- 回首頁 >
- 吊車及捲揚機 >
- L.旋臂吊車及輕型天車 >
- 8.便攜式吊架起重機 Portable Davit Cranes
8.便攜式吊架起重機 Portable Davit Cranes
商品名稱:
8-4.起重機和捲揚機 CRANES AND WINCHES
8-4.起重機和捲揚機 CRANES AND WINCHES
詳細介紹:
8.便攜式吊架起重機 Portable Davit Cranes 下載down load
8-1.500磅和1200磅容量系列 500 lb and SERIES 1200 lb Capacity
8-2.系列特點 SERIES FEATURES
8-3.系列5PA10 SERIES 5PA10
8-4.起重機和捲揚機 CRANES AND WINCHES
8-5.底座和鋼索 BASES AND WIRE ROPE
8-6.性能 PERFORMANCE
8-7.嵌平/壁掛式安裝性能等級 Flush/Wall Mount Performance Ratings
8-8.吊升到地板以下 Lift Below Floor Level
8-9.Ensign1000裝在底座上裝上性能額 Ensign 1000 on Pedestal Base Performance Ratings2
8-10.ENSIGN系列配件 ACCESSORIES FOR ENSIGN SERIES
8-11.選項 OPTIONS
更多商品
8-3.系列5PA10 SERIES 5PA10
8.便攜式吊架起重機 Portable Davit Cranes 下載down load 8-1.500磅和1200磅容量系列 500 lb and SERIES 1200 lb Capacity 8-2.系列特點 SERIES FEATURES 8-3.系列5PA10 SERIES 5PA10 8-4.起重機和捲揚機 CRANES AND WINCHES 8-5.底座和鋼索 BASES AND WIRE ROPE 8-6.性能 PERFORMANCE 8-7.嵌平/壁掛式安裝性能等級 Flush/Wall Mount Performance Ratings 8-8.吊升到地板以下 Lift Below Floor Level 8-9.Ensign1000裝在底座上裝上性能額 Ensign 1000 on Pedestal Base Performance Ratings2 8-10.ENSIGN系列配件 ACCESSORIES FOR ENSIGN SERIES 8-11.選項 OPTIONS8-2.系列特點 SERIES FEATURES
8.便攜式吊架起重機 Portable Davit Cranes 下載down load 8-1.500磅和1200磅容量系列 500 lb and SERIES 1200 lb Capacity 8-2.系列特點 SERIES FEATURES 8-3.系列5PA10 SERIES 5PA10 8-4.起重機和捲揚機 CRANES AND WINCHES 8-5.底座和鋼索 BASES AND WIRE ROPE 8-6.性能 PERFORMANCE 8-7.嵌平/壁掛式安裝性能等級 Flush/Wall Mount Performance Ratings 8-8.吊升到地板以下 Lift Below Floor Level 8-9.Ensign1000裝在底座上裝上性能額 Ensign 1000 on Pedestal Base Performance Ratings2 8-10.ENSIGN系列配件 ACCESSORIES FOR ENSIGN SERIES 8-11.選項 OPTIONS8-1.500磅和1200磅容量系列 500 lb and SERIES 1200 lb Capacity
8.便攜式吊架起重機 Portable Davit Cranes 下載down load 8-1.500磅和1200磅容量系列 500 lb and SERIES 1200 lb Capacity 8-2.系列特點 SERIES FEATURES 8-3.系列5PA10 SERIES 5PA10 8-4.起重機和捲揚機 CRANES AND WINCHES 8-5.底座和鋼索 BASES AND WIRE ROPE 8-6.性能 PERFORMANCE 8-7.嵌平/壁掛式安裝性能等級 Flush/Wall Mount Performance Ratings 8-8.吊升到地板以下 Lift Below Floor Level 8-9.Ensign1000裝在底座上裝上性能額 Ensign 1000 on Pedestal Base Performance Ratings2 8-10.ENSIGN系列配件 ACCESSORIES FOR ENSIGN SERIES 8-11.選項 OPTIONS P1 5PA5 / 5PA10 The Ensign series portable davit cranes are ideal for many applications. Simple set-up and easy to use. This economical series is specially designed for clearance, lift height, and ergonomic operation. Ensign系列便攜式吊架起重機是許多應用的理想選擇。 組裝簡單,易於使用。 這個經濟型系列專為除去,吊升高度和符合人體工程學的操作而設計, 。 500 lb and SERIES 1200 lb Capacity Portable Davit Cranes 500磅和1200磅容量系列 便攜式吊架起重機 Light and portable 輕巧便攜 Adjustable Boom Angle 可調節臂桿角度 Adjustable Sheave Block 可調式滑輪組 Quick-Mount Winch Bracket 快速安裝絞盤支架 Roller Bearing for Easy 360° Rotation 滾子軸承可容易的作360°旋轉 Manual or Power Winch Operation 手動或電動絞盤操作 Five Corrosion-Resistant Finishes 五種耐腐蝕表面處理 Easy, No-Tools Assembly/Disassembly 簡單,無工具裝配/拆卸 Variety of Bases 各種各樣的基座 2-Year Warranty 2年保修期 P2 ENSIGN SERIES ENSIGN系列 SERIES FEATURES 系列特點 ADJUSTABLE SHEAVE BLOCK Sheave easily adjusts without tools to 4 different positions allowing for a wide range of height and reach combinations 可調整的滑輪塊组 無需工具即可容易的調整滑輪,可在4種不同位置進行調整,從而實現各種高度和延伸範圍組合 ADJUSTABLE BOOM ANGLE Convenient stainless steel adjustment screw, with comfortable turning knob, allows for easy, one-hand boom adjustment when not under load. 可調整吊桿的角度 方便的不銹鋼調節螺絲,帶有舒適的旋鈕,可在不負載時輕鬆用單手調節。 QUICK-MOUNT WINCH BRACKET快速安裝捲揚機支架 A variety of Thern winches can be attached to the bracket. After a winch is attached to the bracket, the bracket is easily mounted (without tools) to any of three convenient/ ergonomic positions on the mast via quick-connect pins 各種捲揚機可以安裝在支架上。捲揚機連接到支架後,支架可藉着連接梢輕鬆安裝(無需工具)到桅杆上三個方便/符合人體工程學的位置 NYLATRON FLANGE BEARING The Ensign 500 features a nylatron bearing that supports the mast at the top of the base to assist with the crane’s 360° smooth rotation. NYLATRON法蘭軸承 Ensign 500具有一個nylatron軸承,支撐在底座頂部的桅杆,以協助起重機作360°平滑旋轉。 TAPERED ROLLER BEARING A tapered roller bearing, pinned to the bottom of the mast, allows the crane to rotate 360° under load. Standard only on the Ensign 500. 圓錐滾子軸承 圓錐滾子軸承固定在桅杆的底部,允許起重機在負載下作旋轉360°。僅限於Ensign 500為標準配備。 ROLLER/BALL BEARING* Standard on Ensign 1000, the specially designed roller/ball bearing at top of base requires no tools for installation. Allows smooth, easy 360° crane rotation under load. 滾輪/滾珠軸承* Ensign 1000的標準配備,在底座頂部專門設計的滾子/滾珠軸承無需安裝工具。 可平滑,容易的作360°使起重機在負載下旋轉。 STAINLESS STEEL LOCK* Stainless steel lock assembly keeps crane in position during winch operation and when not in use. Included with roller/ball bearing. 不銹鋼鎖住機構* 不銹鋼鎖住組件在捲揚機操作期間和不使用時將起重機保持在適當位置。 包括滾子/滾珠軸承。 Sheave 4.5 lb / 2.0 kg 滑車輪 4.5磅/2.0公斤 Boom 28.5 lb / 12.9 kg 吊桿28.5磅/12.9公斤 Adjustment Screw 3.2 lb / 1.5 kg 調整螺絲 3.2磅/ 1.5公斤 Bracket 3.4 lb / 1.5 kg (5PA5) 5.7 lb / 2.6 kg (5PA10 支架 3.4磅/1.5公斤 (5PA5) 5.7磅/2.6公斤 (5PA10 Rotation Handle 1.6 lb / .7 kg 迴轉 手把1.6磅/ .7公斤 Mast 20.3 lb / 9.2 kg 桅杆 20.3磅/9.2公斤 Pedestal Base 19.2 lb / 8.7 kg 基座 19.2磅/8.7公斤 Model Shown 5PA5-M1 顯示型號5PA5-M1 Flush Mount Base 19.2 lb / 8.7 kg 嵌入式底座 19.2磅/8.7公斤 Wall Mount Base 20.7 lb / 9.4 kg 壁掛式底座 20.7磅/ 9.4公斤 These products are not for lifting people, or things over people 這些產品不可吊舉人員,也不可吊物在人員頭上 *Not available on the Ensign 500 * Ensign 500不提供 P3 FEATURES AND BENEFITS 特點和好處 SERIES 5PA10 CAPACITY 1200 LB (544 KG) 系列5PA10 容量1200磅544 KG Sheave 6.2 lb / 2.8 kg 滑車輪 6.2磅/2.8公斤 Boom 52.9 lb / 24.0 kg 吊桿 52.9磅/ 24.0公斤 Adjustment Screw 6.4 lb / 2.9 kg 調整螺絲 6.4磅/2.9公斤 Mast 52.4 lb / 23.8 kg 桅杆 52.4磅/23.8公斤 Model Shown 5PA10-E2 With stainless steel finish, 4WP2-K electric winch and 5BP 顯示型號5PA10-E2 為不銹鋼處理,4WP2-K電動 捲揚機和5BP Rotation Handle 1.8 lb / .8 kg 迴轉 手把1.8磅/ 手把.8公斤 Bearing (Availble only on 5PA10) 9.4 lb / 4.3 kg 軸承 (僅適用於5PA10) 9.4磅/4.3公斤 Pedestal Base 51.9 lb / 23.6 kg 基座 51.9磅/23.6公斤 Rotation Handle 1.8 lb / .8 kg 迴轉 手把1.8磅/ .8公斤 Swaged Ball Fitting 鍛造球 配件 Wire Rope Keeper 鋼絲繩 保持器 Wire Rope Cable Reel 鋼絲繩 捲取盤 Flush Mount Base 43.7 lb / 19.8 kg 嵌入式底座 43.7磅/19.8公斤 Wall Mount Base 48.5 lb / 22.0 kg 壁掛式底座 48.5磅/ 22.0公斤 These products are not for lifting people, or things over people. 這些產品不可吊舉人員,也不可吊物在人員頭上 。 TRADITIONAL FEATURES 傳統特色 MANUAL OR POWER operation 手動或電動操作 Ddavit cranes can be configured with a manual winch for short, infrequent lifts or a power winch for longer lifts or heavier loads. Choose from Thern’s spur or worm gear hand winches or power winches with 115/1/60 as standard. Other voltages available as well as pneumatic, hydraulic or DC Volt power operation. 吊桿起重機可以配置一個 手動捲揚機作為短時間,不常吊升或一個 動力捲揚機用於更長的吊升或更重的負載。 選擇Thern的正齒輪或蝸輪手 捲揚機或動力捲揚機,115/1/60為 標準。 其他電壓也可用 如氣動,液壓或直流電壓 操作。 CORROSION RESISTANT FINISH Electrostatic powder coated crane and stainless steel fasteners combine to resist corrosion in harsh environments. Other options available include: galvanized, stainless steel and epoxy finishes. 耐腐蝕表面處理 靜電粉末塗層起重機和 不銹鋼緊固件結合起來防止 在惡劣環境中腐蝕。 其他 可用的選項包括:鍍鋅, 不銹鋼和環氧樹脂處理。 EASY ASSEMBLY/DISASSEMBLY Quick-release stainless steel pins allow for easy assembly and quick disassembly for transport or storage. No tools required. 易於組裝/拆卸 快速釋放不銹鋼梢允許 易於組裝和快速拆卸 適合運輸或儲存。 無需工具。 QUICK DISCONNECT ANCHOR For quickly attaching or removing wire rope equipped with a swaged ball fitting - Allows the operator to leave the wire rope attached to the load at all times and simply remove the rope from the winch and attached to the optional wire rope keeper or cable reel. 快速斷開錨 用於快速連接或移除鋼絲繩 配備有鍛造球配件 - 允許 操作員留下鋼絲繩始終接到 負載,並且可簡單移去從捲揚機繩索和附加到 可選的鋼絲繩保持器或鋼纜捲筒。 VARIETY OF BASES Pedestal, flush and wall mount bases allow for a variety of mounting solutions and are easily installed to a variety of solid surfaces with anchor bolts or other fastening methods. Bases sold separately. Base cap included with lanyard keeps water and debris out of base when crane is removed. 多種多樣的底座,嵌入式和壁掛式底座 允許適用於各種安裝解決方案 而且使用錨螺栓或其他緊固方法易於安裝到各種固體表面 , 底座分開出售。 包括底座蓋 掛上繩索, 當拆除起重機時。 可以防止水和碎屑從基座流出 2 -YEAR WARRANTY Industry-leading two-year limited warranty on all our products. 2年保修期 工業領先,我們所有產品有兩年限制 保修。 P4 CRANES AND WINCHES 起重機和捲揚機 FINISHES Crane Finishes for Ensign Series All cranes come standard with Electrostatic Powder Coat red finish. Four optional finishes also offered are Galvanized, 304 or 316 Stainless Steel, and corrosion-resistant Epoxy. Custom colors are available per customer request - Please contact factory. 表面處理 Ensign系列起重機表面處理 所有起重機均標準配有靜電粉末塗層紅色表面。 還提供四種可選的表面處理,鍍鋅, 304或316不銹鋼,防腐蝕環氧樹脂。 可根據客戶要求提供訂制顏色 - 請聯繫工廠。 