5b-6.外殼的固定和吊夾HANGING AND FIXING OF THE HOUSING
5b-6.外殼的固定和吊夾HANGING AND FIXING OF THE HOUSING
5b, CLICK DUCTOR盒型絕緣導電軌,可達到400A容量 NEW 下載down load
IINSULATED CONDUCTOR BAR FOR CURRENT CAPACITY UP TO 400A
2. 可依賴的導電軌系統(7心) RELIABLE CONDUCTOR SYSTEM
3. CLICK DUCTOR電軌系統CONDUCTOR SYSTEM
結合成多用途及高效益 COMBINATION OF FLEXIBILITY AND EFFICIENCY
4. 盒型RC4和RC7電軌HOUSINGS RC4 AND RC7
5. 盒型軌道電軌RC4和RC7 RAILYPEN RC4 AND REC
簡介OVERVIEW OF AVAILABLE TYPES
6. 外殼的固定和吊夾HANGING AND FIXING OF THE HOUSING
7. CLICK DUCTOR銅連接CLICK DUCTORCOPPER CONNECTIONS
可以藉螺絲或卡住來作快速和有效的連接 QUICK AND SURE BY CLICKING OR SCREWING
8. 尾端入電盒END FEED BOXES
有效和可靠的解決EFFICIENT AND RELIABLE SOLUTIONS
9. 線上入電盒LINE FEED BOXES
可以更有彈性設計DESIGNED FOR MORE FLEXIBILITY
10. 銅導體的連接CONNECTING THE COPPER CONDUCTORS
使用吊夾和盒子作有技巧的解決 SKILLFUL SOLUTIONS WITH CLAMPES AND BOXES
11. 集電架小車系列C7/G COLLECTOR TROLLEYS SERIES C7/G
有良好的接觸特性EXCELLENT CONTACT CHARACTERISTICS
12. 集電架小車COLLECTOR TROLLEYS
高性能標準系列STANDARD SERIES FOR HIGH PERFORMANCE
13. 集電架小車系列CL4-40/G COLLECTOR TROLLEY SERIES CL4-40/G
每相雙碳刷,結實的解決方法 THE COMPACT SOLUTION FOR DOUBLE BRUSHES PER PHASE
14. 集電架小車配件ACCESSORIES FOR COLLECTOR TROLLEYS
托臂,傳送盒TOWING ARMS , TRANSITION BOXES
15. 標準集電架小車托臂和傳送盒簡介 OVERVIEW STANDARD COLLECTOR TROLLEYS , TOWING
ARMS AND TRANSITION BOXES
16. CLICK DUCTOR系統SYSTEMS
每線性米的效益EFFICIENCY PER LINEAR METER
17. CLICK DUCTOR系統組合圖示 CONFIGURATION OF CLICK-DUCTOR SYTEMS
重要摘要IMPORTANT REMARKS
18. 更多技術數據和訂單參考MORE ON CLICK-DUCTOR TECHNICAL DATA AND ORDERING
REFERENCES
19. 其他導軌系統 OTHER CONDUCTOR BAR SYSTEMS ALWAYS THE PERFECT SOLUTION
20. 能量的多用性FLEXIBLE WITH ENERGY
The principle of the conductor bar systems with clicked or screwed conductors is based on the free ex pansion of the pvc housing and the internal conductors The conductor housing is therefore suspended in sliding hangers in which these conductors - upon the occurrence of differences of expansion can slide continuously and who are fixed at the feed point only by means of a fixed point clamp at the construction. Sliding hangers and fixed
point clamps are available in 2 types,for maximaladaption
to the environmental conditions. See adjacent frame.
Finishing of metal sliding hangers and joints
Type Z - Galvanised, for normalindoor installations. Type L - Galvanised + epoxy coated,for indoor and
outdoor installations.
Sliding hanger
Centre distance of hanger supports:
The sliding hangers are fastened to the sus pension frame by means of a bolt. As such the installation can be aligned vertically.Type BN7-Z and Type BN7-L
'355 mm : all copper capacities; indoor and outdoor installations
2032 mm : all copper capacities; indoor instal
lations only.
Fixed point clamp
tion,the conductor housing can slide freely in
The complete conductor installation is to be fastened to the suspension frame by means of a self-gripping fixed point clamp. As of this locaType VMN7-Z and Type VMN7-L
the sliding hangers when expansion differences,
due to temperature variation,occurs.
Support bracket
Type UH330 : 1=330 mm, galvanised
Type UH500/(R) : 1=500 mm, galvanised
Type UH700/(R) : 1=700 mm, galvanised
Special length on request. These brackets
have clamps attached to sliding nut assem- blies thus facilitating a flexible mounting a﹒
rangement ca-pable of accomodating various sizes of RSJ (INP) beams, allowing simple
horizontal alignment.
Note: For fast mounting on site,pre-mounted support brackets with sliding hanger are avai lable on request! See page '3 for more info.
AKAPP NO. |
DESCRPI TION | am削entls dry I humld |
1∞4570 | Sliding hanger galvanid BN7-Z | x I |
1α)4650 | Sliding hanger epoxy coaled BN7-L | I x |
1 960 IFlxed poinlclamp galvanls VMN7-Z I x I | ||
1∞ω70 IF polnlclamp galv.+epox. VMN7-L I x |