1-6-7.CLUSTER電軌CLUSTER BAR
1.C&W電軌系統(SAF-T-BAR)新目錄
1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load
1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load
1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load
1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load
1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load
1-6.CLUSTER電軌CLUSTER BAR 下載down load
Hanger Clamps
Molded Polycarbonate hangers designed for vertical or horizontal mounting. The hanger clamps “snap on” the conductor for a sliding fit. No field adjustments are required.
|
Anchor Clamps
These are molded plastic pieces that are bolted together and are positioned on each side of the hanger clamp. The anchor clamps hold the conductor firmlyto control thermal expansion and contraction. The kit includes two clamps per conductor.
Part No. Wt lb (kg)
29864 0.10 (0.05)
Multi-Conductor Bracket
Molded bracket with hanger clamps. There is no need for an aluminum mount- ing bracket.
|
Multi-Conductor Bracket
Aluminum mounting channel with hanger clamps, available in various conductor configurations.
|
|
Aluminum channel web bracket with assembled hanger clamps in various conductor configurations.
|
更多商品
1-6-6.CLUSTER電軌CLUSTER BAR
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down loadCrimping Tool Used to join the crimp-style bars together. Part No. Wt lb (kg) 28102 5.0 (2.27) Splice Cover Kit Insulates the bar joint Part No. Wt lbs. 29875 0.2 (.09) Splice Joints Connects two sections or conductors together Bar Type Current Capacity (A) Part No. (Bolted Splice) Part No. (Crimped Splice) Wt lb (kg) Galvanized Steel 40 29632 30211 6.0 (2.72) Rolled Copper 120 29548 30210 7.0 (3.18) Transfer Cap Used to guide the contact shoe through a 1/4” maximum air gap No. Cond Part No. Wt lb (kg) 1 29413 0.10 (0.05) 3 28807 0.30 (0.14) 4 28808 0.40 (0.18) 5 28809 0.50 (0.23) 6 28810 0.60 (0.23) Pick-Up Guides Scoop located at the end of the conductor. Designed to gather the collectors and align them to ride on the conductor bars for discontinuous operation. Consult factory for proper selection. Isolation Kit Provides electrical isolation between conductor bar. Wiring not included Connection Wire Size (AWG) Part No. Wt lb (kg) 10 28126 0.5 (0.23) 8 29869 0.5 (0.23)1-6-5.CLUSTER電軌CLUSTER BAR
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Conductor Bar Continuous roll formed inverted “V” cross section encased by an insulating PVC cover. Splice kit included with the price of conductor. Operating Temperature: -10O F to 160O F. Bars are 15.0 ft (4.57 m) long Bar Type Current Part No. Capacity (A) (w/Bolted Splice) Part No. (w/Crimped Splice) Wt lb (kg) Galvanized Steel 40 28656 28101 2.0 (0.91) Rolled Copper 120 28655 28100 2.0 (0.91) Expansion Section Factory assembled with overlapping design to provide continuous contact with collector shoes to compensate for thermal expansion. Power feeds are flexible jumpers installed to for 40A steel conductor and 96’ for 120A copper conductor. Length: 6 ft. (1.83m)meet electrical and mechanical requirements. Spacing for expansion sections is every 141’ Bar Type Current Part No. Capacity (A) (w/Bolted Splice) Part No. (w/Crimped Splice) Wt lb (kg) Galvanized Steel 40 28658 28104 6.0 (2.72) Rolled Copper 120 28657 28103 7.0 (3.72) Power feed Provides the electrical connection from power source to the conductor bar. It may be located at any point along the conductor, preferably near the systems' center to reduce voltage drop. Connection Wire Size (AWG) Part No. Wt lb (kg) 10 28067 0.4 (0.18) 6 28066 0.4 (0.18) End Power FeedProvides the electrical connection from the power source to the conductor bar. This power feed attaches to the end of the bar. Connection Wire Size Part No. Wt lbs. #8 AWG 29836 0.2 (0.09) #10 AWG 29837 0.2 (0.09) End Cover Two-piece polypropylene boot used to close off the open ends of the conductor bar. Part No. Wt lb (kg) 28105 0.3 (0.14)1-6-4.CLUSTER電軌CLUSTER BAR
