1-4-18.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
點擊圖片放大1-4-18.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄
1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load
1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load
1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load
1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load
1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load
1-6.CLUSTER電軌CLUSTER BAR 下載down load
Curved 8-Bar Factory curved conductors. Refer to page 27 to specify your curve requirements. Consult Factory for your curved 8-Bar Requirements. Maximum length: 10 feet (3.05 meters).
Cover Type | Conductor Bar | Current Cap. | Part No. | Min. Radius in. (mm) |
Rigid PVC | Galvanized Steel | 110A | 11003 | 18.0 (457) |
Rigid PVC | Stainless Clad Copper Laminate | 250A | 11007 | 18.0 (457) |
Rigid PVC | Copper Steel Laminate | 250A | 11011 | 18.0 (457) |
Rigid PVC | Rolled Copper | 350A | 11015 | 18.0 (457) |
Rigid PVC Solid Copper 500A 11018 18.0 (457)
Lexan (Medium Heat) | Galvanized Steel | 110A | 11022 | 57.0 (1447) |
Lexan (Medium Heat) | Stainless Clad Copper Laminate | 250A | 11026 | 57.0 (1447) |
Lexan (Medium Heat) | Copper Steel Laminate | 250A | 11030 | 57.0 (1447) |
Lexan (Medium Heat) | Rolled Copper | 350A | 11034 | 57.0 (1447) |
Lexan (Medium Heat) Solid Copper 500A 11037 57.0 (1447)
Polyester (High Heat) | Galvanized Steel | 110A | 11041 | 57.0 (1447) |
Polyester (High Heat) | Stainless Clad Copper Laminate | 250A | 11045 | 57.0 (1447) |
Polyester (High Heat) | Copper Steel Laminate | 250A | 11049 | 57.0 (1447) |
Polyester (High Heat) | Rolled Copper | 350A | 11053 | 57.0 (1447) |
Polyester (High Heat) Solid Copper 500A 11056 57.0 (1447)
Slip Rings
Curved segments for factory manufactured ring. Consult Factory for your curved 8-Bar Requirements.
Conductor Bar (Current Rating) | Ring Radius Range in. (mm) | Cover Material | Pieces | Part No. |
Galvanized Steel (110A) | 18.0 to 35.0 (457 to 889) | Rigid PVC | 2-180O | 23626 |
Stainless Clad Copper Laminate (250A) | 18.0 to 35.0 (457 to 889) | Rigid PVC | 2-180O | 23627 |
Copper Steel Laminate (250A) | 18.0 to 35.0 (457 to 889) | Rigid PVC | 2-180O | 23628 |
Rolled Copper (350A) | 18.0 to 35.0 (457 to 889) | Rigid PVC | 2-180O | 23629 |
Galvanized Steel (110A) | 35.1 to 54.0 (892 to 1371) | Rigid PVC | 3-120O | 23630 |
Stainless Clad Copper Laminate (250A) | 35.1 to 54.0 (892 to 1371) | Rigid PVC | 3-120O | 23631 |
Copper Steel Laminate (250A) | 35.1 to 54.0 (892 to 1371) | Rigid PVC | 3-120O | 23632 |
Rolled Copper (350A) | 35.1 to 54.0 (892 to 1371) | Rigid PVC | 3-120O | 23633 |
Solid Copper (500A) | 35.1 to 54.0 (892 to 1371) | Rigid PVC | 3-120O | 24292 |
Galvanized Steel (110A) | 54.1 to 72.0 (1374 to 1828) | Rigid PVC | 4-90O | 23634 |
Stainless Clad Copper Laminate (250A) | 54.1 to 72.0 (1374 to 1828) | Rigid PVC | 4-90O | 23635 |
Copper Steel Laminate (250A) | 54.1 to 72.0 (1374 to 1828) | Rigid PVC | 4-90O | 23636 |
Rolled Copper (350A) | 54.1 to 72.0 (1374 to 1828) | Rigid PVC | 4-90O | 23637 |
Solid Copper (500A) | 54.1 to 72.0 (1374 to 1828) | Rigid PVC | 4-90O | 24293 |
Galvanized Steel (110A) | 57.0 to 72.0 (1447 to 1828) | Lexan (Med Heat) | 4-90O | 23638 |
Stainless Clad Copper Laminate (250A) | 57.0 to 72.0 (1447 to 1828) | Lexan (Med Heat) | 4-90O | 23639 |
Copper Steel Laminate (250A) | 57.0 to 72.0 (1447 to 1828) | Lexan (Med Heat) | 4-90O | 23640 |
Rolled Copper (350A) | 57.0 to 72.0 (1447 to 1828) | Lexan (Med Heat) | 4-90O | 23641 |
Solid Copper (500A) | 57.0 to 72.0 (1447 to 1828) | Lexan (Med Heat) | 4-90O | 24294 |
更多商品
