PS型-能上下貨車電動拖板車 PS-type Climbing truck Autoload Stacker
材料處理設備
3.操作流程 Operation flow
3.操作流程 Operation flow
B3G.PS型-能上下貨車電動拖板車 PS-type Climbing truck Autoload Stacker 下載down load
1.PS型 能上下貨車電動拖板車 PS-type Climbing truck Autoload Stacker
2.部件介紹 Introduction parts
3.操作流程 Operation flow
4.工業車類型表依VDI 2198 Type sheet for industrial truck acc. to VDI 2198
5.尺寸 Dimensions
Operation flow 操作流程
1.Check the position of truck
2.Lift the truck from the ground surface
3.Remove the pin
4.Pull out supporting legs
5.Continue to lift the truck
6.Push back supporting legs
7.Install the pin
8.Lift the load and push the truck inside
1.檢查卡車的位置
2.將叉車從地面升起
3.拆下插梢
4.拉出支撐腿
5.繼續提起叉車
6.放回支撐腿
7.安裝插梢
8.抬起貨重並將卡車推入內部
Attention: The floor of loading carriage should be smooth and stepless for easy operation 注意:裝載車架的地板應平滑且無階梯,操作方便