Powder Coat 粉末塗層 Standard N/C標準不加成本. Red electrostatic powder coating applied to all cranes – Good 紅色靜電粉末塗料適用於所有起重機 - 良好 Galvanized鍍鋅 Optional/Extra選用/額外 An economical choice that provides extra protection – Better 提供額外保護的經濟選擇 - 更好 304 Stainless Steel 304不銹鋼 Optional/Extra選用/額外 Electro-polished for added protection – Best 電拋光可提供額外保護 - 最佳 316 Stainless Steel 316不銹鋼 Optional/Extra選用/額外 A higher level of corrosion protection – Premium 更高水平的防腐蝕 - 高級 Epoxy (Gray) 環氧(灰色) Optional/Extra選用/額外 3-part epoxy is impact, fire, water, and slip-resistant - Premium 3部分環氧樹脂具有抗衝擊,防火,防水和防滑功能-高級 WINCHES For Ensign Series 捲揚機,適合Ensign系列 Hand Winches 手動捲揚機 M4022PB-K (5PA5) Spur gear hand winch with brake (5PA5)含刹車的正齒輪手動捲揚機 Zinc Plated 17 lbs 7.7 kg 鍍鋅 17磅7.7公斤 M4312PB-K (5PA10) Spur gear hand winch with brake M4312PB-K (5PA10)含刹車的正齒輪手動捲揚機 4WM2V-K Worm gear hand winch with brake 4WM2V-K 蝸輪齒輪手動捲揚機含刹車 Red Enamel紅琺瑯 42 lbs 19.1 kg 4WM2VEGRA-K 42磅19.1公斤 4WM2VEGRA-K Worm gear hand winch with brake Epoxy Paint (Gray) 42 lbs 19.1 kg M4042PBSS-K 42磅19.1千克 4WM2VEGRA-K 蝸桿齒輪手動捲揚機含剎車 環氧漆(灰色) 42磅19.1公斤 M4042PBSS-K (5PA5) Stainless steel spur gear hand winch with brake Stainless Steel 24 lbs 10.9 kg M4042PBSS-K (5PA5)不銹鋼正齒輪手動捲揚機含剎車 不銹鋼 24磅10.9公斤 M4312PBSS-K (5PA10) Stainless steel spur gear hand winch with brake (5PA10)不銹鋼正齒輪手動捲揚機含剎車 All hand winches include disc brake for load control and steel gear covers to protect gears and help prevent injuries. 所有手動捲揚機都包括用於負載控制的蝶式剎車和鋼製齒輪蓋,以保護齒輪並有助於防止受傷。 NOTE: Worm gear requires more turns with less effort than a spur gear winch. 注意:蝸桿齒輪與正齒輪捲揚機相比,需要更多的轉動而且耗費更少。 Electric Winches 電動捲揚機 Enamel Paint 搪瓷 油漆 Enamel Paint 搪瓷 油漆 115 Volt, AC, Single Phase 115伏,交流電 單相 All electric winches mount on boom via quick mount bracket and are equipped with internal break for load control. 所有電動捲揚機藉由快速安裝支架安裝在吊桿上,並配有內部斷路器,用於負載控制。 These products are not for lifting people, or things over people. 這些產品不可吊舉人員,也不可吊物在人員頭上 P5 BASES AND WIRE ROPE 底座和鋼索 BASES (sold separately) 底座另售 SERIES For Ensign Series 系列 適合於Ensign系列 Select the appropriate base(s) for your application from the chart below. Matching your crane with multiple 從下面的圖表中為您的應用選擇合適的底座。 您的起重機與多個底座匹配 bases provides optimal worksite flexibility and an economical solution for servicing multiple lift stations. 提供最佳的工地靈活性和經濟的解決方案,為多個吊升站提供服務。 Pedestal 底座 Flush 嵌平 Wall Mount 壁掛式安裝 Powder Coat Paint 粉末塗料 Galvanized 鍍鋅 304 Stainless Steel 304不銹鋼 316 Stainless Steel 316不銹鋼 Epoxy Paint 環氧漆 Approximate Ship Weight 近似 船運重量 WIRE ROPE Assembly (sold separately) For Ensign Series WIRE ROPE組裝(另售) 適合Ensign系列 Wire Rope Length 鋼索長度 Galvanized Aircraft Cable 鍍鋅飛行電纜 304 Stainless Steel Rope 304不銹鋼繩 316 Stainless Steel Rope 316不銹鋼繩 This winches and cranes are sold without wire rope. However, we carry top quality wire rope assemblies optimally designed for use with our winches and cranes. The assemblies above are equipped with a swaged ball fitting and swivel hook (Enamel w/Galvanized rope or Stainless Steel with SS rope) 本捲揚機和起重機不帶鋼絲繩出售。 但是,我們提供最優質的鋼絲繩組件,設計用於我們的捲揚機和起重機。 上面的組件配有一個型鍛球配件和旋轉鉤(搪瓷帶鍍鋅繩或不銹鋼鋼絲繩) *Based on 3.5:1 design factor NOTE: 1/8” wire rope is available with a reduced load rating. Please contact the factory. *基於3.5:1的設計因素 , 注:1/8“鋼絲繩可提供減少的額定負載。 請聯繫工廠。 These products are not for lifting people, or things over people. 這些產品不可吊舉人員,也不可吊物在人員頭上 P6 PERFORMANCE 性能 Ensign 500 Lift Below Floor 2 Level升到地板以下 Ensign 500 Lift Below 1 Floor 提升地板以下 Wire Rope Diameter 鋼絲繩 直徑 Wire Rope Length 3 鋼絲繩 長度3 Winch Configurations 捲揚機配置 Minimum 最低限度 For long lifts (Up to 240’ (73.1m)) please contact factory 對於長的吊高(最大240'(73.1m)),請聯繫工廠 lift below floor level 吊升地板以下 1.Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 1.升降到地面以下根據旋臂位置和底座配置而有所不同。 如需更長的吊升揚高,請聯繫工廠。 2.Performance Characteristics are for standard products referred to in this manual. Non-standard products may vary from the original design. Contact us for this information. 2.性能特徵適用於本手冊中提到的標準產品。 非標產品可能與原始設計不同 ,有關此信息,請與本公司聯繫。 3.Wire rope assemblies include a hood and a swaged ball fitting to work with quick disconnect anchor on winches, cable spooler and wire rope keeper. 316SS wire rope is also available. Please contact the factory. 3.鋼絲繩組件包括一個.覆蓋和一個型鍛球配件,可與捲揚機上的快速斷開錨,鋼纜線軸和鋼索保持器j 也可提供316不銹鋼鋼絲繩。 請聯繫工廠。 IMPORTANT: 重要: It is the owner or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it. 所有者或操作員有責任確定設備是否適合其預期用途。 研究所有適用的代碼,手冊和法規。 在操作之前,請務必閱讀隨設備提供的用戶手冊。 These products are not for lifting people, or things over people. 這些產品不可吊舉人員,也不可吊物在人員頭上 P7 PERFORMANCE 性能 Ensign 500 on Pedestal Base Performance Ratings2 Ensign 500裝在底座上裝上 性能額定 Boom Position 吊桿的位置 Load Rating 額定負載 Hook Reach Hook Height 鉤高度 1.Lift below floor level varies depending on boom position and base configuration. For longer lifts,please contact factory. 吊舉低於地面高度的變化取決於吊桿位置和底座配置。如需更長的吊升,請聯繫工廠。 2.Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact us for this information. 2.性能特徵適用於標準產品。 非標產品可能有所不同於 原始設計。 有關此信息,請與我們聯繫。 Pedestal Base 5BP5 5BP5底座 Flush/Wall Mount Performance Ratings2 嵌平/壁掛式安裝性能等級2 Boom Position 吊桿的位置 Load Rating 額定負載 Hook Reach Hook Height 鉤高度 1.Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 吊舉低於地面高度的變化取決於吊桿位置和底座配置。 如需更長的吊升,請聯繫工廠。 2.Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact us. for this information. 性能特徵適用於標準產品。 非標產品可能有所不同於 原始設計。 有關此信息,請與我們聯繫。 Wall-Mount Base 5BW5 壁掛式底座5BW5 Flush-Mount Base 5BF5 嵌入式底座5BF5 These products are not for lifting people, or things over people. 這些產品不可吊舉人員,也不可吊物在人員頭上 P8 PERFORMANCE 性能 Ensign 1000 Lift Below Floor 2 Level 吊升到地板以下 Lift Below 1 Floor 吊升到地板以下 Wire Rope Diameteter 鋼絲繩 直徑 Wire Rope Length 3 鋼絲繩 長度3 Winch Configurations 捲揚機配置 For long lifts (Up to 240’ (73.1m)) please contact factory 對於長的吊高(最大240'(73.1m)),請聯繫工廠 lift below floor level 吊升地板以下 1.Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 升降到地面以下根據旋臂位置和底座配置而有所不同。 如需更長的吊升揚高,請聯繫工廠 2.Performance Characteristics are for standard products referred to in this manual. Non-standard products may vary from the original design. Contact us. for this information. 2.性能特徵適用於標準產品。 非標產品可能有所不同於 原始設計。 有關此信息,請與我們聯繫。 3.Wire rope assemblies include a hood and a swaged ball fitting to work with quick disconnect anchor on winches, cable spooler and wire rope keeper. 316SS wire rope is also available. Please contact the factory. 3.鋼絲繩組件包括一個.覆蓋和一個型鍛球配件,可與捲揚機上的快速斷開錨,鋼纜線軸和鋼索保持器j 也可提供316不銹鋼鋼絲繩。 請聯繫工廠。 。 IMPORTANT: 重要: It is the owner or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it. 所有者或操作員有責任確定設備是否適合其預期用途。 研究所有適用的代碼,手冊和法規。 在操作之前,請務必閱讀隨設備提供的用戶手冊。 These products are not for lifting people, or things over people. 這些產品不可吊舉人員,也不可吊物在人員頭上 P9 PERFORMANCE 性能 Ensign 1000 on Pedestal Base Performance Ratings2 Ensign1000裝在底座上裝上 性能額 Boom Position 吊桿的位置 Load Rating 額定負載 Hook Reach Hook Height 鉤高度 1.Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 1.升降到地面以下根據旋臂位置和底座配置而有所不同。 如需更長的吊升揚高,請聯繫工廠 2.Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact us for this information. 2.性能特徵適用於標準產品。 非標產品可能有所不同於 原始設計。 有關此信息,請與我們聯繫。 Pedestal Base 5BP10 5BP10底座 Flush/Wall Mount Performance Ratings2 嵌平/壁掛式安裝性能等級 1.Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 升降到地面以下根據旋臂位置和底座配置而有所不同。 如需更長的吊升揚高,請聯繫工廠2.Performance Characteristics are for standard products. Non-standard products may vary from the original design. us for this information. 性能特徵適用於標準產品。 非標產品可能有所不同於 原始設計。 有關此信息,請與我們聯繫。 Wall-Mount Base 5BW10 5BW10壁掛式底座 P10 ACCESSORIES 配件 ACCESSORIES FOR ENSIGN SERIES ENSIGN系列配件 ITEM 項目 Part Number 零件號 Description 描述 Roller/Ball Bearing Comes Standard on 5PA10 (Not available on 5PA5) 滾桿/滾珠軸承 在5PA10為標準 (5PA5不 可得到) Red electrostatic powder coat paint finish - Good 304 Stainless steel electro-polished finish for added protection - Better 316 Stainless steel electro-polished finish for a higher level of protection - Best 304 Stainless steel - For use with stainless steel base only 316 Stainless steel - For use with stainless steel base only 3-part epoxy paint (gray) finish for higher level of protection - Premium 紅色靜電粉末塗料漆面 - 很好 304不銹鋼電拋光表面,增強保護性 - 更好 316不銹鋼電拋光表面,提供更高級別的保護 - 最佳 304不銹鋼 - 僅適用於不銹鋼底座 316不銹鋼 - 僅適用於不銹鋼底座 3部分環氧樹脂漆(灰色)表面處理,提供更高級別的保護 - 優質 5PA5 Series Rotational Lock 5PA5 系列 旋轉 鎖住 Optional 5PA5 rotation lock holds crane position at 30° increments For pedestal and wall mount bases - 304 Stainless Steel For pedestal and wall mount bases - 316 Stainless Steel For flush mount base - 304 Stainless Steel For flush mount base - 316 Stainless Steel 可選用的5PA5旋轉鎖可以30°的增量固定起重機位置 用於底座和壁掛式底座 - 304不銹鋼 用於底座和壁掛式底座 - 316不銹鋼 用於嵌入式安裝底座 - 304不銹鋼 用於嵌入式安裝底座 - 316不銹鋼 Base Anchor Kit 底座錨 套件 4 Hilti® Zinc Plated Steel fasteners 1/2 X 5.50 STL KB-TZ 4 Hilti® 304 Stainless Steel fasteners 1/2 X 5.50 SST304 KB-TZ 4 Hilti® 316 Stainless Steel fasteners 1/2 X 5.50 SST316 KB-TZ 4Hilti®鍍鋅鋼緊固件1/2 X 5.50 STL KB-TZ 4Hilti®304不銹鋼緊固件1/2 X 5.50 SST304 KB-TZ 4Hilti®316不銹鋼緊固件1/2 X 5.50 SST316 KB-TZ 4 Hilti® Zinc Plated Steel fasteners 5/8 X 6.00 STL KB-TZ 4 Hilti® 304 Stainless Steel fasteners 5/8 X 6.00 SST304 KB-TZ 4 Hilti® 316 Stainless Steel fasteners 5/8 X 6.00 SST316 KB-TZ 4Hilti®鍍鋅鋼緊固件5/8 X 6.00 STL KB-TZ 4Hilti®304不銹鋼緊固件5/8 X 6.00 SST304 KB-TZ 4Hilti®316不銹鋼緊固件5/8 X 6.00 SST316 KB-TZ Drill-Drive KitS 電鑽驅動器 套件 120 VAC, 11.5 amp, 300rpm drill-motor to power drive the hand winch. Only available for cranes configured with the M2 winch option. Includes 1-1/8” hex drive socket. 