2-5.訂購資料 ORDERING INFORMATION-02
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load
2-3.說明INTRODUCTION
2-4.訂購資料 ORDERING INFORMATION
2-5.訂購資料 ORDERING INFORMATION
2-6.MBE 型直流磁鐵操作剎車
TYPE MBE DC MAGNET OPERATED BRAKES
2-9.MBT 3相AC油壓致動剎車
TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES
2-10.MBT和MBTE 3相AC油壓致動剎車
TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES
2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING
2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES
2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application
2-14.BEM型DC電磁-油壓鼓式剎車
Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES
2-15.BEM型DC電磁-油壓鼓式剎車
Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES
2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力
The Dimensions and Rating of Type BEM SHOE BRAKES
2-17.BTM和BTME油壓-3相AC油壓致動剎車
MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES
2-18.BTM和BTME油壓-3相AC油壓致動剎車
MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES
2-19.BTM和BTME油壓致動剎車尺寸表和額定能力
DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES
2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型
MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES
2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM
2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW
2-23.聯軸器BRAKE WHEELS COUPLINGS
2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS
2-25.DC電磁剎車整流器和控制器-BE和BEM型
DC MAGNET BRAKE RECTIFIERS/CONTROLLERS
2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES
iI ExtemalTorque Spring (when fitted)
H 3-Phase AC Hy-Thrust Actuator (when fitted)
Acul alor Options (when f1tted)
εxample: 13" BTME-εd 30/5 S consists of a 13" 3-Phase AC Hy-Thrust Brake fitled Ih manual (pedal) operaled hydraulic over-ride. externaJ torque spring and adjustable IIme delay on actuator setting slroke.
- TYPICAL BRAKE CODES 典型煞車代號
- 13" BE Basic DC Brake
- 13" BEM Basic DC Brake plus: (M) pedal operated hydraullc overrld
13" BM
13" BT - Ed 30/5
Basic Pedal Operated Hydraulic Brake
Basic AC 3-Phase Brake fitted with (C) IntemalTorque Spring
- 13" BT/E - Ed 30/5S Basic AC 3-Phase Brake fitted with (E) Extemal Torque Spring and (S)
adjustable lime delay on setting
更多商品
2-6.MBE 型直流磁鐵操作剎車TYPE MBE DC MAGNET OPERATED BRAKES
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURESshoe brake designed to meet and exceed the latest AISE-NEMA specifications for mil,l crane and other heavy-duty Industrial applications. These brakes 叫11 provide a long service life with aThe "BE" type brake is a spring applied,electcally released DC minirr叫 amount of maintenance and downtime. CONSTRUCTION 結情 The brake base,shoe holders and the shoes are manufactured from ductile iron. Fabricated steellinkages ﹒The magnet case and armature are made of cast steel. AII brake hardware is corrosion resislant. Composite bushings utilized in all main pivot points. The "floating-linkages" provide positive braking action with equal lining wear. Molded brake linings are non-asbestos and provide a constant coefficient of frlction at normal operating temperatures.Shoe linings are bonded 10 the shoes delivering nearly twice the life over riveted or bolted liners. STANDARD FEATURES 樣晶體特性 Top hinged magnet prevents dirt and debris build up between the magnet case and the armature. Worn brake shoes may be replaced in minutes without disassembling Ihe brake Ilnkage assembly. Anti-frlction ∞mpositebushings ut!iized in all main pivot points for improved impact resist;mce.Class "F" insulatlon Easlly replaceable magnet coil. May be replaced without the