1.C&W電軌系統(SAF-T-BAR)新目錄                                                                        
       1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR)                                               下載down load 
       1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR)                                               下載down load

       1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR)                                                下載down load

       1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR)                                                  下載down load

       1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR)              下載down load

       1-6.CLUSTER電軌CLUSTER BAR                                                                           下載down load

Required every 300 feet (94.1 m) for steel conductors or every 200 feet (61.0 m) for copper conductors to compensate for thermal expansion.  Power feeds and flexible jumpers are factory installed to meet

electrical and mechanical requirements of your system.

Note: Part numbers are located in the Conductor tables

Conductor isolation sections are used to electrically isolate control circuits, maintenance bays, etc.  The kit includes 11127  Guide Assembly,

PVC Cover, and Isolation Section for 40A to 350A  (not including 90A).
 Consult our factory for proper selection.

Part No.	Wt lb (kg)
21841	2.3 (1.04)

Components used for in-field modification.

Description Part No.   Wt lb (kg) Molded plastic insulating piece; only for 21841   11427   0.3 (0.14) Molded plastic 1” (25.4 mm) isolating pin. For 40-350A  except for 90A; Two required per location.   11615   0.03 (0.01) Molded plastic, 1” (25.4 mm) isolating pin. For 90A only. Two required per location.   11618   0.03 (0.01) Galvanized Steel Guide Assembly. Provides rigid support at isolation areas.   11127   1.5 (0.68)