the perìod， conduction through Notes:the SCR's and the brake holding current is maintained by the 24V AC nsformer and rectifler stack cirωit. Normally the inpullo the ansfoler L1and L2 would be connecled 10 the terrninals of the driving molor and the brake woutd opera!e when power is appiled 10 the molor.If desired the transforrner may be nnected 10 a fixed AC supply and the brake can be operated by relay (BR) from an ex1emal system. This is achieved by remof19 Iink5 4 and 5，and Iinks 6 and 7 of the brake Normal forcing 15 100VDC and normalholdlng 15 20VDC.If requlred. two 50V shunt Wound，brake ∞i15 can be connected in serles and opera!ed from a suibly rated staUc rectlfier ∞nlroller. In thì5 case the inìtial forcing voltage of Ihe controller Is 200VDC and lhe holding voltage 15 40VDC.
2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES The standard 300M Sees of AISE-NEMA shoe brakes are sui ble for operalion Indoors. on moist. or dusty applications. When inslIed outdoors or in extremely welor abrasive dust environments. 50me type of brake enclosure is re∞mmended. There are three types of enclosures available to suit a wide variety of installations. Drip Proof- this oonsìsts of a simple paIcover. which extends over the top of the brake wheel and shoes Type 3R- This is a lift off enclosure， which covers the entire brake. The enclosure ìs supplied with a hinged inspection lid and can be provlded with one or two shaft slots Type4一This enclosure is water-tight and dust-tìght and covers the entire brake. The enclosure Is designed with a split gasket f1anged and fitted with one or two shafl seals to suit the installation. For low temperature applications the Type 3R and Type 4 Enclosures may be fitted with a space heate﹒ STANDARD FEATURES 樣準特性 Sheet steel welded construction Primer paint finish Available for all 3 M Series brakes Dimensions avallable on reque.st TYPICAL TYPE 3R BRAKE ENCLOSURE OPTIONAL FEATURES 選用特性 Shafl seals S開闊heaters Thermostats Conduilbox Specìalpaint finish Stainlesssteel
3. 鼓式剎車HI-TORK DRUM BRAKE
3. 鼓式剎車HI-TORK DRUM BRAKE 下載down load 3-2.內容和頁數導引說明CONTENTS AND PAGE REFERENCE GUIDE 3-3.介紹說明INTRODUCTION 3-4.介紹說明INTRODUCTION 3-5.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES 3-6.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES 3-7.3相AC油壓致動器剎車 3 PHASE AC HY-THRUST TM ACTUATOR BRAKES 3-8.3相AC油壓致動器剎車 3 PHASE AC HY-THRUST TM ACTUATOR BRAKES 3-9.3相AC油壓致動器操作/防爆和防火焰剎車 3PHASE AC HY-THRUST TM OPERATED EXPLOSION-PROOF AND FLAME-PROOF BRAKES 3-10.氣動和油壓操作剎車PNEUMATIC AND HYDRAULIC OPERATED BRAKES 3-11.油壓(踏板式)剎車HYDRAULIC (PEDAL) OPERATED BRAKES 3-12.踏板操作油壓系統加到SA , ST和ST/E剎車 PEDAL OPERATED HYDRAULIC OVER-RIDE SYSTEM FOR ADDING TO BRAKE TYPES SA , SA/M , ST AND ST/E BRAKES 3-13.手輪和拉桿致動剎車HANDWHEEL AND LEVER APPLIED BRAKES 3-14.對稱和偏一邊剎車輪轂SYMMETRICAL AND OFFSET HUB BRAKE WHEELS 3-15.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS 3-16.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS 3-17.DC磁鐵剎車(SA和SA/M箱型)整流和控制器 DC MAGNET BRAKE (TYPES SA AND SA/M) RECTIFIERS AND CONTROLLERS 3-18.剎車控制箱BRAKE ENCLOSURES
3-2.內容和頁數導引說明CONTENTS AND PAGE REFERENCE GUIDE