loss of brake torque. Watertight coil and terminal box Brake shoes are easily replaced from either side of the brake. Self aligning brake shoes- prevensl wheel drag. Auto-Equalizatìon-air gap between armalure and magnet Is automatíc. Emergency brake release Floor mounting OPTIONAL FEATURES 選用特性 CJass "H" insulation Patented Self-Adíustment for the brake shoes maintains shoe clearance while mlnimizing impact loading of pívot points. Manual latching brake release lever Armature positionindicator switch WaH and ceiling mounting configurations (consult factory) TYPE 13"BE ELECTRIC SHOE BRAKE OPERATING MAGNET 燥作磁鐵 The magnet case is bolted to the base of the brake and Îs hinged at the top of the magnet case. When the magnet is energized,the armature moves to compress the torque spring. The shoes move away from the wheel and the brake is released. When the magnet ís de引可ergized,the opposite actions take place and the spring applies torque to the brake wheel through the línkages and shoes. The Auto Equallzation feature maíntains the air gap belween the armature and the magnet to optimize response time and reduce impaclstresses. BRAKE COILS 煞車繳國 The brake coil ìs made from "H" insulated magnet wire. The coil is encapsulated with a high temperature thermo-setting ∞mpound to prevent the ingress of di.moisture,011,etc,. insuring a long reliable servise life.2-7.MBE 型直流磁鐵操作剎車TYPE MBE DC MAGNET OPERATED BRAKES-02
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES VOLTAGES Shunt coils are available for a wide range of voltages for continuous (8 hour) or intermiltent (1 hour) 50%,duty cycles. The coils are designed to release at 80% of line voltage.When selecting shunt brakes for fast operation 00 DC systems,specify system voltage and use 1/2 the vollage il with series resistance. Series ∞ils are available for the complete range of currents.The series brake is designed 10 release at 40% and hold at 10% of the full load motorωrrent. The torque ratings obtained by the ∞i1s ∞mply with the latest A1SE-NEMA andard. For special voltages for appliciations,please conct the factory. AC STATIC RECTIFIER 01'1 r..C )oweted e(u\)men wnere cusomers ?fe er a DC brake,an AC1DC controller can be provided.This unit includes a transforme,r rectifleιbrake contacto,r protecUve fusìng and a static brake control timer board. The standard controller is mounted in a NEMA 3R Enclosure or on a panel for mounting inside customers existing equipment. Standard units are suitable for 230/460/575-3ph-60Hz power supplíes.For special voltages, frequencies or other applications,please contact the factory. PATENTED SELF-ADJUSTMENT FEATURE 專利自發詢盤特性 You never need 10 adjusIthis brake for lining wear! It adjusts ftself. No troublesome mechanical linkages. star wheels,or other devices for brake adjustrr are required. The simple, automatic,dependable way in which the adjustment is accomplished is explained and lIIustrated below. Each time the brake Is released,the end stop,attached to the brake rod,moves slighUy to the ght through the pivot block,adjusling plates and plate enclosure. If the brake linings have worn enough so that an adjuslment is reqre ,the end stop wlll move far enough so that an adjusting plate can drop from its upper position 10 its lower position around the brake rod. Since this adjusting plate Is not between tne end stop and the , ít shortens the effectlve avel01the brall.e fod 0 1' he appliion so that the brake is again in its correct adjustment. In this way the brakes seladjust throughout the full thickness of the IInln9s