1-4-17.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down loadFor straight system runs of 600V or less. For lateral mount, consult factory. The "Self-Centering" versions are used with Pick-up Guides - See Description Part No. Wt lb (kg) Standard Mount 13613 3.1 (1.41) Standard tandem Mount 13626 5.8 ( 6.23) Self-Centering Standard Mount 13625 3.2 (1.45) Self-Centering Tandem Standard Mount 13628 6.0 (0.72) Replacement Shoe 100 amp replacement shoe 11157 0.9 ( 0.41)For straight system runs of 600V or less, and curves to a minimum of 48” radius. For lateral mount, consult factory. The "Self-Centering" versions are used with Pick-up Guides - See Description Part No. Wt lb (kg) Standard Mount 13629 1.4 (0.65) Self-Centering Standard Mount 13630 1.7 (0.77) Replacement Shoe 100 amp replacement shoe 11157 0.9 (0.41)
1-4-16.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down loadSliding contact Collector Assemblies are offered in either single or double contact shoe types providing current capacities from 30A to 200A. Operational wear is confined to easily replaceable contact shoes. The shoes are supported by insulated holders on articulating, spring-loaded collector arms.For systems up to 600 volts with straight runs and curves to 18” minimum radius. For lateral mount, consult factory. The "Self-Centering" versions are used with Pick-up Guides - See Pg. 18. Type Part No. Wt lb (kg) Standard Mount 13128 2.5 (1.13) Tandem Standard Mount 13082 4.7 (2.13) Self-Centering Tandem Standard Mount 13084 4.9 (2.22) Self-Centering Standard Mount 13130 2.6 (1.180) Replacement Shoe 30 amp replacement shoe 13136 0.4 (0.18) For systems up to 600 volts with straight runs and curves to 18” minimum radius. For lateral mount, consult factory. The "Self-Centering" versions areused with Pick-up Guides - See Description Part No. Wt lb (kg) Standard Mount 13131 1.4 (0.64) Self-Centering Standard Mount 13132 1.7 (0.77) Replacement Shoe 30 amp replacement shoe 13136 0.4 (0.18)
1-4-15.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Ordering Instructions: 1) Choose the desired bracket style by part number - See bracket styles below. 2) Also referring to the drawings below, choose the hole number locations at which hangers are to be assembled. Here is the recommended hanger spacing: Recommended Minimum Conductor Bar Spacing Indoor, inch (mm) Outdoor, inch (mm) 8 Bar (bottom entry) 2.0 (50.8) 3.0 (76.2) Side Contact (Lateral Mount) 3.0 (76.2) Not for outside use For less than 2.0” (50.8 mm) spacing, consult factory 3) Select desired hanger type by part number - From Pg. 19. 3) Select desired hanger type by part number - From Pg. 19. Example Order lines: Qty Part No. (Hole #'s) where hangers are to be mounted Description 10 31407 (1, 3, 5, 7) Web Bracket, Long (from below) 40 22800 Polycarbonate Snap Hanger (from Pg. 19) Note: When order is received, a unique part number will be created for the requested bracket/hangers combination. Bracket Hole Position Numbers: 1.0” (25.4 mm) Spacing Between Holes
1-4-14.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down loadYou can order pre-assembled brackets with your choice of hangers on Pg. 21. Or, if these hanger locations don't work for the application, the "Universal Brackets" shown below should address most special applications. Holes are drilled on 1.0 inch (25.4 mm) centers. Type Length Part No. Wt lb (kg) Web Bracket, Short 11.5 (29) 31409 1.0 (0.45) Web Bracket, Long 15.5 (39) 31407 1.3 (0.59) Flange Bracket 18.0 (46) 31408 1.2 (0.54) Flange Bracket with Beam Clips 18.0 (46) 31418 1.6 (0.73) Flange Bracket with Beam Clips 24.0 (61) 31911 2.0 (0.91)
