- 回首頁 >
- 吊車及捲揚機 >
- S.高架走型龍門(鋁製)吊架及配重行走吊車 >
- 4.S型龍門吊架
4.S型龍門吊架
商品名稱:
4.S型龍門吊架
4.S型龍門吊架
詳細介紹:
更多商品
質量和安全 QUALITY & SAFETY
QUALITY & SAFETY 質量和安全 Quality and Safety Accreditations 質量和安全認證 Quality and safety are key themes throughout this document and the Our Lifting ethos藉由文件和我們吊升精神, 質量和安全是整個關鍵主題 It is with this in mind that we have undertaken external Accreditations to ensure we stay focused on what Is important to our clients and users, and ahead of market trends and developments.Our Lifting Is continuously audited by Lloyds Register Quality Assurance(LRQA)(CE body no. 0088)for approval of Its Integrated Management System combining quality Systems management, environmental issues and the Health and Safety practices within the company 請記住這一點,我們已經進行了外部認證,以確保我們保持專注於我們的客戶和用戶重要的事,並領先於市場趨勢和發展。我們吊升(設備 )需由勞式註冊質量保證(LRQA)(CE機構編號0088)作持續審核批准其綜合管理系統結合了質量體系管理,環境問題和公司內部的健康和安全實踐 Furthermore our products are subject to type examinations by witnessed testing and review of Technical files which are carried out by SGS UK (CE body no.0120) 此外,我們的產品通過目擊測試和技術文件審查進行型式檢查 由SGS UK執行 (CE)-Conformite Europeenne (CE) 符合歐洲標準 Our Lifting’s products have been designed, tested And approved(as appropriate) to CE requirements This certifies that Our Lifting’s products meet the Demands of the European Directives regarding health And safety requirements 我們的吊升產品已經過設計,測試和批准(根據需要)符合CE要求 這證明了我們的的產品滿足歐盟關於健康和安全要求的規則 The Queen’s Award for Enterprise Innovation:企業創新女王獎: Our Lifting has been awarded this prestigious Award for innovative Design and development of lightweight, protable and Safe lifting solutions In both 2006 and 2013 我們的吊升的(產品) 在2006年和2013年獲得了創新設計和重量輕開發的著名獎項,可保護和安全的起重解決方案 THE QUEEN’S AWARDS FOR ENTERPRISE: INNOVATION 2006企業的女王獎:創新2006年 THE QUEEN’S AWARDS FOR ENTERPRISE INNOVATION 2013企業的女王獎:創新2013年 Testing測試 Testing and Technical File review are integral parts of our design and manufacturing process. External Verification of products is undertaken where appropriate Using government approved Notified Bodies. 測試和技術文件審查是我們設計和製造過程的部分。 外面產品驗證由使用政府批准的認證機構進行。 All products have been thoroughly type tested at UKAS accredited laboratories. Each system is supplied With a certificate of conformance and individual record of thorough examination or test. 所有產品已在UKAS認可的實驗室進行了徹底的型式試驗。 提供每個系統 具有合格證書和徹底檢查或測試的各別記錄。 Full product design & development Technical Files Are available for inspection 完整的產品設計和開發技術文件可供檢查 Our Lifting holds the following certifications我們的吊升的(產品)擁有以下認證 ISO 9001:2008 – Specifies requirements for a Quality management system for any organization that needs to demonstrate its ability to consistently Provide products that meets customer and applicable Regulatory requirements and aims to enhance Customer satisfaction. ISO 9001:2008 -對任何需要證明其能力的組織的質量管理體系的特定要求, 一致地提供滿足客戶和適用法規的產品,並旨在提高客戶滿意度。 ARTICLE 11B – Specifies a quality system to comply With the strict requirements of producing a product To the PPE Directive 89/686/EEC 第11B條 - 指定一個符合嚴格生產產品要求的質量體系根據PPE 89/686 / EEC管理 ISO 14001:2004 – Specifies the requirements for Implementing environmental management systems Throughout all areas of the company ISO 14001:2004 - 指定實施環境管理系統在公司的所有領域的要求 OHSAS 18001:2007 – Occupational health and safety Managements systems OHSAS 18001:2007 - 職業健康和安全管理人員系統 LEEA Membership – Our Lifting is a full member of The Lifting Equipment Engineers Association(LEEA Membership 000897). Our Lifting conforms to the main Aims of the association which is to achieve the highest Standards of quality and integrity in the operations of Members. LEEA會員 - 我們的吊升產品是起重設備工程師協會(LEEA會員000897)的正式成員。 我們的吊升產品符合協會的主要目標,即在成員的操作中實現最高質量和誠信標準。 Entry qualifications are demanding and strictly enforced through technical audits based on the Technical Requirements for Members. 入會資格需求並嚴格地强制通過基於會員技術要求的技術審核。專業服務 SPECIALIST SERVICES