or until the linings are replaced. Thls feature delivers increased productivity and decreased maintenance lime. It also protects (he entire brake assembly from the Impact loads that can be∞me excessive as the gap between the shoes and the wheel increases. BRAKE SELECTION AND APPLlCATION煞車選用和使用 Please refer to the next page for technica,l dimensional lnformation on the 300M Series '"BE"- DC Magnet Operated Brakes. If you have an unusual application or requíre assistance in selecting the appropriate brake, please con凶clMagnetek's Application Sales Depament2-8.MBE 型直流磁鐵操作剎車TYPE MBE DC MAGNET OPERATED BRAKES-03
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES CATAlOG # 9RAKE WHEEL OIAMETER D TORQUE RATlNGS (LB.FT.) (3) WK' OF 、 BRAKE WHEELRPM (M州1 BRAKESHIP WEIGHT (L9S.) SHUNT SERIES RECTIFIER OPERATEO CONTINUOUS (8 HOUR) OUTY 1-HOUR (505) OUTYCYCLE) 1-HOUR (50%OUTY CYCLE) (1) 可12 HOUR (30%OUTY CYCLE) (1) 8-HOUR (100% OUTY CYCLE) (2) 1-tiOUR (切% OUTY CYCLE;) 8-HOUR (100%OUTY) H-ISPEEO FORCEO 8-HOUR (10閥的TY) HI-SPEEO FORCED S"BE (4) 8" BE 10" 9E 13" BE 可 6" BE 19" BE 23'"BE 30" BE 6" 8" 10" 可 3" 16" 19" 23" 30" 30 75 150 400 750 1500 3000 6750 40 100 200 550 1000 2000 4000 9000 26 65 130 365 650 1300 2600 6000 40 100 200 550 1000 2000 4000 9000 30 75 150 400 750 1500 3000 6750 40 100 200 550 1000 20∞ 4000 9000 . 1.25 2.8 12 29.5 742 155.6 8ω 9400 5870 4700 3600 2940 2470 2040 1340 98 135 206 405 675 1150 1833 3770 Rating Data General Purpose (Heavy Duty) Fitted with molded non-asbestos linings 一般用途額定數憶(車型) 5" BE 8" BE 10" 9E 13" 8E 16" 9E 19" BE 23" 9E 30" 9E 5" 8" 10" 13" 16" 19Ø 23" 30" 40 100 200 550 可 000 2000 4000 9000 40 120 240 660 1200 2650 4800 "000 40 75 165 430 770 1750 3200 7200 40 120 240 660 1200 2650 4800 1000 40 100 200 550 1000 2000 4000 9000 40 120 240 66日 1200 2650 4800 11000 0.25 1.25 2.8 12 29.5 74.2 155.6 880 9400 5870 4700 3600 2940 2470 2040 1340 98 135 206 405 675 1150 1833 37702-9.MBT 3相AC油壓致動剎車TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES The BT (and BT ) type. 3-phase AC shoe brakes are spring applied electricalIy released by a ∞mpletely sealed,∞ntinuously rated,Hy- Thrust Actuato﹒The brakes are designed to meet the latest AISE- NEMAspecifi臼 lions for mil,l c也ne and other heavy duty applicatons. These brakes are designed with a minimum number of parts to provide a long service life th reduced maintenance and downtime This versatile brake, with its many standard and optional features,can be applied to a wide range of applications and environmentalconditions, where smooth,responsive stopping and holding is required.The cushioned brake action produ臼 s signifi臼 ntly less mechanil oscillations as compared 10 the DC Armature or the AC Solenoid type brakes. The lalter are expensive to maintain in terms of spare parts placement and downtime. The inherent cushioning effect makes the brake ideal for high duty cyde or jogging applications, viually eliminating the mechanicalshock loading which n lead to increased ∞mponent wear and or ∞mponent failures Sinthe growth in popularity of AC ∞ntrolled cranes,this brake has rapidly become the standa for all crane moons.It has the same high reliability normally associated with DC dapper ,but does not require an expensive transformer/rectifier to supply the DC power and improve the brake response times. CONSTRUCTION The brake base,shoe holders and the shoes are manufactured from ductile iron. Fabricated steel linkages ﹒The actuators are manufactured of a cast aluminum alloy; include double shaft seals,gasketed joints and terminal box,making the units waterproof and dustpof 。 