1-4-13.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down loadBrackets w/Pre-Assembled Hanger Clamps The following brackets come with hanger clamps on 3” centers, brackets are zinc plated steel. Hanger Clamp styles are described With Polycarbonate Snap-In Hanger Clamps Without Insulators With Insulators Description Part No. Wt lb (kg) Part No. Wt lb (kg) Web type 5” 28829 2.0 (0.907) 51004 2.4 (1.09) Web type 9” 34189 3.1 (1.402) 50314 3.5 (1.59) Flange type, 2 hangers each side 51864 2.6 (1.179) 51865 3.1 (1.41) Flange type, 4 hangers on one side 51870 2.6 (1.179) 51871 3.1 (1.41) Steel Snap-In Hanger Clamps Without Insulators With Insulators Description Part No. Wt lb (kg) Part No. Wt lb (kg) Web type 6” 30281 1.6 (0.726) 51005 2.0 (0.91) Web type 9” 50312 2.7 (1.225) 50315 3.1 (1.41) Flange type, 2 hangers each side 51866 2.1 (0.953) 51867 2.5 (1.11) Flange type, 4 hangers on one side 51872 2.1 (0.953) 51873 2.5 (1.11) Cross-Bolt Hanger Clamps Without Insulators With Insulators Description Part No. Wt lb (kg) Part No. Wt lb (kg) Web type 6” 31762 2.0 (0.907) 29534 2.3 (1.04) Web type 9” 50312 3.1 (1.406) 50316 3.5 (1.59) Flange type, 2 51868 2.5(1.114) 51869 2.9(1.32)hangers each side Flange type, 4 51874 2.5 (1.114) 51875 2.9 (1.32) hangers on one side
1-4-12.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down loadFor top running, web-mounted, bottom entry systems. Zinc plated steel. See Pg. 19 for hangers. Distance to First Hole: Part No. Wt lb (kg) 6.0 (152) 22014 2.4 (1.09) 9.0 (229); with three more holes - At 12.0 (305), 15 (381), and 18 (457) 29876 4.5 (2.04) For bottom entry monorail and under-hung systems, flange-mounted. Zinc plated steel. See Pg. 19 for hangers. Type Part No. Wt lb (kg) For 2 hangers each side 27762 2.5 (1.13) For 4 hangers on one side 27767 2.5 (1.13)
1-4-11.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Hanger Clamps are designed to grip 8-Bar Conductors for stable support. Clamps are required every 5 foot (1.52m) standard. These Polycarbonate Snap-in Hanger Clamps are recommended for standard mount only; not recommended for curves or lateral mount. Type Hardware Part No. Wt lb (kg) Without Insulator Zinc Plated 22800 0.3 (0.14) Without Insulator Stainless Steel 23370 0.3 (0.14) With Insulator Zinc Plated 24405 0.3 (0.14) With Insulator Stainless Steel 28122 0.3 (0.14) The spring-steel Hanger Clamps are designed to grip 8-Bar Conductors for stable support. Clamps are required every 5 foot (1.52m) standard. Steel Snap- in Hanger Clamps are recommended for standard mounting; not recommended for curves or lateral mount. Type Part No. Wt lb (kg) Without Insulator 21600 0.2 (0.09) With Insulator 22000 0.3 (0.4) Cross-Bolt Hanger Clamps are designed to lock to 8-Bar Conductors for stable support. Hangers are required every 5’ for vertical entry, 3’ for curved systems and every 3’ 4” for lateral entry. Cross-Bolt Hanger Clamps are recommended for standard mounting, lateral mounting, and curved systems. Type Material Part No. Wt lb (kg) Without Insulator Plated Steel 11076 0.2 (0.11) Without Insulator Stainless Steel 11078 0.3 (0.14) With Insulator Plated Steel 11082 0.4 (0.18) With Insulator Stainless Steel 11084 0.4 (0.18) For standard mount, not recommended for curves or lateral mount. Type Material Part No. Wt lb (kg) Without Insulator Plated Steel 21833 0.3 (0.14) Without Insulator Stainless Steel 28123 0.3 (0.14) With Insulator Plated Steel 21982 0.5 (0.23) With Insulator Stainless Steel 28124 0.5 (0.23)
1-4-10.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down loadUsed in switches and interlocks to accomplish smooth collector transfer. Item Description Part No. Wt lb (kg) End Transfer cap for 90A bar. 22070 0.03 ( 0.01) Left Transfer cap for 90A bar. 22395 0.03 ( 0.01) Right Transfer cap for 90A bar. 22396 0.03 ( 0.01) End Transfer cap for 40-350A bar 13161 0.03 ( 0.01) Left-hand cap for 40-350A bar 14118 0.03 ( 0.01) Right-hand cap for 40-350A bar 14119 0.03 ( 0.01) The Pick-up Guide allows the collector to leave the conductor and re-track upon return. Requires use of Self-Centering J-Head Collectors,Consult Factory for selection. Used: Part No. Wt lb (kg) Indoors, for 3” bar spacing 13142 1.75 (0.79) Indoors, for 4” bar spacing 11089 1.75 (0.79) Outdoors, for 3” bar spacing 13143 2.00 (0.91) Outdoors, for 4” bar spacing 11090 2.00 (0.91)