120 VAC,11.5安培,300rpm電鑽馬達,用於動力驅動手動捲揚機。 僅限用於配置M2捲揚機選件的起重機。 包括1-1 / 8“六角驅動套頭。 CORDLESS KIT: 60 V Brushless Motor, 300rpm drill-motor to power drive the M2 hand winch option. Includes 1-1/8” hex drive socket. 無線套件:60 V無刷馬達,300rpm鑽頭馬達 給動力驅動M2捲揚機選項。 包括1-1 / 8“六角驅動套頭。 Cable Spooler 鋼纜捲筒. 316 stainless steel reel winds up wire rope when detached from crane. 當從起重機上拆下時,316不銹鋼捲軸纏繞鋼絲繩。 Headache Ball 頭頂 球 Red Painted 10lb fits 3/16” to 1/4” Rope Red Painted 10lb fits 1/4” to 3/8” Rope 紅色油漆 10lb適合3/16“到1/4”繩索 紅色油漆10lb適合1/4“到3/8”繩索 Stainless Steel 10lb fits 3/16” to 1/4” Rope Stainless Steel 10lb fits 1/4” to 3/8” Rope 不銹鋼10磅適合3/16“到1/4”繩索 不銹鋼10磅適合1/4“至3/8”繩索 Wire Rope Keeper 鋼絲繩保持器 Stainless steel bracket attaches to base or other structure to hold free end of the wire rope when detached from the crane. 不銹鋼支架連接到底座或其他結構,以固定鋼絲繩的自由端 從起重機上拆下的繩子。 IMPORTANT: 重要: It is the owner or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it. 所有者或操作員有責任確定設備是否適合其預期用途。 研究所有適用的代碼,手冊和法規。 在操作之前,請務必閱讀隨設備提供的用戶手冊。 These products are not for lifting people, or things over people. 這些產品不可吊舉人員,也不可吊物在人員頭上 P11 OPTIONS選項 ADDITIONAL OPTIONS FOR ENSIGN SERIES ENSIGN系列的附加選項 WE offers a variety of additional options you can choose to enhance your davit crane. 我們提供了多種附加選項,您可以選擇這些選項來增強您的吊桿起重機。 FACTORY LOAD TEST Upon request, WE can test your crane prior to shipping, up to 125% of rated load. 工廠負荷試驗 根據要求,我們可以在裝運前測試您的起重機,最高可達額定負載的125%。 EXTENDED 5-YEAR WARRANTY Extend our standard 2-year warranty to 5 years . 延長5年保修期 將我們的標準2年保修期延長至5年。 PE Stamp - PROFESSIONAL ENGINEER STAMP Available upon request at time of order. PE 印章 - 專業工程師印章 可在訂購時根據要求提供。 CE MARK Available upon request at time of order, CE mark for products sold into the European union. CE 記號 訂購時可根據要求提供所售產品的CE標誌 進入歐洲聯盟。 ATEX CLASSIFICATION Specially rated for use in explosive settings. Available upon request at time of order. ATEX分類 訂購時可根據要求特別適用於爆炸性環境。 POWER WINCH operation AC electric in any voltage. DC electric, hydrualic and pneumatic power winches available. 電動捲揚機操作 任何電壓的交流電。 可提供直流電動,液壓和氣動動力捲揚機。 custom electric controls We can build the high quality controls you need to operate your equipment. 訂製電動控制裝置 我們可以構建操作設備所需的高質量控制。 DRILL-DRIVEABLE WINCH A worm gear hand winch is also available for operation with a 400 rpm max drill motor option. 電鑽驅動捲揚機。 蝸桿歯輪手動捲揚機也可用於最大400 rpm鑽孔馬達選件。 LIMIT SWITCH Add an emergency safety shut-off to ensure safe operation. 限位開關 添加緊急安全關閉裝置以確保安全操作。 CUSTOMIZATION 客製化 Customization is available for almost all OUR products and should always be performed by our engineers to assure the changes meet our stringent quality standards. Below are some of our more common customization requests. Only factory modifications are covered under warranty. 幾乎所有我們的產品都可以進行定制,我們的工程師應始終對其進行定制,以確保產品的安全 對於改變要符合我們嚴格的質量標準。 以下是我們的一些內容 常見的客製化請求。 只有工廠修改可包括保修範圍。 .LONGER LIFT DISTANCES Customized winch and crane configurations to accommodate longer lifts. 。更長的吊升距離 定制捲揚機和起重機配置,以適應更長的吊升距離。 .CUSTOM COLORS & FINISHES 定制顏色和表面處理 Custom colors and finishes are available to match your unique application 可根據您的獨特應用定制顏色和表面處理 .EXTENDED BOOM AND MASTS 延長吊桿和主柱 We can extend mast heights and boom lengths to fit your needs 。我們可以延長桅杆高度和吊桿長度,以滿足您的需求 .RELOCATE THE WINCH The winch can be relocated to fit confined spaces or height restrictions 重新安置捲揚機 捲揚機可以重新安置,以適應狹窄的空間或高度限制 .SPECIAL BASES Custom bases or mounting requirements can be manufactured to meet your unique situation 。特殊底座 可以製造定製基座或安裝要求以滿足您的獨特情況 Special davit crane built to lift UV panels at water treatment facilities 特製吊桿起重機 吊起在水處理設施 的UV板 These products are not for lifting people, or things over people. 這些產品不可吊舉人員,也不可吊物在人員頭上7-3.走行龍門型吊架 Travelling gantry crane
7.各種懸臂吊車及應用 Various JIB Crane and application 下載down load 7-1.立柱式旋臂吊車 Column-mounted jib cranes 7-2. 立柱式和支架式懸臂吊車 Column-mounted and bracket-mounted jib cranes 7-3.走行龍門型吊架 Travelling gantry crane7-2. 立柱式和支架式懸臂吊車 Column-mounted and bracket-mounted jib cranes
7.各種懸臂吊車及應用 Various JIB Crane and application 下載down load 7-1.立柱式旋臂吊車 Column-mounted jib cranes 7-2. 立柱式和支架式懸臂吊車 Column-mounted and bracket-mounted jib cranes 7-3.走行龍門型吊架 Travelling gantry crane7-1.立柱式旋臂吊車 Column-mounted jib cranes
7.各種懸臂吊車及應用 Various JIB Crane and application 下載down load 7-1.立柱式旋臂吊車 Column-mounted jib cranes 7-2. 立柱式和支架式懸臂吊車 Column-mounted and bracket-mounted jib cranes 7-3.走行龍門型吊架 Travelling gantry crane CTTB型 Column-mounted jib cranes with tie-rods girder arm with movable base plate 立柱式旋臂吊車附拉桿槽型樑吊桿在可移動底板上CTTB型 COMPONENTS: 組件: . Octagonal column in pressed sheet steel. 。 壓製鋼板的八角柱。 . Tie-rods girder arm, HEA or HEB profile, rotating on ball bearings. 。 拉桿樑吊桿,HEA或HEB型鋼,在滾珠軸承上旋轉。 . Base plate equipped with sheet metal box and concrete, movable with lifting up trolley. 。 底板配有鈑金箱和混凝土,可隨吊升小車移動。 . Adjustable brake lining. 。 可調整剎車來今片。 . Hoist power supply flat cable. 。主機电源供應的扁電纜 . Plastic cable-holder trolleys. 。 塑料電纜架小車。 . ON-OFF switch on the column. 。 立柱上的ON-OFF開關。 . Powder coating. 。 粉末烤漆。 CTSFM - MTSFM CTSFE - MTSFE型 Column-mounted and bracket-mounted jib cranes with cantilever arm and manual or electric extension 立柱式和支架式懸臂吊車,附有工字樑懸臂,手動或電動伸縮 COMPONENTS: 組件: . Octagonal column in pressed sheet steel (version with the column). 。壓製鋼板的八角柱。(立柱型版本)。 . Cantilever arm, IPE profile, rotating on ball bearings, with manual or electric extension. 。 懸臂,IPE型鋼,在滾珠軸承上旋轉,有手動或電動伸縮。 . Adjustable brake lining. 。可調整剎車來今片。 . Hoist power supply flat cable. 。主機电源供應的扁電纜 . Plastic cable-holder trolleys. 。塑料電纜架小車。 . ON-OFF switch on the column (version with the column). 。立柱上的ON-OFF開關。(立柱型版本)。 . Powder coating. 。粉末烤漆。 。 CTTSFM - MTTSFM CTTSFE - MTTSFE型 Column-mounted and bracket-mounted jib cranes with arm and manual or electric extension 立柱式和支架式懸臂吊車,附有懸臂,手動或電動伸縮 COMPONENTS: 組件: . Octagonal column in pressed sheet steel (version with the column). 。壓製鋼板的八角柱。(立柱型版本)。 . Tie-rods girder arm, HEA or HEB profile, rotating on ball bearings with manual or electric extension. 。拉桿樑吊桿,HEA或HEB型鋼,在滾珠軸承上旋轉有手動或電動伸縮。 。 . Adjustable brake lining. 。可調整剎車來今片。 . Hoist power supply flat cable. 。主機电源供應的扁電纜。 . Plastic cable-holder trolleys. 。塑料電纜架小車。 . ON-OFF switch on the column (version with the column). 。立柱上的ON-OFF開關。(立柱型版本)。 . Powder coating. 。粉末烤漆 RMC型 Column-mounted jib cranes with cantilever arm 360° 立柱式懸臂吊車,工字樑懸臂可作360°旋轉 COMPONENTS: 組件: . Octagonal column and flanged section fitting in pressed sheet steel. 。 八角柱和法蘭部分用壓製鋼板製成。 . Rotating cantilever arm, IPE profile, on ball bearings and contrast wheels 。旋轉懸臂,IPE型鋼,在滾珠軸承和對比輪上旋轉, . Line multipolar manifold with rotating head. 。附有旋轉頭的多極歧管線。 . Hoist power supply flat cable. 。主機电源供應的扁電纜 . Plastic cable-holder trolleys. 。塑料電纜架小車 . ON-OFF switch on the column. 。立柱上的ON-OFF開關。 . Powder coating. 。粉末烤漆 RMC PRE型 Column-mounted jib cranes with cantilever arm 360° and with predisposition for electric rotation 立柱式懸臂吊車,附有工字樑懸臂360°和電動旋轉 COMPONENTS: 組件: . Octagonal or circular column in pressed sheet steel. 。壓製鋼板的八角柱或圓柱形。 . Rotating cantilever arm, IPE or boxed profile, on base bearings with continuous manual rotation 360°. 。旋轉懸臂,IPE型鋼或盒形輪廓,在基礎軸承上可連續手動360°旋轉。 . Line multipolar manifold with rotating head. 。 多極歧管線附有旋轉頭。 . Predisposition for electric rotation. 。 電動旋轉的。 . Hoist power supply flat cable. 。主機电源供應的扁電纜。 . Plastic cable-holder trolleys. 。塑料電纜架小車 . ON-OFF switch on the column. 。立柱上的ON-OFF開關。 . Powder coating. 。粉末烤漆 RELCT RELMT型 Column-mounted and bracket-mounted jib cranes with cantilever arm and limited electric rotation 立柱式和支架式懸臂吊車,附有工字樑懸臂和有限度的電動旋轉 COMPONENTS: 組件: . Octagonal column in pressed sheet steel (version with the column). 。壓製鋼板的八角柱。(立柱型版本)。 . Cantilever arm, IPE profile, rotating on ball bearings and limited electric rotation. 。懸臂,IPE型鋼,在滾珠軸承上旋轉和有限度的電動旋轉 . Motor-reducer applied to bottom surface of bottom bracket. 。