AII brake hardware is corrosion resistant. Composite bushings utilized in all main pivot points ﹒The“floatipg-linkages" provide positive braking action with equal lining wea'r. Molded brake linings are non-asbestos and provide a constant coefficient of friction at normal operating temperatures.Shoe linings are bonded to the shoes delivering twice the life over riveted or bolted liners. .S TANDARDFEATURES Internal torque springs 一Type BT Main pivot points are fitted with anti-friction composite bushings. Replaceable,waterproof Hy-Thrust Actuator Environmentally-safe molded non-asbestos brake linings provide a constant coefficient of friction over the normal operating temperature range.Easily replaceable brake shoes from either side of brake Brake shoes are self-aligning.Convenient manual adjustment for torque and lining wear Manual release lever Floor mounting OPTIONAL FEATURES 選用特性 Extema torque springs -'TypeB'TE ﹒Time delays on brake setting(“S") and release Self adjustment for lining wear Hydraulic,pedal operated manual over-ride systems TORQUE ADJUSTMENT OPTIONS 扭力調盜-選用 The standard Type "BT" (Internal torque spring): Torque spring compression rating is fixed within the thruster. Pre-set torque setting provided by pull rod pivot pin locations (3). Torque may be reduced to 60% of maximum rating. The optional Type "BTE" (External torque spring): Provides stepless torque adjustment Torque adjustment made by rotating the nut atop the sp討ng tube assembly Torque may be reduced to 40% of maximum rating. The actual setting can be read on the calibrated torque indicator (C.T.I.) located in the side of the spring tube assembly. RESPONSE TIME 反應時間 When used on crane bridge motions, it is acceptable to connect the Hy-Thrust actuator directly across the bridge motor terminals.For crane hoist applications,we recommend the Hy-Thrust Actuator is connected directly to the AC supply and switched by a suitable 3-phase contactor. To reduce the response time an additional 15%, motor capacitors must be connected in parallel with the motor windings, and the actuator must be switched through a contactor. A typical application for this arrangement would be container cranes or similar applications SELF-ADJUSTING 自譏諷盤 Both the“ BT" and the "BTE" type actuator brakes n beed with an optional device which automatically compensates for lining wear throughout the full thickness life of the linings. The self-adjusting feature consists of a one-way operating clutch, mounted on a special pull-rod, which replaces the standard pull rod assembly. As the brake linings wea,r the actuator stroke increases. This increased movement will cause a small arm mounted on the brake linkages to rotate the clutch/pull-rod assembly a few degrees. This rotation draws the brake arms slightly closer together, compensating for the wear in the brake shoe linings.'The optionalsef-adjusting feature eiminates the time requried 10 manualy adjuslIhe inkages for brake shoe lining wear. It does not reduoe or eliminate the planned maintenance inspections as recommended in the Operation and Maintenance manual provided with the brake.2-10.MBT和MBTE 3相AC油壓致動剎車TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES HY-THRUST ACTUATOR The Hy-Thrust electro-hydraulic actuators are proven,high peorman. relìae units that will provide 。