3. 鼓式剎車HI-TORK DRUM BRAKE 下載down load 3-2.內容和頁數導引說明CONTENTS AND PAGE REFERENCE GUIDE 3-3.介紹說明INTRODUCTION 3-4.介紹說明INTRODUCTION 3-5.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES 3-6.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES 3-7.3相AC油壓致動器剎車 3 PHASE AC HY-THRUST TM ACTUATOR BRAKES 3-8.3相AC油壓致動器剎車 3 PHASE AC HY-THRUST TM ACTUATOR BRAKES 3-9.3相AC油壓致動器操作/防爆和防火焰剎車 3PHASE AC HY-THRUST TM OPERATED EXPLOSION-PROOF AND FLAME-PROOF BRAKES 3-10.氣動和油壓操作剎車PNEUMATIC AND HYDRAULIC OPERATED BRAKES 3-11.油壓(踏板式)剎車HYDRAULIC (PEDAL) OPERATED BRAKES 3-12.踏板操作油壓系統加到SA , ST和ST/E剎車 PEDAL OPERATED HYDRAULIC OVER-RIDE SYSTEM FOR ADDING TO BRAKE TYPES SA , SA/M , ST AND ST/E BRAKES 3-13.手輪和拉桿致動剎車HANDWHEEL AND LEVER APPLIED BRAKES 3-14.對稱和偏一邊剎車輪轂SYMMETRICAL AND OFFSET HUB BRAKE WHEELS 3-15.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS 3-16.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS 3-17.DC磁鐵剎車(SA和SA/M箱型)整流和控制器 DC MAGNET BRAKE (TYPES SA AND SA/M) RECTIFIERS AND CONTROLLERS 3-18.剎車控制箱BRAKE ENCLOSURES
3-3.介紹說明INTRODUCTION
3. 鼓式剎車HI-TORK DRUM BRAKE 下載down load 3-2.內容和頁數導引說明CONTENTS AND PAGE REFERENCE GUIDE 3-3.介紹說明INTRODUCTION 3-4.介紹說明INTRODUCTION 3-5.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES 3-6.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES 3-7.3相AC油壓致動器剎車 3 PHASE AC HY-THRUST TM ACTUATOR BRAKES 3-8.3相AC油壓致動器剎車 3 PHASE AC HY-THRUST TM ACTUATOR BRAKES 3-9.3相AC油壓致動器操作/防爆和防火焰剎車 3PHASE AC HY-THRUST TM OPERATED EXPLOSION-PROOF AND FLAME-PROOF BRAKES 3-10.氣動和油壓操作剎車PNEUMATIC AND HYDRAULIC OPERATED BRAKES 3-11.油壓(踏板式)剎車HYDRAULIC (PEDAL) OPERATED BRAKES 3-12.踏板操作油壓系統加到SA , ST和ST/E剎車 PEDAL OPERATED HYDRAULIC OVER-RIDE SYSTEM FOR ADDING TO BRAKE TYPES SA , SA/M , ST AND ST/E BRAKES 3-13.手輪和拉桿致動剎車HANDWHEEL AND LEVER APPLIED BRAKES 3-14.對稱和偏一邊剎車輪轂SYMMETRICAL AND OFFSET HUB BRAKE WHEELS 3-15.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS 3-16.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS 3-17.DC磁鐵剎車(SA和SA/M箱型)整流和控制器 DC MAGNET BRAKE (TYPES SA AND SA/M) RECTIFIERS AND CONTROLLERS 3-18.剎車控制箱BRAKE ENCLOSURES Magnetek's heavy-duty，cost-effective Mondel Industrial Duty Shoe Brakes are designed for a wide va巾ty of industrial and mining applications and environments. Minimal moving parts provides an extremely reliable range of brakes that are easy to install adjust and maintain. The 200S Brake Series has ampact size with low shaft height making it easy to retrofit into existing installations where space is tight Applications include:ConveyorsOverhead cranes Hoists Bridges Movable Bridges Fans Winches Tumtables Overhead Doors Lock Gates Strip Processing EquipmentOre BridgesShip LoadersOther types of machinery requirìng reliable stopping and holdingMachine Tools STANDARDFEATURES 標準特性 Environmentally safe molded non-asbestos brake linings provide a constant coefficíent of friction over the normal operating temperature range.Standardlinings are bonded to the brake shoes to provide a maximum amount of shoe wear. Brake shoes are pivoted; automatic positioners prevent the shoes from dragging on the brake wheel. Serîes wound coils for all currents.Shunt wound ∞ils for all popular voltages. AC operators are C.S.A. certified for all popular voltages and frequencies. Top hinged armatures on DC magn的 keep air gap free from dirt and debris.Hardwareís non-corrosíve. BRAKE WHEELS 剎車鼓 Standard wheels are st in a ductile iron allo Wheel material endures high temperatures and is resistant to scouring . Wheels available to meet customers' specifications ; from fully machined and balanced to semi-finished rough bored. BRAKE WHEEL COUPLNGS 剎車鼓連軸器Brake wheel coupngs avaìlable for all sizes of 200S Series brake wheels. BRAKE RECTIFIERS AND BRAKE CONTROLLERS 剎車整流和控制器 Rectifiers allow a DC magnet brake to be utili zed with an AC power supply. Hoist brake rectifiers i nclude a forci ng/hold lng circuit to minimize set and release times. Standard conlroller designed to operate BE Series brake with shunt wound 50 VDC coil. Standard controller supplied ín a NEMA 3R Enclosure.