馬達減速器應用於底面支架的表面。 . Electric panel according to the CEI norm with “inverter” for the modulation of the rotation speed. 。 根據CEI標準, 電氣面板附有“變頻器”,用於調整轉速。 . Electric limits to bound the rotating field. 。 電氣限制用來限制旋轉範圍。 . Power hoist and motor-reducer connection cables. 。 動力主機和減速機連接電纜。 . Plastic cable-holder trolleys. 。塑料電纜架小車 . Powder coating. 。粉末烤漆 。 RELCTT RELMTT型 Column-mounted and bracket-mounted jib cranes with tie-roods girder arm and limited electric rotation 立柱式和支架式懸臂吊車,附有拉桿工字樑懸臂和有限度的電動旋轉 COMPONENTS: 組件: . Octagonal column in pressed sheet steel (version with the column). 。壓製鋼板的八角柱。(立柱型版本)。 . Tie-rods girder arm, HEA or HEB profile, rotating on ball bearings and limited electric rotation. 。拉桿樑吊桿,HEA或HEB型鋼,在滾珠軸承上旋轉和有限的電動旋轉。 。 . Motor-reducer applied to bottom surface of bottom brachet. 。馬達減速機應用於底面支架的表面。 . Electric panel according to the CEI norm with “inverter” for the modulation of the rotation speed. 。根據CEI標準, 電氣面板附有“變頻器”,用於調整轉速。。 . Electric limits to bound the rotating field. 。電氣限制用來限制旋轉範圍。。 . Power hoist and motor-reducer connection cables. 。動力主機和減速機連接電纜 . Plastic cable-holder trolleys. 。塑料電纜架小車 . Powder coating 。粉末烤漆 REC型 Column-mounted jib cranes with cantilever arm and continuous electric rotation 360° 立柱式懸臂吊車,附有工字樑懸臂可作360°連續電動旋轉 COMPONENTS: 組件: . Octagonal or circular column in pressed sheet steel. 。 八角形柱或圓形柱用壓製鋼板作成的。 . Rotating cantilever arm, IPE or boxed profile, on base bearings with continous electric rotation 360°. 。旋轉懸臂,IPE型鋼或盒形輪廓,在滾珠軸承上可360°連續的電動旋轉 . Motor-reducer and line multipolar manifold with rotating head. 。 馬達減速機和線路多極歧管附旋轉頭。 . Electric panel according to the CEI norm with “inverter” for the modu- lation of the rotation speed. 。根據CEI標準, 電氣面板附有“變頻器”,用於調整轉速。 . Power hoist and motor-reducer connection cables. 。動力主機和減速機連接電纜 . Plastic cable-holder trolleys. 。塑料電纜架小車 . Powder coating. 。粉末烤漆 PM型 Travelling gantry crane 走行龍門型吊架 COMPONENTS: 組件: . Hoist travelling girder, double T profile, bolted on the piers. 。主機走行樑,雙T型鋼,用螺栓固定在橋墩上。 . Piers composed by square pipes, with upper arms stiffening. 。 由方管組成的橋墩,上臂加固。 . Pirouette wheels bolted placed under piers. 。 旋轉輪子用螺栓固定在橋墩下。 . Plastic cable-holder trolleys. 。塑料電纜架小車 . Hoist power supply flat cable. 。主機电源供應的扁電纜。 . Powder coating. 。粉末烤漆 。 PMS型 Travelling dismountable gantry crane 走行可拆卸龍門型吊架 COMPONENTS: 組件: . Hoist travelling girder, double T profile, bolted on the piers. 。主機走行樑,雙T型鋼,用螺栓固定在橋墩上 . Piers composed by telescopic square pipes. 。由伸縮方管組成的橋墩。 . Pirouette wheels bolted placed under piers. 。旋轉輪子用螺栓固定在橋墩下。 . Plastic cable-holder trolleys. 。塑料電纜架小車 . Hoist power supply flat cable. 。主機电源供應的扁電纜。 . Powder coating. 。粉末烤漆 。 PSMPAV型 Travelling dismountable gantry crane for flooring specialists 走行可拆卸龍門型吊架適用於鋪地板專家的 COMPONENTS: 組件: . Hoist travelling girder, double T profile, bolted on the piers. 。主機走行樑,雙T型鋼,用螺栓固定在橋墩上 . Perpendicular beam to the sliding trolley hoist. 。 垂直樑給滑動小車主機。 . Piers composed by square pipes. 。 由方管組成的橋墩。 * pirouette wheels bolted placed under piers. *旋轉輪子螺栓固定在橋墩下面。 . Plastic cable-holder trolleys. 。塑料電纜架小車 . Hoist power supply flat cable. 。主機电源供應的扁電纜。 . Powder coating. 。粉末烤漆 。 BTGF - BTGR型 Lifting beam with HEA beam and with fixed or adjustable hooks HEA樑的吊樑和固定或可調整的鉤子 COMPONENTS: 組件: . Girder HEA profile. . Top ejebolt for the crane hook housing, without load bearing welds. 。 起重機吊鉤外殼的頂部電子螺栓,無承重焊接。 . Lowers ejebolts fixed or adjustable, for the connection of loads. 。 降低固定或可調節的ejebolts,用於連接負載。 . Powder coating 。粉末烤漆6-14.保證 WARRANTY
6.旋臂吊車附有手動和電動旋轉 Jib Cranes With Manual And Electric Rotation 下載down load 6-1.吊升系統 Lifting systems 6-2.立柱型旋臂吊車附拉桿槽型樑吊桿CCT型 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM CCT 6-3.立柱式旋臂吊車附工字樑伸臂吊桿 CT型 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM CT 6-4.立柱式旋臂吊車附拉桿工字樑伸臂吊桿 CTT型 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM CTT 6-5.立柱式旋臂吊車附有關節的的吊桿CTS型 COLUMN-MOUNTED JIB CRANE WITH ARTICULATED BOOM CTS 6-6.旋臂吊車附拉桿槽型樑吊桿在可移動底板上CCTB型 JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM ON MOVABLE BASE PLATE CCTB 6-7.旋臂吊車附附工字樑伸臂吊桿,手動 ,全部和連續360°旋轉RMC 型 JIB CRANE WITH CANTILEVER BOOM WITH MANUAL, TOTAL AND CONTINOUS 360° ROTATION RMC 6-8.立柱式旋臂吊車附工字樑伸臂吊桿及有限制電動旋轉 RELCT 型 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM AND LIMITED ELECTRIC ROTATION RELCT 6-9.獨立支柱旋臂吊車附附工字樑伸臂吊桿,全部和連續360°電動旋轉 REC型 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM WITH TOTAL AND CONTINOUS 360° ELECTRIC ROTATION REC 6-10.立柱式旋臂吊車附拉桿工字樑伸臂吊桿及有限制電動旋轉 RELCTT 型 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM AND LIMITED ELECTRIC ROTATION RELCTT 6-11.可移動式門型起重機在轉向輪上PM型 MOVABLE GANTRY CRANE ON STEERING WHEELS PM 6-12.旋臂吊車主要特性描述 DESCRIPTION OF JIB CRANE MAIN FEATURES 6-13.安裝人員和買方的責任和義務 RESPONSABILITIES AND DUTIES OF THE INSTALLER AND BUYER 6-14.保證 WARRANTY JIB CRANES WITH MANUAL AND ELECTRIC ROTATION 旋臂吊車附有手動和電動旋轉 Lifting systems 吊升系統 P1 JIB CRANES 旋臂吊車 JIB CRANES WITH MANUAL ROTATION... 手動旋轉的旋臂吊車.... … WITH TIE-ROD CHANNEL GIRDER BOOM CCT-MCT 附拉桿槽型樑吊桿CCT-MCT型 … WITH CANTILEVER BOOM CT-MT 附伸臂吊桿CT-MT型 … WITH TIE-ROD GIRDER BOOM CTT-MTT 附拉桿工字樑吊桿CTT-MTT型 … WITH ARTICULATED BOOM CTS-MTS 附有關節的的吊桿 CTS-MTS型 … WITH TIE-ROD CHANNEL GIRDER BOOM ON BASE PLATE CCTB 附拉桿槽型樑吊桿在底板上CCTB型 … WITH 360° CANTILEVER BOOM RMC 附360°旋轉伸臂吊桿RMC型 JIB CRANES WITH ELECTRIC ROTATION 電動旋轉的的旋臂吊車.... … WITH CANTILEVER BOOM AND LIMITED E.R. RELCT-RELMT 附旋轉伸臂吊桿和有限度的電動旋轉.RELCT-RELMT型 … WITH TIE-ROD GIRDER BOOM AND LIMITED E.R. RELCTT-RELMTT 附拉桿工字樑吊桿和有限度的電動旋轉RELCTT-RELMTT型 … WITH 360° CANTILEVER BOOM AND CONTINUE E.R. REC 附360°旋轉伸臂吊桿和繼續使用電動旋轉. REC型 GANTRY CRANES … 龍門起重機 … MOVABLE ON STEERING WHEELS PM 在方向輪上可移動PM型 P2 DESCRIPTION OF JIB CRANE MAIN FEATURES 旋臂吊車主要特性描述 LEGISLATIVE AND NORMATIVE REFERENCES 立法和規範性參考文獻 The jib cranes are planned and built in respect of the following norms: 旋臂吊車的規劃和建造遵循以下規範: Directive 98/37/CE – Attachment II A 98/37 / CE 規則- 附件II A. Of the European Parliament and Council of June 22th 1998 1998年6月22日的歐洲議會和理事會 Concerning the approach of member states legislation about machines 會員國關於機器的立法的方法 Low Tension Directive (DBT) 73/23/CEE 低張力指令規則-(DBT)73/23 / CEE It appears in the Italian Legislative Organisation with the Law 791/77 它出現在意大利立法組織的第791/77號法律中 Modified with Legislative Decree 626/96 and 277/97 根據第626/96號和第277/97號法令修改 Electromagnetic Compatibility Directive (EMC) 89/336/CEE - 92/31/CEE 電磁兼容性指令(EMC)89/336 / CEE - 92/31 / CEE It appears in the Italian Legislative Organisation with Legislative Decree 476/92 它出現在意大利立法組織,第476/92號法令 Modified with Legislative Decree 615/96 根據第615/96號法令修改 Technical and national harmonized rules took into consideration: 考慮到技術和國家統一規則: - UNI EN 12100-1: 2005 Machine safety – Fundamental concepts, general planning concepts - UNI EN 12100-1:2005機器安全 - 基本概念,總體規劃概念 - Part 1: Terminology rules, methodology. - 第1部分:術語規則,方法。 - UNI EN 12100-2: 2005 Machine safety – Fundamental concepts, general planning concepts - UNI EN 12100-2:2005機器安全 - 基本概念,總體規劃概念 - Part 2: Technical Principles. - 第2部分:技術原則。 - UNI ISO 4301/88 Classification of lifting systems. - UNI ISO 4301/88吊升系統分類。 - UNI 7670/88 Calculation of lifting systems mechanisms. - UNI 7670/88吊升系統機構的計算。 - UNI EN 294: 1993 Machine safety – Safety distances to prevent to reach dangerous zones for the superior limbs. - UNI EN 294:1993機器安全 - 防止上肢達到危險區域的安全距離。 - UNI EN 349: 1994 Machine safety – Minimum spaces to prevent the crushing of some parts of the body. - UNI EN 349:1994機器安全 - 防止身體某些部位擠壓的最小空間。 - UNI EN 842: 1997 Machine safety – Danger visual signals – General requirements, planning and tests. - UNI EN 842:1997機器安全 - 危險視覺信號 - 一般要求,計劃和測試。 - CEI EN 60204-1: 1993 Machine safety – Electric equipments of machines - CEI EN 60204-1:1993機器安全 - 機器的電氣設備 - Part 1: general rules. - 第1部分:一般規則。 - FEM 9683/95 Selection of lifting and travelling engines. - FEM 9683/95起重和行走發動機的選擇。 - FEM 9941/95 Control symbology. - FEM 9941/95控制符號系統。 - FEM 9755/93 Safety Working Periods (S.W.P.). - FEM 9755/93安全工作期(S.W.P.)。 - CNR UNI 10011/85 Steel structures – calculation, realization, test and maintenance instructions. - CNR UNI 10011/85鋼結構 - 計算,實現,測試和維護說明。 - CNR UNI 10021/85 Steel structures for lifting machines. Calculation, realization, test and maintenance instructions. - CNR UNI 10021/85起重機械用鋼結構。 計算,實現,測試和維護說明。 - CNR UNI 10022/85 Cold produced structural shapes: instructions for their use in the constructions. - CNR UNI 10022/85冷作結構形狀:在結構中使用的說明。 ENCLOSED DOCUMENTATION 附屬文件 Jib cranes are supplied with the CE marking and CE conformity declaration. 旋臂起重機附有CE標誌和CE合格聲明。 