f ubel -free ln tωgh operati conditions.The major ∞mponents of the actuator are a 3-phase moω,r centri仙galpump and a servo-cy1inder with a piston. Vastys of ftuids provide the openg medium and all the units are filled with the appropte ftuid at the factory.The impellor runs freely inside lhe cylinder and even if lhe piston rod is not allowed 10 ∞mplete its stroke. the motor is not subject to an ov。ad ∞nditlon. lmpellor is designed with unidirectional blades.This means that the 3-phase ∞nnections must be made in accordance with Ihe wirlng dlagrams lIluslrated in the Installatlon and Maintenance Instructions. STANDARD FEATURES Fast response tlmes High switchlng frequency -1200to 2000 operationsJhour Long service life -20 million switching cycles Working fluid operating range 一 -13'F(-25'C)through 12.2' F (+50.C) 8ullt-ln compre臼lon spnng (Standard T'" rype) AvailabJe for 230VAC,460VAC,575VAC/3Ph/60Hz as standard OPTJONAFl EATURES Stepless. externally adjustable time deJays Settlng ('S﹒). ReJeasing ("H"), or Both C"HS.) Speclalfluids for operating in extreme ambient temperatures External torque springs ( BTE Type) Tropicalized Corrosion Protection Statorcompletely encapsulated into motor housing under vacuum Explosion-proofand flame-proof units ElECTRICADl ESJGN 電器訟計 Motor 2-pole,3-phase AC squrirelcage Class F lnsulation slandard (Class H optional) Continuous ratIng Integra川ermlnal box wlth gasketed cover plate (IP 65) ,Terminal block 6-pole 、Cabe en '4" N'?"í Power Supply 230VAC,460VAC,575VAC/3ph/60Hz Standard ,AII unils connected in Star (Y) configuration Specialvoltages and frequencies available DC Voltage actuators are available (Contact Factory) ,Single-phase actuators are Not Available MOTOR OPERATING CURRENTS (680 F/200 C)馬連續(6作8,' F流120' C) Thruster 230 Volt 460 Volt 575 Volt EO 23 E030 EO 50 E080 EO 121 E0201 ED301 E0185 0.9 Amps 0.45 O.36 Amps 0.84 0. 4.2 0.34 1.2 0.6 0.48 2.4 1.2 0.96 2.4 1.2 0.96 2.6 1. 3 1. 0 2.8 1.4 1. 1 2. 6 1.3 1. 0 WORKING FlUID 工作流體 Standard Shell Tellus C10 ,Ambient operating lemperature range _130 F (-25'C) through 1220 F (50'c) Baysllone M20 Ambient operating tempe間划re range -40'F (-40'C) through 1760 F (800 C) TIME DELAYS ON BRAKE SET AND RElEASE T Catalog# lme to Extend (Sec) Tlme to Retract fSecl Wltho叫With Wrthout 1 With Vavl e Val ve Valve Valve EO 2315 ED 3015 EO 50/6 EO 80/6 ε1)t1.!1i EO 201/6 EO 301/6 EO 50/12 EO 80/12 EO 121112 EO 201 /12 EO 301112 0.4 0.4 0.5 0,4 '2A 0.5 0.6 0.8 0.6 08 1.0 1.1 0.7-6.0 0.5- 8.0 0.7-10.0 O.已-8.0 '2. 0.7-10.0 0.7-12.0 1.0-16.0 0.9-12.0 1。一16.0 1.各-200 1.6-22.0 0.4 0.4 0.4 0.4 β '2.-2 0.4 0.4 0.6 0.5 0.7 0.5 0.5 0.6-6.0 。‘58- .0 0.5-8.0 0.4--8.0 Q.'Qll D.4-8.0 0.4-8.0 。7-12.0 0.6-10.0 0.8-14.0 0.6-10.0 0.9-一10.0 Ap proxJmaω operatmg tlmes snd Ilme de∞nds) al68、F(20"C)w , Ing 01118mperalu, By fitting the optìonal ,extemally adjustable tíme delays,the basic brake operating characteristics n be altered to make the brake suitable for a different set of operating conditions. On the BTE (extemal 10ue spring) the installation of the time delay (S' will enhance the smooth opera討on of the brake. This smooth action,with on-site adjustment capabiilty makes this type of brake ldeal for crane bdges. troleys. conveyors,and ship loaders.This fealure can also be used 10 provide a simple method of discriminatlng between the service and emergency brakes on dual d叫ve appllcatlons. When Ihe time delay is Installed on the relea (H,) the brake release cal') be delayed until the motor or drive has sed developing torque. A typicle 1 application would be an inclined ∞nveyor. where the brake release can be delayed to allow the motorlfluld coupling to develop forward torque. preventing the conveyor to 'run-back" under the load at