2.300M系列鋼廠級鼓式剎車300M Mill Duty Brakes                                          下載down load

     2-3.說明INTRODUCTION
     2-4.訂購資料 ORDERING INFORMATION
     2-5.訂購資料 ORDERING INFORMATION
     2-6.MBE 型直流磁鐵操作剎車
　　    TYPE MBE DC MAGNET OPERATED BRAKES
     2-9.MBT 3相AC油壓致動剎車
          TYPE MBT 3-PHASE AC HY-THRUST OPERATED BRAKES
     2-10.MBT和MBTE 3相AC油壓致動剎車
　       TYPE MBT & MBTE 3-PHASE AC HY-THRUST OPERATED BRAKES
　  2-11.MBT和MBTE尺寸和額定能力 MBT & MBTE DIMENSIONS AND RATING
     2-12.BM型.油壓(踏板式)剎車Type BM HYDRAULIC (PEDAL) OPERATED BRAKES
     2-13.BM型油壓(踏板式)剎車選用和使用 Type BM Selection and Application
     2-14.BEM型DC電磁-油壓鼓式剎車
　         Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES
     2-15.BEM型DC電磁-油壓鼓式剎車
　         Type BEM DC MAGNETIC-HYDRAULIC OPERATED SHOE BRAKES
      2-16.BEM型DC電磁-油壓鼓式剎車尺寸表和額定能力
　          The Dimensions and Rating of Type BEM SHOE BRAKES
      2-17.BTM和BTME油壓-3相AC油壓致動剎車
             MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES
      2-18.BTM和BTME油壓-3相AC油壓致動剎車
             MTM & BTME HYDRAULIC-3PHASE AC HY-THRUST OPERATED BRAKES
      2-19.BTM和BTME油壓致動剎車尺寸表和額定能力
              DIMENSIONS & RATING FOR TYPE MTM & BTME AC HY-THRUST BRAKES
      2-20.手動油壓剎車系統-BM , BEM , BTM,BTME 型
             MANUAL HYDRAULIC BRAKE SYSTEM-TYPE BM , BEM , BTM & MTME BRAKES
      2-21.手動油壓剎車系統 MANUAL HYDRAULIC BRAKE SYSTEM    
      2-22.剎車鼓-ABW型BRAKE WHEELS-TYPE ABW
      2-23.聯軸器BRAKE WHEELS COUPLINGS
      2-24.聯軸器尺寸表, DIMENSIONS Of BRAKE WHEELS COUPLINGS
      2-25.DC電磁剎車整流器和控制器-BE和BEM型
             DC MAGNET BRAKE RECTIFIERS/CONTROLLERS
      2-26.剎車蓋和保護箱BRAKES COVERS/ENCLOSURES

VOLTAGES   電壓

Continuously rated， shunt wound coils are avaìlable for a variety of voltages (Contact Factory for details). The shunt wound brake is designed to release on 80% of voltage. The AISE司NEMA torque ratings are obtained with a continuous duty coil at Intermíttent duty torque ratings. Other shunt cons are available for use wlth AC stalìc rectifier control.

• AC STATIC RECTIFIER OPERATION           AC 靜態登流灣自壘作

00 AC powered equipment where customers prefer a DC brake，an AC/DC controller  can be provided.  This unit includes a transformer，rectifie，r  brake contacto，r protective

fusing and a static brake control timer board.The standard controller is mounted În a NEMA 3R Enclosur。on a panel for mounting Inside customers' equipment. Standard units are

suitable for 230/460/575-3Ph-.60Hz power supplies.For speclal voltages. 什equencies or other applìcations，please contact factory.

• PATENTED SELF-ADJUSTMENT FEATURE    專利自我詢盤特性

You never need to adjust this brake for lining wear! It adjusts itsel，f no troublesome mechanical linkages，s ar wheels or other devices for brake adjustment are requried. The simple，

automat，dependable way In which the adjustment is ac∞mplished is explained in the lIIuslration below.

Each lìme the brake is released， the end stop，attached 10 the brake rod，moves slightly 10 the right Ihrough Ihe pivot

block，adjust

g plates and plale enc/osure. If Ihe brake linings have worn enough so that adjustment is required，the

end slop will move tar enough so that an adjusting ρlate can drop from its upper position to ils lower position around the brake rod.  Since this adjustíng ρlate is now between the end

slop and pivot block， it shortens the e仔ectiveIravel of the

brake rod on the application so that the brake is again in correcladjustment.In Ihís way，

the brakes se!adjust throughout  the 

Ihickness of the linings or untillinlngs are replaced. This feature delivers increased productivity and decreased maíntenance time. It also protects the entire brake assembly from the ímpact loads that can become excessive as the gap between Ihe shoes and the wheel increases.

BRAKE SELECTION AND APPLlCATION

Please reter 10Ihe following page tor technlca，l  dlmensional

Info何natlon on the 300M Series "BEM"- DC Magnetic­

Hydraulic Operated Brakes. If you have an unusual application or require assistance in selecting the approprlale  brake，please conlaclMagnelek's Appllcation Sales Depamenl.