CLASS OF SERVICE 服務類別 Structural crane components are established in the class of service ISO A4 - UNI ISO 4301/88. 結構起重機部件在ISO A4 - UNI ISO 4301/88服務等級中建立。 PAINTING 油漆 Structural crane components are painted with anti-rust and two coats of yellow enamel RAL 1007. On demand, structural crane components can be painted by sandblast or hot galvanization. STANDARD CONDITION OF USE Temperature: Tmin = -10°C Tmax = 40°C Envrironment: Protected against the atmospheric agents 結構起重機部件塗有防銹漆和兩層黃色琺瑯RAL 1007。根據需要,結構起重機部件可以噴砂或熱鍍鋅。 標準使用條件 溫度:Tmin = -10°C Tmax = 40°C環境:保護防止大氣介質 SUPPLYING TERMS 供應條款 Warranty: 24 months Prices: ex-works Packing: included 保固:24個月價格:出廠包裝:已包含 Hoist: not included. Available on request. 起重機:不包括在內。可以依要求辦到。 P3 RESPONSABILITIES AND DUTIES OF THE INSTALLER AND BUYER 安裝人員和買方的責任和義務 PREMINILARY OPERATIONS 初步運作 Before proceeding with the installation of any crane, it would be appropriate to carry out the following operations: 在進行任何起重機的安裝之前,進行以下操作是才適當的: a) check that working area of the crane is suitable for the chosen crane model , in particular that in its action does not interfere with other machines or constructions. a)檢查起重機的工作區域是否適合所選的起重機型號,特別是在其動作中不會干擾其他機器或結構。 b) check that electrical system is functioning and in particular: b)檢查電氣系統是否正常運行,特別是: 1) the line cable section must be measured to bear the absorption of the engines (lifting and/or dragging); 1)必須測量纜線部分足以承受發動機的吸收(吊升和/或拖曳); 2) the line must be protected by a magnetothermic earth full device switch; 2)線路必須用磁熱全接地設備開關保護; 3) the earthing system must be effective and functioning 3)接地系統必須有效且有功能 c) prearrange the necessary equipment for lifting of the charges to execute dynamic and static load test; c)預先安排吊升負荷所需的設備,以進行動態和靜態負載測試; d) place following charges at disposal for the load test: d)為了負載測試提供以下規定: 1) static test: nominal capacity x 1,25; 1)靜態試驗:標稱荷重x 1,25; 2) dynamic test: nominal capacity x 1,10; 2)動態試驗:標稱容量x 1,10; e) check crane installation works do not interfere with normal workshop activity (factory, yard, etc…) which can determine dangerous situations for the workers. In the case of interferences, isolate the working area and the ways out of the means of transport, y strip and signals concerning machines in motion. e)檢查起重機安裝工程是否干擾正常的車間活動(工廠,院子等......) 這可以確定工人的危險情況。 在干擾的情況下,隔離工作區域和運輸工具的出入口,黃色帶子和機器移動的信號 PRELIMINARY TESTS FOR THE INSTALLATION OF “BRACKET-MOUNTED JIB CRANE” CHECK BEARING STRUCTURES (pillars, manufactured articles, masonries, etc…)ARE SUITABLE TO BEAR HORIZONTAL AND VERTICAL CRANE STRESS. 安裝“支架安裝的旋臂起重機”檢查軸承結構(支撑,製造号,磚石等......)的初步測試適合承受水平和垂直起重應力。 IN PARTICULAR, CHECK THE DIMENSIONS OF THESE CRANES WOULD BE SUITABLE FOR TOOTH WITH BRACKETS AND TIE-RODS WHICH ARE FURNISHED WITH THE CRANE. 特別是,檢查這些起重機的尺寸是否適合用於帶有齒的支架和拉桿來完成本超重機。 PRELIMINARY TESTS FOR THE INSTALLATION OF “COLUMN-MOUNTED JIB CRANE” THE BUILDING FIRM ALWAYS SUGGESTS TO FIX “COLUMN-MOUNTED JIB CRANE” ON THE NEW PLINTH. 安裝“立柱式的旋臂起重機”的初步測試建造公司總是建議固定在新的平台上 “立柱式的旋臂起重機”。 As alternative, after the advice and taking on the full responsibility of skilled workers, the customer can choose a fixing on the flooring by means of chemical products and threaded bars. 作為替代方案,在建議並承擔技術工人的全部責任後,客戶可以選擇通過化學產品和螺紋桿固定地板。 STRESS FEATURES TO THE BASE OF THE COLUMN WHERE MEASURE THE PLINTH ARE FURNISHED ON DEMAND BY THE BUILDING FIRM. 在建築公司根據需求測量平台的柱子底部的應力特性。 THE MEASUREMENT OF THE PLINTH ITSELF SHALL BE MADE FROM TIME TO TIME BY THE CUSTOMER 客戶應不時對其平台自身進行測量 WHO WILL FOLLOW, OVER ITS OWN RESPONSIBILITY THE GROUND FEATURES AND ANY INTERACTION WITH EXISTING FOUNDATION STRUCTURES. 這些人將遵循超過其自身的責任,承擔接地特性以及與現有基礎結構的任何相互作用。 INSTALLATION OF JIB CRANES 安裝旋臂起重機 BEFORE PROCEEDING WITH THE INSTALLATION OF THE CRANE, CHECK THAT IS IN COMPLIANCE WITH BUILDER DEMANDS AND READ THE DIRECTIONS CAREFULLY WRITTEN IN THE INSTRUCTION MANUAL. 在安裝起重機之前,請檢查是否符合造商的要求,並仔細閱讀使用說明書中的規定。 INSTALLER DUTIES 安裝人員的責任 After having installed the cranes following directions carefully written in the “Instruction Manual”, the installer duties are: 按照“使用說明書”中的說明安裝起重機後,安裝人員的職責是: 1) put the crane in working doing test as indicated in this Manual; 1)按照本手冊的規定,將起重機置於工作狀態; 2) write “Use Pass Certificate” and in case of lack of this certificate supplied by the installer, it is possible to use and compile the certificate supplied by the building firm; 2)寫“使用通過證書”,如果安裝人員提供的證書不足,可以使用並編制建造公司提供的證書; 3) compile Control Register 3)編譯控制登記 P4 WARRANTY 保證 DUTIES 職責 In case of damage or failure the Company: 如果發生損壞或故障,公司: commit itself to repair or replace the product free of charge, if it has been used correctly and in accordance with the instructions of use written in the manual enclosed. 如果使用正確並且符合本手冊中的使用說明,則承諾免費維修或更換產品。 DUTY LENGTH 責任期間長度 This engagement is valid for a period of 24 months from the delivery and tested installation date, after acceptance of the respective document. 在接受相應文件後,此約定在交付和測試安裝日期後的24個月內有效。 However, the warranty is consequent to the notification by recorded-delivery letter, within 8 days from the discovery of any possible damage, upon check of the manufacturer. 但是,保修是在發現製造商檢查後,在發現任何可能的損壞後的8天內通過記錄交付信函通知的。 WARRANTY 保證 The warranty includes replacement and reparation of detective part (component, machine or any part of it) except disassembly, reassembly and transport expenses. 保修包括更換和修理檢測部件(部件,機器或其任何部分),但拆卸,重新組裝和運輸費用除外。 The replacement of detective part does not extend the warranty on the whole machine, except that is a complete replacement. 更換檢測部件不會延長整機的保修期,除非是完全更換。 In this way, the manufacturer is exempted from every compensation duty and the purchaser renounces to any request of charges or third party damages, due to the unuse of the machine. 通過這種方式,製造商免除了每項賠償責任,並且由於不使用機器,購買者放棄了任何收費或第三方損害賠償請求。 EXCLUSIONS 排除 From the warranty are excluded damaged parts by accident during the transport for carelessness or wrong connection to the power electric line (when these operations are made by the customer) as well as for the normal wear of the parts due to the environmental conditions. 在保修期內,由於交通疏忽或電力電線的錯誤連接(當客戶進行這些操作時)以及由於環境條件導致的部件的正常磨損,在運輸過程中意外排除損壞的部件。 Moreover, are excluded all failures produced by insufficient or wrong maintenance, inexperience and incorrect use, modification and reparation not authorized. 此外,排除因維護不足或錯誤,缺乏經驗和不正確使用,修改和修復未經授權而產生的所有故障。 WARRANTY VALIDITY 保證有效 The warranty validity is subject to the right execution of the maintenance works written in the instruction manual as well as the periodically maintenances planned in Control Register of the machine confirmed by the declarations of the operators appointed by the purchaser. Warranty declines when conditions of payment are not respected. For parts supplied by third party are valid the same warranties of builders. Competent authority for any dispute is the Court of Urbino city. 保修有效期取決於正確執行說明手冊中所述的維護工作,以及由購買者指定的操作員聲明確認的機器控制登記冊中計劃的定期維護。 如果不遵守付款條件,保修會拒絕。 對於由第三方提供的部件,對建造者的保修有效。 任何爭議的主管當局是烏爾比諾市法院。 P5 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM CCT 立柱型旋臂吊車附拉桿槽型樑吊桿CCT型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearings, adjustable brake, hoist-holder trolley, flat cable, plastic cable-holder, ON-OFF switch on the column, anti-rust and two coat of enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,可調整刹車,吊升支架小車,扁平電纜, 塑料電纜支架,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM MCT 支架安裝式旋臂吊車附拉桿槽型樑吊桿MCT型 Equipped with: 配備有: brackets in pressed sheet steel, rotating boom on ball bearings, adjustable brake, hoist-holder trolley, flat cable,plastic cable-holder, anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,可調整刹車,吊升支架小車,扁平電纜,塑料電纜支架,防銹和兩層琺瑯油漆。 COLUMN-MOUNTED JIB CRANE 立柱型旋臂吊車 MODEL 型號 CAPACITY 能力KG. 公斤 STRADDLE 臂長B mt. 米 HEIGHT 高度 TOTAL H 全高米 mt. UNDER JIB H1 臂下高H1 米 TROLLEY 小車 BRACKET-MOUNTED JIB CRANE 支架安裝式旋臂吊車 MODEL 型號 CRANE CLASS 起重機等級 Pillar width 支撑柱寬度 P6 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM CT 立柱式旋臂吊車附工字樑伸臂吊桿 CT型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearings, adjustable brake, flat cable, plastic cable-holder trolleys, ON-OFF switch on the column, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH CANTILEVER BOOM MT 支架安裝式旋臂吊車附工字樑伸臂吊桿 MT型 Equipped with: 配備有: brackets in pressed sheet steel, rotating boom on ball bearings, adjustable brake, flat cable, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,,防銹和兩層琺瑯油漆。 COLUMN-MOUNTED JIB CRANE 立柱式旋臂吊車 BRACKET-MOUNTED JIB CRANE 支架安裝式旋臂吊車 MODEL 型號 CAPACITY KG. 能力公斤。 