start-up. BRAKE SElECTJON AND APPlICATION 煞車道悶和使用 Please refer to the following page for techni1. dimensional information on the 300M Sr Type - 3-Phase AC Hy Thrust Operated Brakes. If you have an unusual application or require assistance in selecting the approp吋ate brake,piease contact Magnetek's Application Sales Department.2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES Rating Data AISE-NEMA and General Purpose (Heavy Duty) Fitted wíth Molded No仟Asbestos Linings CA1ALOG BRAKE WHEEL OIAMETER D TORQUE RAT1NGS (LB.FT.) (1) POWER INPUT 仰'ATTS) (3) WK' OF 8RAKE WHEEL (L8.FT.') 8RAKE WHEEL RPM (MAX) 8'RKE SHIP W日GHT (L8S.) TYPE 8T TYPE 8T/E AISE-NEMA GENERAL PURPOSE 58T - E02315C 8" 8T • E023/5C 10" 8T •E02315C • E030/5C 13" 8T - E03015C • E050/6C •E080/6C 可 6"8T • E030/5C • E050/6C -6080)6C • E0121/6C 19"8T • ED80/6C • E0121/ 6C • E0201/6C 2通IUBT •EOßOl6C -60121/6C • E0201/6C • ED301/6C 30" 8T ..E0121/6C • E020可(6C - E0301/6C 5" 8T/E • E023/5 8" 8T/E • E023/6 10" 8T(E • E023/5 .6030/5 13" 8T/E - E030/5 - E050/6 • E080/6 16" 8T/E - E030/5 • E050/6 - 6080/6 • E0121/6 19" 8TIE • E080/6 -ED121/6 - E0201/6 2:" 8TIE •EDßOl6 • E0121/6 - 6020116 .60301/6 30" 8T/E • ED121/6 -6020可16 .60301/6 5" 8" 10司 10" 13' 13- 13' 16" 16" 16' 16' 19' 19' 19' 2:\' 23. 23' 23' 30' 30' 30' r 一 100 200 一 550 一 1000 一 2000 一 4000 一 9000 50 155 220 260 400 550 660 500 750 1150 1400 1500 2100 2650 可750 3000 4000 5000 3500 6750 11000 140 140 140 175 175 190 260 175 190 260 310 260 310 430 250 310 430 530 310 430 530 0.25 1.25 2.80 一 一 一 7420 一 '55.50 一 880.00 一 9400 5870 4700 一 3600 一 一 一 2470 2040 一 一 1340 一 一 70 95 115 125 235 240 450 455 475 960 990 990 可050 1080 1080 1080 1510 1510 15102-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES The manual pedaloperated. lIy set- spring released shoe brakes (Type "BM") are deslgned 10 meelthe lalest AISE NEMAspecîfitions for mill. crane and other similar heavy-duty applications. The single.ωgged. wheel (slave) cylinder acts directly on the brake anns to apply varìable forceltorque 10 the brake wheel lhrough lhe brake shoes. The simple design provides a long service life wilh a minimum of mainlenance and down time. CONSTRUCTION " The brake base. shoe holders and lhe shoes are manufactured from ductìle iron. Fabricated steellinkages. The unique self-centerlng aclion compensaled fora certaln amount of mlsallgnment In both the horizon他1 and vertìcal axes. AII brake hardware is corroslon resistant. Composite bushlngs utlllzed In all maln pivot polnts. Molded brake IInings are non-asbestos and provide a ∞nstanl coefficient of r叫ction at nonnal operating temperatures. Shoe linlngs are bonded 10 the shoes delivering nearly Iwice the life over riveled or bolted IIners. TYPE 8" BM HYDRAUL!C BRAKE STANDARD FEATURES 標准特性 Manual bleeding syslem. Short pedal slroke for full braking power through the use of a dual action masler cylínder Maximum pedalfo明70pounds一 OSHA uiremenls. Brake shoes are easily dfrom eilher side of brake. Self-aligning shoes prevent wheel drag. Self-aligning shoes for IInlng wear. Equal shoe clearan is automatic -no adjustment is ne ssary. OPTIONAL FEATURES 道用特性 l"lRemole control bleedlng syslem from operalor's 臼 b. DIRECT ACTING WHEEL (SLAVE) CY LlNDER brake so there is no possibìlity of oil from Ihe 1∞se fittings drlpping行1s direct acilng design ellminales lhe addltional wear and mainlenance assoclaled wilh Ihe long cylinder designs. The sel弘 adjusting fealure of Ihe dlrect acting cyllnder provìdes a nstanl. minimum shoe clearance alall times Ihroughoulthe usefullife