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Factor “K” Duty Ta 100% 80% 60% 40% 20% Standard Cover 250 C (770 F) 1.000 1.118 1.291 1.581 2.236 350 C (950 F) 0.905 1.011 1.168 1.430 2.023 450 C (1130 F) 0.798 0.892 1.030 1.261 1.784 550 C (1300 F) 0.674 0.754 0.870 1.066 1.508 The maximum permissible continuous current rating of the conductor bar depends on the duty factor of the cranes and the maximum ambient temperature Ta. It can be established using the following formula: Conductor Ampacity Resistance R (DC)* Reactance 60 HZ 30* Independence z (60 HZ)* Spacing in. (mm) Steel 40A 2382 382 2412 0.75 (19.1) Copper 120A 245 38 248 0.75 (19.1) *Micro-Ohms Per Foot The appropriate conductor bar can be chosen only when all the relevant factors are known. Please refer to the Data Sheet on Pgs. 6-7, and to Appendices I through IV at the back of this catalog. Also, please consult Conductix-Wampfler Sales if you have any questions about the suitability of this product to your application.1-6-3.CLUSTER電軌CLUSTER BAR
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load1-6-2.CLUSTER電軌CLUSTER BAR
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load Conductix-Wampfler Cluster Bar is a safe, economical system engineered to fit in confined areas. On-center bar spacing is only 3/4”. The system features long-wearing copper-graphite shoes and continuously roll-formed 15 ft. sections in either 40A galvanized or 120A copper configurations. Bar covers are PVC to withstand up to 160O F and are rated V-0 (will not support combustion). Cluster Bar can be factory-bent in three orientations to accommodate tight curves. Cluster Bar is Ideal for: Small cranes • Hangar doors Automated Storage and Retrieval Systems • Moving cameras and instruments Conveyors • Other mobile power applications Tightly curved systems Current range: 40A, 120A @ 600 volts maximum Maximum Speed: 600 fpm Features IP2 insulated “finger safe” design Captive “V-contact” design for positive conductivity Can be curved to an 18" radius Backed by the best customer service and engineering services in the industry: Parts in stock for quick delivery Designed and built in the USA under stringent ISO 9001: 2000 standards Engineers are available to help with your unique application Installs Quickly and Easily Minimum number of basic parts Crimped or bolted splices available Easy to maintain Can be mounted vertically or laterally1-6-1.CLUSTER電軌CLUSTER BAR
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load1-5-12.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load M-Head, L-Base Collectors (11961 shown) M-Head, L-Base Collectors, Tandem (11955 shown) M-Head, H-Base Collectors (12304 shown)1-5-11.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR)
1.C&W電軌系統(SAF-T-BAR)新目錄 1-1.SAF-T-BAR C型電軌(C SERIES CONDUCTOR) 下載down load 1-2.SAF-T-BAR H型電軌(H SERIES CONDUCTOR) 下載down load 1-3.SAF-T-BAR T型電軌(T SERIES CONDUCTOR) 下載down load 1-4.INSUL-8 8字型電軌(INSUL-8 CONDUCTOR) 下載down load 1-5.INSUL-8側向8型電軌(INSUL-8 SIDE CONTACT CONDUCTOR BAR) 下載down load 1-6.CLUSTER電軌CLUSTER BAR 下載down load M-Head, L-Base Type, Tandem 160A For systems that require 160A capacity. Operates through curves to minimum radii of 24.0 (610). Has tandem collectors and additional pigtails for the added current capacity. Standard pigtail length: 15" (381 mm) Description Part No. Standard Collector, for continuous systems 11519 Self-centering tandem. For discontinued systems equipped with pickup guide 11292 that require 160A capacity. 15046 M-Head, L-Base Type, Tandem 80A Continuous systems that require 80A capacity. Operates through curves to minimum radii of 24.0 (610). Has tandem collectors.Standard pigtail length: 15" (381 mm) Description Part No. Standard Collector 11955 Self-centering tandem. For discontinued systems equipped with pickup guide 11292 that require 80A capacity. 11954 Side Contact Collector Parts Description Part No. Case only, for M-Head, H-Base Collectors 11307 Case only, for M-Head, L-Base collectors 11300 Contact shoe (copper graphite) for all M-Head collectors 14104 Cast iron shoe 14135 Head assembly for M-Head, H-Base collectors 12296 Head assembly for M-Head, L-Base collectors 11930