商品名稱:
1-2-1.SAF-T-BAR H型電軌(H SERIES CONDUCTOR)
詳細介紹:
更多商品
1-1-15.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Amp Range Drag Shoe Length Contour Curves? Shoe Thickness Part No. Case # 100-150 Normal 4.375 Blunt None 0.21 150SI 150A 50-100 Normal 3.75 Tapered None 0.19 70S 707-1 25-50 Light 3.00 Blunt Short 0.19 35S 401A 100-125 Normal 3.75 Blunt None 0.225 100S 601A100 Used to electrically isolate adjacent conductor sections with a 1/2” over surface gap. The sleeve will support adjacent conductor sections, but must have hangers within 6” on each side of the isolation sleeve. Collectors bridge the gap electrically. Two sleeves separated by 6” of conductor are required to prevent collectors from bridging the gap as in signal or control functions. Part No. Isolation Sleeve CA100IS Used for discontinuous circuits such as bridge controls, runway circuits at fire doors, etc., to allow collector to leave conductor and be realigned on return. Works with all bar capacities. Use with self-centering collectors only. The guide is provided with hanger clamp and end cap. The guide itself is secured to the bracket with a 3/8" bolt and the conductor is secured to the guide with a hanger clamp. Conductors must be mounted on 3" (76 mm) centers minimum. Install conductor one inch into guide throat. Part No. Pick-up Guide CP100 Used to track the collector through bar misalignments of 1/8” to ½” (3-13 mm) laterally and of up to 1/8” in the direction of contact. Self-centering collectors are not required, but dual collectors are required if power interruption cannot be tolerated. Conductors must be mounted on 3" (76 mm) centers minimum. Install conductor 1-1/2” (38 mm) into guide throat. Part No. Transfer Guide CT1001-1-14.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down loadLong Arm Collector Collector A B 35L 12.00 (305) 70L 12.00 (305) 100L 12.25 (311) 150L 12.25 (311) 70LL 14.50 (368) 100W 14.75 (375) 150LL 15.00 (381)1-1-13.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Shoe Material Current Capacity (Amps) For Collectors: Part No. Standard Copper Graphite 35 35E, 35V, 35L, 35W 35S Standard Copper Graphite 70 70E, SC70, SCL70, 70L, SCC70, SCCL70, 70LL, SD70, SE70, SDD70, SEE70 70S Standard Copper Graphite 100 100E, 100L, 100W 100S Standard Copper Graphite 150 150E, 150L, 150LL 150S1 Abrasive Cleaning Material 70 70E, SC70, SCL70, 70L, SCC70, SCCL70, 70LL, SD70, SE70, SDD70, SEE70 70XX Abrasive Cleaning Material 100 100E, 100L, 100W 100XX Abrasive Cleaning Material 150 150E, 150L, 150LL 150XX Cast Iron 70 70E, SC70, SCL70, 70L, SCC70, SCCL70, 70LL, SD70, SE70, SDD70, SEE70 70SC Description 35 amps 70 amps 100 amps 150 amps Spring 35Z 100Z 100Z 100Z Case & shoe assembly 401AS 707S 601AS100 150AS Case only (Two halves w/Screws 401A 7071 601A100 150A (2 halves w/screws) Yoke assembly 401Y 707Y 707Y 777Y Shoe Clip 100Y1-1-12.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load1-1-11.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load This assembly will accommodate up to a 2" expansion gap. The gap should be set based on the bar temperature according to the table below. Use tandem collectors to provide power across the expansion gap. The expansion section is 10 feet long and takes the place of one standard bar length. For Bar Type Expansion required at ft (m) Part No. Powerfeeds Jumper(s) included included CA90 300 (91.4) CA110XG-2 350F ONE #4 CA110 300 (91.4) CA110XG-2 350F ONE #4 CA250 200 (61.0) CA250XG-2 350F TWO #4 CA300 200 (61.0) CA300XG-2 350F TWO #4 CA350 200 (61.0) CA350XG-2 350F TWO #4 Factory curved conductor sections for applications requiring bends and curves. Please contact factory for further information and pricing. Minimum Bend Radius is 16" Minimum Bend Radius for High Heat Fiberglass cover is 57" For Bar Type Standard Heat (PVC) Standard Heat (GRD) Standard Heat (UV) Medium Heat (Lexan) High Heat (Fiberglass) CA90 CA90X10-CV CA90X10G-CV CA90X10W-CV CA90HHX10-CV CA90FIX10-CV CA110 CA110X10-CV CA110X10G-CV CA110X10W-CV CA110HHX10-CV CA110FIX10-CV CA250 CA250X10-CV CA250X10G-CV CA250X10W-CV CA250HHX10-CV CA250FIX10-CV CA300 CA300X10-CV CA300X10G-CV CA300X10W-CV CA300HHX10-CV CA300FIX10-CV CA350 CA350X10-CV CA350X10G-CV CA350X10W-CV CA350HHX10-CV CA350FIX10-CV1-1-10.