of the brake shoe IInings. The cylinder ís mounted at the end of Ihe on the brake linings or brake wheels. SELF-ADJUSTING 13 Every lJme Ihe brake is applied.1Iadjusls itself for any wear lhal has laken place. When released the clearance is always the same belween the brake shoe linings and the brake wheel. Thís fealure reduces mainlenance lime and helps 10 íncrease produclivity. SELF-CENTERING 自發中心 The brake shoes are designed 10 easíly pivot on the brake linkages 10 compensale for slight verti 1 cenlering errors belween the brake and lhe wheel. Thls. along with the self-adjustlng features. also allows for sllght ho巾on|nlering erro. If a brake were 10 shíft shghtly alrighlangles 10 the molor shaft or if one of Ihe shoe IIners wears more rapidly lhan the other. the 計iction bolts will slip on lhe base under acluating pressure. reposilioning and cent叫ng the brake 10 Ihe shafUbrake wheel.刊is self-centering fealure a ures longer IIning life and a poslllve braking acllon.2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application
2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes 下載down load 2-3.說明INTRODUCTION 2-4.訂購資料 ORDERING INFORMATION 2-5.訂購資料 ORDERING INFORMATION 2-6.MBE 型直流磁鐵操作剎車 TYPE MBE DC MAGNET OPERATED BRAKES 2-9.MBT 3相AC油壓致動剎車 TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES 2-10.MBT和MBTE 3相AC油壓致動剎車 TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES 2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING 2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES 2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application 2-14.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-15.BEM型DC電磁-油壓鼓式剎車 Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES 2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力 The Dimensions and Rating of Type BEM SHOE BRAKES 2-17.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-18.BTM和BTME油壓-3相AC油壓致動剎車 MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES 2-19.BTM和BTME油壓致動剎車尺寸表和額定能力 DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES 2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型 MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES 2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM 2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW 2-23.聯軸器BRAKE WHEELS COUPLINGS 2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS 2-25.DC電磁剎車整流器和控制器-BE和BEM型 DC MAGNET BRAKE RECTIFIERS/CONTROLLERS 2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES Please refer below for technical.dimensional informatíon on the 300M Series 一“BM" Type-Hydraulic (Pedal) Operated Brakes. If you have an unusual appli 臼 tion or required assistance in selecting the approprlate brake,please contact Magnetek's Applicatlon Sales Departmenl. Rating Data AISE-NEMA Fitted with molded non-asbestos linings A ISE-NEAtA額定數鑄 CATALOG# BRAKE WHEEL OIAM。ETER BRAKE TORQUE (HYORAULlC) (LB.FT.) PEOAL FORCE (MAXIMUM) (LBS.) WI(2 0F BRAKE WHEEL (LB.阿') BRAKE WHEEL RPM (MAXIMUM) BRAKE SHIP WEIGHT (LBS.) 5" BM(2) 8" BM 10" BM 可 3" BM 16" BM 19" BM 5" 8" 可。" 13" 16" 19鈔 40 100 200 550 1000 2000 70 70 70 70 70 70 0.25 1.25 2.80 12.00 29.50 74.20 9400 5870 4700 3600 2940 2470 45 52 83 180 305 458 (1) Brake selectlon should be based on torque and duty.When braking servlce Is severe,the WK'of lhe load speed Of the brake wheel and maxîmum number of stops per minute should be submitted 10 the factory for recommendalion. (2) AISE-NEMA does not define B 5-inch brake. For serectlon and appllcaUon data refBr to lhe Appllcation Bnd Engineering Data secllon.