STRADDLE B臂長B 米 HEIGHT 高度 TOTAL H 全高米 mt. UNDER JIB H1 臂下高H1 米 MODEL 型號 CRANE CLASS 起重機等級 Pillar width 支撑柱寬度 P7 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM CTT 立柱式旋臂吊車附拉桿工字樑伸臂吊桿 CTT型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearing, adjustable brake, flat cable, plastic cable-holder trolleys,ON-OFF switch on the column, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM MTT 支架安裝式旋臂吊車附拉桿工字樑伸臂吊桿 MTT型 Equipped with: 配備有: brackets in pressed sheet steel, rotating boom on ball bearings, adjustable brake, flat cable, plastic cable-holder trolleys,anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,,防銹和兩層琺瑯油漆。 COLUMN-MOUNTED JIB CRANE 立柱式旋臂吊車 BRACKET-MOUNTED JIB CRANE 支架安裝式旋臂吊車 MODEL 型號 CAPACITY KG. 能力公斤。 STRADDLE B臂長B 米 HEIGHT 高度 TOTAL H 全高米 mt. UNDER JIB H1 臂下高H1 米 MODEL 型號 Pillar width 支撑柱寬度 P8 COLUMN-MOUNTED JIB CRANE WITH ARTICULATED BOOM CTS 立柱式旋臂吊車附有關節的的吊桿CTS型 Equipped with: 配備有: column in pressed sheet steel, rotating articulated boom on ball bearings, double adjustable brake, flat cable, plastic cable-holder trolleys, fixed eye-bolt mounted on the top, ON-OFF switch on the column, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉關節的的吊桿上有滾珠軸承,雙可調整刹車,扁平電纜,塑料電纜支架小車,固定吊環螺栓裝在頂部,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 。 BRACKET-MOUNTED JIB CRANE WITH ARTICULATED BOOM MTS 支架安裝式旋臂吊車附有關節的的吊桿MTS型 Equipped with: 配備有: column in pressed sheet steel, rotating articulated boom on ball bearings, adjustable brake, flat cable, plastic cable-holder trolleys, fixed eye-bolt mounted on the top, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉關節的的吊桿上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,固定吊環螺栓裝在頂部,防銹和兩層琺瑯油漆。 P9 JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM ON MOVABLE BASE PLATE CCTB 旋臂吊車附拉桿槽型樑吊桿在可移動底板上CCTB型 Equipped with: 配備有: column in pressed sheet steel placed on a sheet steel base plate which must be filled up with the concrete (not included), lower holes for the lifting and travelling by the lifter trolley, must have rotating boom on bearings, adjustable brake, cable-holder trolley, flat cable, plastic cable-holder trolleys, ON-OFF switch on the column, anti-rust and and two coats enamel painting. 壓製鋼板上的鋼柱放在鋼板底板上,鋼板底板必須填滿混凝土(不包括在內)下部孔用於吊升並且可籍由升降機小車行駛,旋轉臂上有必須有軸承,可調整刹車, 電纜支架小車,扁平電纜 ,塑料電纜支架,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 P10 JIB CRANE WITH CANTILEVER BOOM WITH MANUAL, TOTAL AND CONTINOUS 360° ROTATION RMC 旋臂吊車附附工字樑伸臂吊桿,手動 ,全部和連續360°旋轉RMC 型 Equipped with: 配備有: column and flanged section fitting in pressed sheet steel, rotating boom on ball bearings, multipolar line manifold with rotating head, flat cable, plastic cable-holder trolleys, ON-OFF switch on the column, anti-rust and two coats enamel painting. 柱和法蘭部分由壓製鋼板作成,旋轉臂上有滾珠軸承,附旋轉頭的多極線歧管,扁平電纜,塑料電纜架小車,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆 JIB CRANE WITH TOTAL AND CONTINOUS 360° ROTATION JIB起重機具有360°和360°連續旋轉 旋臂吊車,全部和連續360°旋轉 P11 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM AND LIMITED ELECTRIC ROTATION RELCT 立柱式旋臂吊車附工字樑伸臂吊桿及有限制電動旋轉 RELCT 型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearings, motor-reducer, pinion, cogwheel, electric panel according to the CEI norm with “inverter” for the modulation of the rotation speed, flat cable and power and panel connection cables, plastic cable-holder trolleys, anti-rust and two coats enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,電動減速器,小齒輪,齒輪,電動面板, 按照CEI規範用“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH CANTILEVER BOOM AND LIMITED ELECTRIC ROTATION RELMT 支架安裝式旋臂吊車附工字樑吊桿及有限制電動旋轉RELMT型 Equipped with: 配備有 brackets in pressed sheet steel, rotating boom on ball bearings, moto-reducer, pinion, cogwheel, electric panel according to the CEI norm with “inverter” for the modulation of the rotation speed, flat cable, power and panel connection cables, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,電動減速機,小齒輪,齒輪,電動面板 ,按照CEI規範,“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆。 Pillar width 支柱寬度 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM AND LIMITED ELECTRIC ROTATION RELCTT 立柱式旋臂吊車附拉桿工字樑伸臂吊桿及有限制電動旋轉 RELCTT 型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearings, moto-reducer, pinion, cogwheel, electric panel according to flat cable, and power and panel connection cables, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,電動減速器,小齒輪,齒輪,電動面板 , 按照CEI規範用“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM AND LIMITED ELECTRIC ROTATION RELMTT 支架安裝式旋臂吊車附工字樑吊桿及有限制電動旋轉RELMTT型 Equipped with: 配備有: brackets in pressed sheet steel, rotating boom on ball bearings, moto-reducer, pinion, cogwheel, electric panel according to the CEI norm with “inverter” for the modulation of the rotation speed, flat cable, power and panel connection cables, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,電動減速機,小齒輪,齒輪,電動面板 按照CEI規範用“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆, Pillar width 支柱寬度 P13 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM WITH TOTAL AND CONTINOUS 360° ELECTRIC ROTATION REC 獨立支柱旋臂吊車附附工字樑伸臂吊桿,全部和連續360°電動旋轉 REC型 Equipped with: 配備有: column in pressed sheet steel, IPE or boxed boom, moto-reducer, base bearings, electric panel according to the CEI norm with “inverter” for the modulation cables, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板柱, IPE或箱式吊桿,,機動減速器,底座軸承,電動面板 根據CEI規範用“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆。 electric limits to bound the rotating field of the crane 限制起重機旋轉區域的電氣限制 push-button panel mounted on the channel metal sliding trolleys 按鈕面板安裝在槽型鋼金屬滑動小車上 JIB CRANE WITH TOTAL AND CONTINOUS 360° ELECTRIC ROTATION 旋臂吊車附附全部和連續360°電動旋轉 14 MOVABLE GANTRY CRANE ON STEERING WHEELS PM 可移動式門型起重機在轉向輪上PM型 Equipped with: 配備有: IPE beam bridge connected with bolts to the rod piers and lateral stiffing bridges in metal tubulars support bolted perforated plates on steering wheels anti-rust and two coats of enamel painting. IPE工字樑橋用螺栓連接到桿墩和用金屬管支撐的側向剛性橋 轉向輪上的螺栓穿孔板 ,防銹和兩層琺瑯油漆。 。 MOVABLE GANTRY CRANE ON STEERING WHEELS 可移動式門型起重機在轉向輪上6-13.安裝人員和買方的責任和義務 RESPONSABILITIES AND DUTIES OF THE INSTALLER AND BUYER
6.旋臂吊車附有手動和電動旋轉 Jib Cranes With Manual And Electric Rotation 下載down load 6-1.吊升系統 Lifting systems 6-2.立柱型旋臂吊車附拉桿槽型樑吊桿CCT型 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM CCT 6-3.立柱式旋臂吊車附工字樑伸臂吊桿 CT型 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM CT 6-4.立柱式旋臂吊車附拉桿工字樑伸臂吊桿 CTT型 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM CTT 6-5.立柱式旋臂吊車附有關節的的吊桿CTS型 COLUMN-MOUNTED JIB CRANE WITH ARTICULATED BOOM CTS 6-6.旋臂吊車附拉桿槽型樑吊桿在可移動底板上CCTB型 JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM ON MOVABLE BASE PLATE CCTB 6-7.旋臂吊車附附工字樑伸臂吊桿,手動 ,全部和連續360°旋轉RMC 型 JIB CRANE WITH CANTILEVER BOOM WITH MANUAL, TOTAL AND CONTINOUS 360° ROTATION RMC 6-8.立柱式旋臂吊車附工字樑伸臂吊桿及有限制電動旋轉 RELCT 型 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM AND LIMITED ELECTRIC ROTATION RELCT 6-9.獨立支柱旋臂吊車附附工字樑伸臂吊桿,全部和連續360°電動旋轉 REC型 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM WITH TOTAL AND CONTINOUS 360° ELECTRIC ROTATION REC 6-10.立柱式旋臂吊車附拉桿工字樑伸臂吊桿及有限制電動旋轉 RELCTT 型 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM AND LIMITED ELECTRIC ROTATION RELCTT 6-11.可移動式門型起重機在轉向輪上PM型 MOVABLE GANTRY CRANE ON STEERING WHEELS PM 6-12.旋臂吊車主要特性描述 DESCRIPTION OF JIB CRANE MAIN FEATURES 6-13.安裝人員和買方的責任和義務 RESPONSABILITIES AND DUTIES OF THE INSTALLER AND BUYER 6-14.保證 WARRANTY JIB CRANES WITH MANUAL AND ELECTRIC ROTATION 旋臂吊車附有手動和電動旋轉 Lifting systems 吊升系統 P1 JIB CRANES 旋臂吊車 JIB CRANES WITH MANUAL ROTATION... 手動旋轉的旋臂吊車.... … WITH TIE-ROD CHANNEL GIRDER BOOM CCT-MCT 附拉桿槽型樑吊桿CCT-MCT型 … WITH CANTILEVER BOOM CT-MT 附伸臂吊桿CT-MT型 … WITH TIE-ROD GIRDER BOOM CTT-MTT 附拉桿工字樑吊桿CTT-MTT型 … WITH ARTICULATED BOOM CTS-MTS 附有關節的的吊桿 CTS-MTS型 … WITH TIE-ROD CHANNEL GIRDER BOOM ON BASE PLATE CCTB 附拉桿槽型樑吊桿在底板上CCTB型 … WITH 360° CANTILEVER BOOM RMC 附360°旋轉伸臂吊桿RMC型 JIB CRANES WITH ELECTRIC ROTATION 電動旋轉的的旋臂吊車.... … WITH CANTILEVER BOOM AND LIMITED E.R. RELCT-RELMT 附旋轉伸臂吊桿和有限度的電動旋轉.RELCT-RELMT型 … WITH TIE-ROD GIRDER BOOM AND LIMITED E.R. RELCTT-RELMTT 附拉桿工字樑吊桿和有限度的電動旋轉RELCTT-RELMTT型 … WITH 360° CANTILEVER BOOM AND CONTINUE E.R. REC 附360°旋轉伸臂吊桿和繼續使用電動旋轉. REC型 GANTRY CRANES … 龍門起重機 … MOVABLE ON STEERING WHEELS PM 在方向輪上可移動PM型 P2 DESCRIPTION OF JIB CRANE MAIN FEATURES 旋臂吊車主要特性描述 LEGISLATIVE AND NORMATIVE REFERENCES 立法和規範性參考文獻 The jib cranes are planned and built in respect of the following norms: 旋臂吊車的規劃和建造遵循以下規範: Directive 98/37/CE – Attachment II A 98/37 / CE 規則- 附件II A. Of the European Parliament and Council of June 22th 1998 1998年6月22日的歐洲議會和理事會 Concerning the approach of member states legislation about machines 會員國關於機器的立法的方法 Low Tension Directive (DBT) 73/23/CEE 低張力指令規則-(DBT)73/23 / CEE It appears in the Italian Legislative Organisation with the Law 791/77 它出現在意大利立法組織的第791/77號法律中 Modified with Legislative Decree 626/96 and 277/97 根據第626/96號和第277/97號法令修改 Electromagnetic Compatibility Directive (EMC) 89/336/CEE - 92/31/CEE 電磁兼容性指令(EMC)89/336 / CEE - 92/31 / CEE It appears in the Italian Legislative Organisation with Legislative Decree 476/92 它出現在意大利立法組織,第476/92號法令 Modified with Legislative Decree 615/96 根據第615/96號法令修改 Technical and national harmonized rules took into consideration: 考慮到技術和國家統一規則: - UNI EN 12100-1: 2005 Machine safety – Fundamental concepts, general planning concepts - UNI EN 12100-1:2005機器安全 - 基本概念,總體規劃概念 - Part 1: Terminology rules, methodology. - 第1部分:術語規則,方法。 - UNI EN 12100-2: 2005 Machine safety – Fundamental concepts, general planning concepts - UNI EN 12100-2:2005機器安全 - 基本概念,總體規劃概念 - Part 2: Technical Principles. - 第2部分:技術原則。 - UNI ISO 4301/88 Classification of lifting systems. - UNI ISO 4301/88吊升系統分類。 - UNI 7670/88 Calculation of lifting systems mechanisms. - UNI 7670/88吊升系統機構的計算。 - UNI EN 294: 1993 Machine safety – Safety distances to prevent to reach dangerous zones for the superior limbs. - UNI EN 294:1993機器安全 - 防止上肢達到危險區域的安全距離。 - UNI EN 349: 1994 Machine safety – Minimum spaces to prevent the crushing of some parts of the body. - UNI EN 349:1994機器安全 - 防止身體某些部位擠壓的最小空間。 - UNI EN 842: 1997 Machine safety – Danger visual signals – General requirements, planning and tests. - UNI EN 842:1997機器安全 - 危險視覺信號 - 一般要求,計劃和測試。 - CEI EN 60204-1: 1993 Machine safety – Electric equipments of machines - CEI EN 60204-1:1993機器安全 - 機器的電氣設備 - Part 1: general rules. - 第1部分:一般規則。 - FEM 9683/95 Selection of lifting and travelling engines. - FEM 9683/95起重和行走發動機的選擇。 - FEM 9941/95 Control symbology. - FEM 9941/95控制符號系統。 - FEM 9755/93 Safety Working Periods (S.W.P.). - FEM 9755/93安全工作期(S.W.P.)。 - CNR UNI 10011/85 Steel structures – calculation, realization, test and maintenance instructions. - CNR UNI 10011/85鋼結構 - 計算,實現,測試和維護說明。 - CNR UNI 10021/85 Steel structures for lifting machines. Calculation, realization, test and maintenance instructions. - CNR UNI 10021/85起重機械用鋼結構。 計算,實現,測試和維護說明。 - CNR UNI 10022/85 Cold produced structural shapes: instructions for their use in the constructions. - CNR UNI 10022/85冷作結構形狀:在結構中使用的說明。 ENCLOSED DOCUMENTATION 附屬文件 Jib cranes are supplied with the CE marking and CE conformity declaration. 旋臂起重機附有CE標誌和CE合格聲明。 CLASS OF SERVICE 服務類別 Structural crane components are established in the class of service ISO A4 - UNI ISO 4301/88. 結構起重機部件在ISO A4 - UNI ISO 4301/88服務等級中建立。 PAINTING 油漆 Structural crane components are painted with anti-rust and two coats of yellow enamel RAL 1007. On demand, structural crane components can be painted by sandblast or hot galvanization. STANDARD CONDITION OF USE Temperature: Tmin = -10°C Tmax = 40°C Envrironment: Protected against the atmospheric agents 結構起重機部件塗有防銹漆和兩層黃色琺瑯RAL 1007。根據需要,結構起重機部件可以噴砂或熱鍍鋅。 標準使用條件 溫度:Tmin = -10°C Tmax = 40°C環境:保護防止大氣介質 SUPPLYING TERMS 供應條款 Warranty: 24 months Prices: ex-works Packing: included 保固:24個月價格:出廠包裝:已包含 Hoist: not included. Available on request. 起重機:不包括在內。可以依要求辦到。 P3 RESPONSABILITIES AND DUTIES OF THE INSTALLER AND BUYER 安裝人員和買方的責任和義務 PREMINILARY OPERATIONS 初步運作 Before proceeding with the installation of any crane, it would be appropriate to carry out the following operations: 在進行任何起重機的安裝之前,進行以下操作是才適當的: a) check that working area of the crane is suitable for the chosen crane model , in particular that in its action does not interfere with other machines or constructions. a)檢查起重機的工作區域是否適合所選的起重機型號,特別是在其動作中不會干擾其他機器或結構。 b) check that electrical system is functioning and in particular: b)檢查電氣系統是否正常運行,特別是: 1) the line cable section must be measured to bear the absorption of the engines (lifting and/or dragging); 1)必須測量纜線部分足以承受發動機的吸收(吊升和/或拖曳); 2) the line must be protected by a magnetothermic earth full device switch; 2)線路必須用磁熱全接地設備開關保護; 3) the earthing system must be effective and functioning 3)接地系統必須有效且有功能 c) prearrange the necessary equipment for lifting of the charges to execute dynamic and static load test; c)預先安排吊升負荷所需的設備,以進行動態和靜態負載測試; d) place following charges at disposal for the load test: d)為了負載測試提供以下規定: 1) static test: nominal capacity x 1,25; 1)靜態試驗:標稱荷重x 1,25; 2) dynamic test: nominal capacity x 1,10; 2)動態試驗:標稱容量x 1,10; e) check crane installation works do not interfere with normal workshop activity (factory, yard, etc…) which can determine dangerous situations for the workers. In the case of interferences, isolate the working area and the ways out of the means of transport, y strip and signals concerning machines in motion. e)檢查起重機安裝工程是否干擾正常的車間活動(工廠,院子等......) 這可以確定工人的危險情況。 在干擾的情況下,隔離工作區域和運輸工具的出入口,黃色帶子和機器移動的信號 PRELIMINARY TESTS FOR THE INSTALLATION OF “BRACKET-MOUNTED JIB CRANE” CHECK BEARING STRUCTURES (pillars, manufactured articles, masonries, etc…)ARE SUITABLE TO BEAR HORIZONTAL AND VERTICAL CRANE STRESS. 安裝“支架安裝的旋臂起重機”檢查軸承結構(支撑,製造号,磚石等......)的初步測試適合承受水平和垂直起重應力。 IN PARTICULAR, CHECK THE DIMENSIONS OF THESE CRANES WOULD BE SUITABLE FOR TOOTH WITH BRACKETS AND TIE-RODS WHICH ARE FURNISHED WITH THE CRANE. 特別是,檢查這些起重機的尺寸是否適合用於帶有齒的支架和拉桿來完成本超重機。 PRELIMINARY TESTS FOR THE INSTALLATION OF “COLUMN-MOUNTED JIB CRANE” THE BUILDING FIRM ALWAYS SUGGESTS TO FIX “COLUMN-MOUNTED JIB CRANE” ON THE NEW PLINTH. 安裝“立柱式的旋臂起重機”的初步測試建造公司總是建議固定在新的平台上 “立柱式的旋臂起重機”。 As alternative, after the advice and taking on the full responsibility of skilled workers, the customer can choose a fixing on the flooring by means of chemical products and threaded bars. 作為替代方案,在建議並承擔技術工人的全部責任後,客戶可以選擇通過化學產品和螺紋桿固定地板。 STRESS FEATURES TO THE BASE OF THE COLUMN WHERE MEASURE THE PLINTH ARE FURNISHED ON DEMAND BY THE BUILDING FIRM. 在建築公司根據需求測量平台的柱子底部的應力特性。 THE MEASUREMENT OF THE PLINTH ITSELF SHALL BE MADE FROM TIME TO TIME BY THE CUSTOMER 客戶應不時對其平台自身進行測量 WHO WILL FOLLOW, OVER ITS OWN RESPONSIBILITY THE GROUND FEATURES AND ANY INTERACTION WITH EXISTING FOUNDATION STRUCTURES. 這些人將遵循超過其自身的責任,承擔接地特性以及與現有基礎結構的任何相互作用。 INSTALLATION OF JIB CRANES 安裝旋臂起重機 BEFORE PROCEEDING WITH THE INSTALLATION OF THE CRANE, CHECK THAT IS IN COMPLIANCE WITH BUILDER DEMANDS AND READ THE DIRECTIONS CAREFULLY WRITTEN IN THE INSTRUCTION MANUAL. 在安裝起重機之前,請檢查是否符合造商的要求,並仔細閱讀使用說明書中的規定。 INSTALLER DUTIES 安裝人員的責任 After having installed the cranes following directions carefully written in the “Instruction Manual”, the installer duties are: 按照“使用說明書”中的說明安裝起重機後,安裝人員的職責是: 1) put the crane in working doing test as indicated in this Manual; 1)按照本手冊的規定,將起重機置於工作狀態; 2) write “Use Pass Certificate” and in case of lack of this certificate supplied by the installer, it is possible to use and compile the certificate supplied by the building firm; 2)寫“使用通過證書”,如果安裝人員提供的證書不足,可以使用並編制建造公司提供的證書; 3) compile Control Register 3)編譯控制登記 P4 WARRANTY 保證 DUTIES 職責 In case of damage or failure the Company: 如果發生損壞或故障,公司: commit itself to repair or replace the product free of charge, if it has been used correctly and in accordance with the instructions of use written in the manual enclosed. 如果使用正確並且符合本手冊中的使用說明,則承諾免費維修或更換產品。 DUTY LENGTH 責任期間長度 This engagement is valid for a period of 24 months from the delivery and tested installation date, after acceptance of the respective document. 在接受相應文件後,此約定在交付和測試安裝日期後的24個月內有效。 However, the warranty is consequent to the notification by recorded-delivery letter, within 8 days from the discovery of any possible damage, upon check of the manufacturer. 但是,保修是在發現製造商檢查後,在發現任何可能的損壞後的8天內通過記錄交付信函通知的。 WARRANTY 保證 The warranty includes replacement and reparation of detective part (component, machine or any part of it) except disassembly, reassembly and transport expenses. 保修包括更換和修理檢測部件(部件,機器或其任何部分),但拆卸,重新組裝和運輸費用除外。 The replacement of detective part does not extend the warranty on the whole machine, except that is a complete replacement. 更換檢測部件不會延長整機的保修期,除非是完全更換。 In this way, the manufacturer is exempted from every compensation duty and the purchaser renounces to any request of charges or third party damages, due to the unuse of the machine. 通過這種方式,製造商免除了每項賠償責任,並且由於不使用機器,購買者放棄了任何收費或第三方損害賠償請求。 EXCLUSIONS 排除 From the warranty are excluded damaged parts by accident during the transport for carelessness or wrong connection to the power electric line (when these operations are made by the customer) as well as for the normal wear of the parts due to the environmental conditions. 