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Hanger bodies are made with 1.62” (14.1mm) wide galvanized steel channel. These brackets can be used horizontally (bottom entry) or vertically (lateral entry). Spacing Between Bars, in. (mm) Part No. 1.5 (38.1) 100H4-1 2.0 (50.8) 100H4-2 Spacing Between Bars, in. (mm) Part No. 1.5 (38.1) 100P4-1 2.0 (50.8) 100P4-21-1-9.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Cross-bolt hanger clamps are factory set to snap in place, but must be field adjusted for correct sliding tension after installing the conductor (unless used as an anchor). Sliding hangers (for conductor expansion): Tighten cross bolts, then back off 1/4 turn. Anchor hangers: Tighten cross-bolts to 6 ft lb. Description Application Part No. Single Hanger, Plated Steel Indoors, clean, dry 100H Steel Single Hanger, Stainless Steel Indoors, corrosive environments 100HSS Single Hanger, Plastic Coated Steel Indoors, dirty, dry 100HN Single Hanger, with Insulator Spool, Plated Steel Indoors/outdoors, wet, dirty 100K Single Hanger, with Insulator Spool, Stainless Steel Indoors/outdoors, wet, dirty, corrosive environments 100KSS Single Hanger, with Insulator Spool, Plastic Coated Steel Indoors, outdoors, wet, dirty, corrosive 100KN Three-Pole Hanger, 1.5" Centers Indoors, clean, dry. Requires staggered collector mounting 100H3-1 Three-Pole Hanger, 2.0" Centers Indoors, clean, dry. Does not require staggered collector mounting 100H3-2 Lexan snap-in hangers for use only on Series C PVC cover rated to 160°F, with holding rib. For high temperature applications, use Cross Bolt Hanger Clamps. All push-on snap hangers require a firm press to seat the conductor into the hanger. To remove the conductor, it is recommended that it be slid out to avoid damage to the hanger. Can use instead of: Application notes: Part No. 100H, 100HN, 100K, or 100KN Same mounting dimensions as 100H hanger 100P 100H, 100HN, 100K, or 100KN Same as 100P, with "rain hat" for severe outdoor conditions 100PH 100H3-1 Multiple pole, 1.5" (38.1mm) centers: Indoors, wet, dirty. Requires staggered collector mounting 100P3-1 100H3-2 Multiple pole, 2.0" (50.8mm) centers: Indoors, wet, dirty. Does not require staggered collector mounting 100P3-2 Anchor Hanger - Incorporates fiberglass 100PA filler for added strength, includes Fiber Pin Anchor Device inserted into 1/4" field- drilled hole.1-1-8.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load CA90 CJ90 5/16" x 4" (7.9 x 101.6) Steel & 15/64" x 3.75 (5.9 x 95.3) Steel CA110 CJ110 5/16" x 4" (7.9 x 101.6) Steel & 15/64" x 3.75 (5.9 x 95.3) Copper CA250 CJ250 5/16" x 4" (7.9 x 101.6) Copper & 15/64" x 3.75 (5.9 x 95.3) Copper CA300 CJ300 5/16" x 4" (7.9 x 101.6) Copper & 15/64" x 3.75 (5.9 x 95.3) Copper The Powerfeed provides an electrical connection from power source to conductor bar. May be located at any point, but preferably near the center of the system. The powerfeed is 1 1/4" (31.8 mm) long and clamps to the top lobe of the conductor with 1/4" screws. The powerfeed is insulated by a cover and a nylon cap. The 350MCM-2 include provisions for attaching single and double-bolt 350 mcm terminals. For Type Part No. CA90 350F CA110 350F CA250 350F CA300 350F CA350 350MCM-2.Black nylon cap is driven onto end of the conductor to complete the insulation. Contoured to permit passage of the collector shoe. End caps can be used in pairs at switch transfers, interlocks, expansion gaps, and isolation points. Trim conductor slot after installation. Part No. End Cap CN100 Insul-8 Bar brackets are compatible with Series C Saf-T-Bar. Please refer to Pages; 20, 22 and 23 for more information.