3-14.對稱和偏一邊剎車輪轂SYMMETRICAL AND OFFSET HUB BRAKE WHEELS
3-14.對稱和偏一邊剎車輪轂SYMMETRICAL AND OFFSET HUB BRAKE WHEELS
fall within these dimensional parameters may still be available ,please contact the factory.
3. 鼓式剎車HI-TORK DRUM BRAKE 下載down load
3-2.內容和頁數導引說明CONTENTS AND PAGE REFERENCE GUIDE
3-3.介紹說明INTRODUCTION
3-4.介紹說明INTRODUCTION
3-5.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES
3-6.DC磁鐵操作剎車DC MAGNET OPERATED BRAKES
3-7.3相AC油壓致動器剎車
3 PHASE AC HY-THRUST TM ACTUATOR BRAKES
3-8.3相AC油壓致動器剎車
3 PHASE AC HY-THRUST TM ACTUATOR BRAKES
3-9.3相AC油壓致動器操作/防爆和防火焰剎車
3PHASE AC HY-THRUST TM OPERATED EXPLOSION-PROOF AND FLAME-PROOF BRAKES
3-10.氣動和油壓操作剎車PNEUMATIC AND HYDRAULIC OPERATED BRAKES
3-11.油壓(踏板式)剎車HYDRAULIC (PEDAL) OPERATED BRAKES
3-12.踏板操作油壓系統加到SA , ST和ST/E剎車
PEDAL OPERATED HYDRAULIC OVER-RIDE SYSTEM FOR ADDING TO BRAKE TYPES SA ,
SA/M , ST AND ST/E BRAKES
3-13.手輪和拉桿致動剎車HANDWHEEL AND LEVER APPLIED BRAKES
3-14.對稱和偏一邊剎車輪轂SYMMETRICAL AND OFFSET HUB BRAKE WHEELS
3-15.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS
3-16.齒輪型剎車鼓連軸器GEARED BRAKE WHEEL COUPLINGS
3-17.DC磁鐵剎車(SA和SA/M箱型)整流和控制器
DC MAGNET BRAKE (TYPES SA AND SA/M) RECTIFIERS AND CONTROLLERS
3-18.剎車控制箱BRAKE ENCLOSURES
Rating Data and Approximate Dimensions (inches) I Weights
|
Standard brake wheels are st from 65-45-12 ductlle iron alloy. This alloy has a minimum tensile strength of 65,000 ps,i minimum yield strength of 45,000 ps,i and this provides
excellent strength,good machinability and is resistant to s∞巾g.lt's ∞mpatible with a variety of f付ction mateIs where
the lining and the brake wheel wear evenly and smoothly. Fully machined wheels 臼 n be supplied with a parallelor pered bore and keyway to meet the customer's specjfi臼 tions. Tapered bored hubs 臼 n be provided with a bent lock washer slot to give a more positive method of locking the wheel to the shaft.The wheels 臼 n be fumished completely machined to provlde proper balance at normaloperating speeds. Brake
wheels can also be fumished semi finished with a solid or rough bored hub for final machining by the customer. Standard wheel dimensions are shown on the table above; wheels that do not
- STANDARDFEATURES 標準特性
- Manufactured from ductìle-iron alloy
- Completely machined to provide proper balanoe at normal operating speeds
- Resistant to scoring
- Wears smoothly and evenly
- Good compatibility with friction materials
- OPTIONAL FEATURES 選用特性
- Special materials,tool stee,letc.
- Deep carburizing
- Chrome plated brake path