3-4.介紹說明INTRODUCTION-02
3. 鼓式剎車HI-TORK DRUM BRAKE 下載down load 3-2.內容和頁數導引說明CONTENTS AND PAGE REFERENCE GUIDE 3-3.介紹說明INTRODUCTION 3-4.介紹說明INTRODUCTION 3-5.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES 3-6.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES 3-7.3相AC油壓致動器剎車 3 PHASE AC HY-THRUST TM ACTUATOR BRAKES 3-8.3相AC油壓致動器剎車 3 PHASE AC HY-THRUST TM ACTUATOR BRAKES 3-9.3相AC油壓致動器操作/防爆和防火焰剎車 3PHASE AC HY-THRUST TM OPERATED EXPLOSION-PROOF AND FLAME-PROOF BRAKES 3-10.氣動和油壓操作剎車PNEUMATIC AND HYDRAULIC OPERATED BRAKES 3-11.油壓(踏板式)剎車HYDRAULIC (PEDAL) OPERATED BRAKES 3-12.踏板操作油壓系統加到SA , ST和ST/E剎車 PEDAL OPERATED HYDRAULIC OVER-RIDE SYSTEM FOR ADDING TO BRAKE TYPES SA , SA/M , ST AND ST/E BRAKES 3-13.手輪和拉桿致動剎車HANDWHEEL AND LEVER APPLIED BRAKES 3-14.對稱和偏一邊剎車輪轂SYMMETRICAL AND OFFSET HUB BRAKE WHEELS 3-15.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS 3-16.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS 3-17.DC磁鐵剎車(SA和SA/M箱型)整流和控制器 DC MAGNET BRAKE (TYPES SA AND SA/M) RECTIFIERS AND CONTROLLERS 3-18.剎車控制箱BRAKE ENCLOSURES ENVIRONMENT 環境 The standard 200S Series 8rakes has been designed to function in moderately dusty and moist locations. The AC and DC actuators are sealed，encapsulated or gasketed. 8rake components and associated hardware are painted， BRAKE ENCLOSURES 剎車控制箱plated or corrosion resistant. Custom enclosures are designed to protect the brake fr its application environment. Available in NEMA 3R and NEMA 4 design ∞nfigurations. SPACE HEATERS 空間加熱器 In low temperature and/or damp10 tions，where condensation may be a problem，space heaters n be provided for mounting insid e brake enclosures.Hy-Thrust actuators are available with optional bui lt in heaters. BRAKETRONIC TM 電子剎車 AC/DC variable frequency torque control of thruster operated shoe or disc brake. HAZARDOUS LOCATIONS 危險場所 Hy-Thrust actuators are widely used in explosion-proof and f1ame-proof areas on Drum，8and， and Disc brakes for con veyors，hoists，cranes，and many other applications in the mining， petro-chemical and material handling industries INSTALLATION，MAINTENANCE AND SPARE PARTS安裝維修和備品 Specífic ínstallation，operation，and maintenance information and spare parts lists are shipped with each brake. Additional ∞pies are available on request or downloed from Mechanical and magnetíc proximity interlockllimit switches thewww.mondelenaineerina m web site. OPTIONAL FEATURES 選用 Extra wide shoes 80lted or riveted linings 8rake shoe thermostats to monitor brake wheel temperatures 8rake lining replacement waminglìnterlock system Hydraulic over-ride/parking/emergency stopping Stainless steel pivotpins Special pivot pins，fitted with lubricators，for harsh environment applications Latching manual release lever Mechanical and magnetíc proximity interlockllimit switches Tropical and corrosion protection Vertical mounting on certain models Brake Size and Type Torque HP speed of shaft on which brake is mounted (RPM) 8rake application Electrical Supply Shunt/Series Wound Coil Rating Motor data fo‘r S Series Wound Coil Duty Cycle Ambíent Temperature Optional Features For replacement brakes，provide the original brake nameplate information. Refer to Selection and Application Data section in our Product 8inder. ACCESSORIES 8rake Wheels/Couplings，RectifieIConollers， Covers， and 8raketronic. Order as required.