在保修期內,由於交通疏忽或電力電線的錯誤連接(當客戶進行這些操作時)以及由於環境條件導致的部件的正常磨損,在運輸過程中意外排除損壞的部件。 Moreover, are excluded all failures produced by insufficient or wrong maintenance, inexperience and incorrect use, modification and reparation not authorized. 此外,排除因維護不足或錯誤,缺乏經驗和不正確使用,修改和修復未經授權而產生的所有故障。 WARRANTY VALIDITY 保證有效 The warranty validity is subject to the right execution of the maintenance works written in the instruction manual as well as the periodically maintenances planned in Control Register of the machine confirmed by the declarations of the operators appointed by the purchaser. Warranty declines when conditions of payment are not respected. For parts supplied by third party are valid the same warranties of builders. Competent authority for any dispute is the Court of Urbino city. 保修有效期取決於正確執行說明手冊中所述的維護工作,以及由購買者指定的操作員聲明確認的機器控制登記冊中計劃的定期維護。 如果不遵守付款條件,保修會拒絕。 對於由第三方提供的部件,對建造者的保修有效。 任何爭議的主管當局是烏爾比諾市法院。 P5 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM CCT 立柱型旋臂吊車附拉桿槽型樑吊桿CCT型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearings, adjustable brake, hoist-holder trolley, flat cable, plastic cable-holder, ON-OFF switch on the column, anti-rust and two coat of enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,可調整刹車,吊升支架小車,扁平電纜, 塑料電纜支架,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM MCT 支架安裝式旋臂吊車附拉桿槽型樑吊桿MCT型 Equipped with: 配備有: brackets in pressed sheet steel, rotating boom on ball bearings, adjustable brake, hoist-holder trolley, flat cable,plastic cable-holder, anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,可調整刹車,吊升支架小車,扁平電纜,塑料電纜支架,防銹和兩層琺瑯油漆。 COLUMN-MOUNTED JIB CRANE 立柱型旋臂吊車 MODEL 型號 CAPACITY 能力KG. 公斤 STRADDLE 臂長B mt. 米 HEIGHT 高度 TOTAL H 全高米 mt. UNDER JIB H1 臂下高H1 米 TROLLEY 小車 BRACKET-MOUNTED JIB CRANE 支架安裝式旋臂吊車 MODEL 型號 CRANE CLASS 起重機等級 Pillar width 支撑柱寬度 P6 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM CT 立柱式旋臂吊車附工字樑伸臂吊桿 CT型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearings, adjustable brake, flat cable, plastic cable-holder trolleys, ON-OFF switch on the column, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH CANTILEVER BOOM MT 支架安裝式旋臂吊車附工字樑伸臂吊桿 MT型 Equipped with: 配備有: brackets in pressed sheet steel, rotating boom on ball bearings, adjustable brake, flat cable, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,,防銹和兩層琺瑯油漆。 COLUMN-MOUNTED JIB CRANE 立柱式旋臂吊車 BRACKET-MOUNTED JIB CRANE 支架安裝式旋臂吊車 MODEL 型號 CAPACITY KG. 能力公斤。 STRADDLE B臂長B 米 HEIGHT 高度 TOTAL H 全高米 mt. UNDER JIB H1 臂下高H1 米 MODEL 型號 CRANE CLASS 起重機等級 Pillar width 支撑柱寬度 P7 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM CTT 立柱式旋臂吊車附拉桿工字樑伸臂吊桿 CTT型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearing, adjustable brake, flat cable, plastic cable-holder trolleys,ON-OFF switch on the column, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM MTT 支架安裝式旋臂吊車附拉桿工字樑伸臂吊桿 MTT型 Equipped with: 配備有: brackets in pressed sheet steel, rotating boom on ball bearings, adjustable brake, flat cable, plastic cable-holder trolleys,anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,,防銹和兩層琺瑯油漆。 COLUMN-MOUNTED JIB CRANE 立柱式旋臂吊車 BRACKET-MOUNTED JIB CRANE 支架安裝式旋臂吊車 MODEL 型號 CAPACITY KG. 能力公斤。 STRADDLE B臂長B 米 HEIGHT 高度 TOTAL H 全高米 mt. UNDER JIB H1 臂下高H1 米 MODEL 型號 Pillar width 支撑柱寬度 P8 COLUMN-MOUNTED JIB CRANE WITH ARTICULATED BOOM CTS 立柱式旋臂吊車附有關節的的吊桿CTS型 Equipped with: 配備有: column in pressed sheet steel, rotating articulated boom on ball bearings, double adjustable brake, flat cable, plastic cable-holder trolleys, fixed eye-bolt mounted on the top, ON-OFF switch on the column, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉關節的的吊桿上有滾珠軸承,雙可調整刹車,扁平電纜,塑料電纜支架小車,固定吊環螺栓裝在頂部,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 。 BRACKET-MOUNTED JIB CRANE WITH ARTICULATED BOOM MTS 支架安裝式旋臂吊車附有關節的的吊桿MTS型 Equipped with: 配備有: column in pressed sheet steel, rotating articulated boom on ball bearings, adjustable brake, flat cable, plastic cable-holder trolleys, fixed eye-bolt mounted on the top, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉關節的的吊桿上有滾珠軸承,可調整刹車,扁平電纜,塑料電纜支架小車,固定吊環螺栓裝在頂部,防銹和兩層琺瑯油漆。 P9 JIB CRANE WITH TIE-ROD CHANNEL GIRDER BOOM ON MOVABLE BASE PLATE CCTB 旋臂吊車附拉桿槽型樑吊桿在可移動底板上CCTB型 Equipped with: 配備有: column in pressed sheet steel placed on a sheet steel base plate which must be filled up with the concrete (not included), lower holes for the lifting and travelling by the lifter trolley, must have rotating boom on bearings, adjustable brake, cable-holder trolley, flat cable, plastic cable-holder trolleys, ON-OFF switch on the column, anti-rust and and two coats enamel painting. 壓製鋼板上的鋼柱放在鋼板底板上,鋼板底板必須填滿混凝土(不包括在內)下部孔用於吊升並且可籍由升降機小車行駛,旋轉臂上有必須有軸承,可調整刹車, 電纜支架小車,扁平電纜 ,塑料電纜支架,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆。 P10 JIB CRANE WITH CANTILEVER BOOM WITH MANUAL, TOTAL AND CONTINOUS 360° ROTATION RMC 旋臂吊車附附工字樑伸臂吊桿,手動 ,全部和連續360°旋轉RMC 型 Equipped with: 配備有: column and flanged section fitting in pressed sheet steel, rotating boom on ball bearings, multipolar line manifold with rotating head, flat cable, plastic cable-holder trolleys, ON-OFF switch on the column, anti-rust and two coats enamel painting. 柱和法蘭部分由壓製鋼板作成,旋轉臂上有滾珠軸承,附旋轉頭的多極線歧管,扁平電纜,塑料電纜架小車,立柱上的ON-OFF開關,防銹和兩層琺瑯油漆 JIB CRANE WITH TOTAL AND CONTINOUS 360° ROTATION JIB起重機具有360°和360°連續旋轉 旋臂吊車,全部和連續360°旋轉 P11 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM AND LIMITED ELECTRIC ROTATION RELCT 立柱式旋臂吊車附工字樑伸臂吊桿及有限制電動旋轉 RELCT 型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearings, motor-reducer, pinion, cogwheel, electric panel according to the CEI norm with “inverter” for the modulation of the rotation speed, flat cable and power and panel connection cables, plastic cable-holder trolleys, anti-rust and two coats enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,電動減速器,小齒輪,齒輪,電動面板, 按照CEI規範用“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH CANTILEVER BOOM AND LIMITED ELECTRIC ROTATION RELMT 支架安裝式旋臂吊車附工字樑吊桿及有限制電動旋轉RELMT型 Equipped with: 配備有 brackets in pressed sheet steel, rotating boom on ball bearings, moto-reducer, pinion, cogwheel, electric panel according to the CEI norm with “inverter” for the modulation of the rotation speed, flat cable, power and panel connection cables, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,電動減速機,小齒輪,齒輪,電動面板 ,按照CEI規範,“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆。 Pillar width 支柱寬度 COLUMN-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM AND LIMITED ELECTRIC ROTATION RELCTT 立柱式旋臂吊車附拉桿工字樑伸臂吊桿及有限制電動旋轉 RELCTT 型 Equipped with: 配備有: column in pressed sheet steel, rotating boom on ball bearings, moto-reducer, pinion, cogwheel, electric panel according to flat cable, and power and panel connection cables, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板柱,旋轉臂上有滾珠軸承,電動減速器,小齒輪,齒輪,電動面板 , 按照CEI規範用“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆。 BRACKET-MOUNTED JIB CRANE WITH TIE-ROD GIRDER BOOM AND LIMITED ELECTRIC ROTATION RELMTT 支架安裝式旋臂吊車附工字樑吊桿及有限制電動旋轉RELMTT型 Equipped with: 配備有: brackets in pressed sheet steel, rotating boom on ball bearings, moto-reducer, pinion, cogwheel, electric panel according to the CEI norm with “inverter” for the modulation of the rotation speed, flat cable, power and panel connection cables, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板支架,旋轉臂上有滾珠軸承,電動減速機,小齒輪,齒輪,電動面板 按照CEI規範用“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆, Pillar width 支柱寬度 P13 COLUMN-MOUNTED JIB CRANE WITH CANTILEVER BOOM WITH TOTAL AND CONTINOUS 360° ELECTRIC ROTATION REC 獨立支柱旋臂吊車附附工字樑伸臂吊桿,全部和連續360°電動旋轉 REC型 Equipped with: 配備有: column in pressed sheet steel, IPE or boxed boom, moto-reducer, base bearings, electric panel according to the CEI norm with “inverter” for the modulation cables, plastic cable-holder trolleys, anti-rust and two coats of enamel painting. 壓製鋼板柱, IPE或箱式吊桿,,機動減速器,底座軸承,電動面板 根據CEI規範用“變頻器”調整轉速,扁平電纜和電源和面板連接電纜,塑料電纜架小車,防銹和兩層琺瑯油漆。 electric limits to bound the rotating field of the crane 限制起重機旋轉區域的電氣限制 push-button panel mounted on the channel metal sliding trolleys 按鈕面板安裝在槽型鋼金屬滑動小車上 JIB CRANE WITH TOTAL AND CONTINOUS 360° ELECTRIC ROTATION 旋臂吊車附附全部和連續360°電動旋轉 14 MOVABLE GANTRY CRANE ON STEERING WHEELS PM 可移動式門型起重機在轉向輪上PM型 Equipped with: 配備有: IPE beam bridge connected with bolts to the rod piers and lateral stiffing bridges in metal tubulars support bolted perforated plates on steering wheels anti-rust and two coats of enamel painting. IPE工字樑橋用螺栓連接到桿墩和用金屬管支撐的側向剛性橋 轉向輪上的螺栓穿孔板 ,防銹和兩層琺瑯油漆。 。 MOVABLE GANTRY CRANE ON STEERING WHEELS 可移動式門型起重機在轉向輪上