SPECIALIST SERVICES 專業服務 Customisation 客製化 More than an” off the shelf’ manufacturer, Our Lifting’s Commitment to creating innovative, efficient and safe Lifting system extends to us welcoming enquiries for Our flexible and effective designs enable customized Manufacturing to meet a wide range of requirements. 很多現有的製造商,我們的起重承諾來產生創新,高效率和安全的起重系統使我們擴展 ,歡迎的詢問我們的靈活和有效的設計,使客製化製造以滿足廣泛的要求。 In addition to this customization service, we are Pleased to work with clients to develop totally bespoke Solutions for lifting challenges; jointly develop products For niche applications; develop solution accessories to Improve effectiveness or user safety and to work with Organizations to ‘design in’ our products into larger Scale projects from an early stage. 除了這種客製化服務,我們很高興與客戶合作開發完全訂製的解決方案來應付挑戰; 共同開發產品適合少數的應用; 開發解決方案配件提高效率或用戶安全,並與組織合作,從早期階段就將我們的產品設計為大規模的項目。 Safe assembly, handling & Maintenance training 安全裝配,操作和維護培訓 Our Lifting provides safe assembly, operation and Maintenance manuals and offers hands on training for All systems, either at our facility or at the premises. This training is designed to ensure That the client can effectively and safely assemble and Operate the equipment in the relevant configuration 我們起重提供安全的裝配,操作和維護手冊,並在我們的工廠或辦公室提供所有系統的培訓。 本培訓旨在確保客戶能夠有效和安全地組裝和操作相關配置中的設備 Consultancy services 諮詢服務 Our Lifting will be pleased to provide consultancy Support for the development of: 我們的吊升將很樂意提供諮詢支持開發: .Customised product developments 客製化產品開發 .Full ‘design in’ applications 全'設計在內'應用 .Bespoke solution development 訂製解決方案開發 .Joint product development 聯合產品開發 Further information and support 更多信息和支持 Further information and support can be found on our Website 更多信息和支持可以在我們的網站上找到 Or simply request: 或者簡單需求: .A presentation or demonstration 簡報或展示 .Sales support visit 銷售支持拜訪 .Brochures 目錄 .Product data sheets 產品數據表 .Joint marketing campaign development-mailers, Adverts, exhibition attendance, etc 聯合營銷活動開發郵件,廣告,展覽會等 .Consultancy discussions 諮詢討論 .Lunch and learn events 午餐和學習活動AL底座 AL-BASE
AL-BASEAL底座 Versatile, portable socket base for AL-DAVIT 500 systems 多功能,便攜式套筒底座,適用於鋁製吊桿500系統 500kg WLL工作荷重限制 1people 1人 Various configurations & bagged 各種配置和袋裝 EN795安全標準 A truly innovative extension to the Our socket family to Further support the flexible use of the AL-DAVIT 500 Range. The most convenient socket without any need for a Fixed socket installation. 對我們套筒系列的真正創新擴展,進一步支持鋁製吊桿500系列範圍的靈活使用。最方便的套筒無需任何固定套筒安裝 AL-BASE Information AL底座資料: .GOODS WLL Up to 500kg at a max. 1,000mm radius貨品安全荷重可達500公斤在最大1,000mm半徑 .PERSONNEL WLL Up to 120kg 人員安全荷重可達120公斤 .PORTABLE Packed in heavy duty protective bags for Easy transportation and storage 便攜包裝在重型保護袋,便於運輸和存儲 .SPECIFICATIONS規格 -Adjustable feet for uneven surfaces with spirit level Fitted to each leg 用於不平坦表面可調節腳,每條腿附有水平氣泡儀 -For use with 65mm socket diameter 適用於65mm套筒直徑 -Suitable for clean environments適用於清潔環境 Available as a 90°,180°,360°, as well as the 270°Counterbalanced version with up to 1,000mm radius 可提供如90°,180°,360°,以及270°平衡版則最大可達1000mm半徑 AL-BASE is not suitable for use with socket extensions, AL-DAVIT QUANTUMs or T-DAVITS. 鋁製吊桿不適用於套筒延長,鋁製吊桿 量子或T-吊桿。 Notified Body Approval Lloyd’s Register(0038) 認證機構勞氏船級社批准(0038) AL-QUAD AL四方脚 Ultra lightweight and stable lifting structure perfectly超輕和穩定的完美地吊升結構 Designed for lifting heavy submersible pumps設計為吊舉重型潛水泵 The strong, yet extremely lightweight, mobile AL-QUAD, is available in WLL 500kg and 1,000kg models. They are easily carried, assembled and Can be used by just 1 person, saving time, manpower and related expense. 強力,但極其輕便,移動四方脚,提供安全荷重 500kg和1,000kg的型號。 它們易於攜帶,組裝,只需1人即可使用,節省時間,人力和相關費用。 500KG 1000KG WLL工作荷重限制 1people 1人 bagged 28KG bagged 36KG袋裝 28公斤, 38公斤 AL -QUAD Information:AL四方脚資料 .GOODS WLL Up to 500kg or 1,000kg (depending on model) 貨品安全荷重可達500公斤或1,000公斤(取決於型號) .LIGHTWEIGHT & PORTABLE 重量輕和可攜帶的 -Rapid on site assembly within manual handling guidelines依手册處理指南快速現場裝配 -2 heavy duty carry bags(maximum bag weight 18kg) 2個重型手提袋(最大袋裝重18kg) .CORROSION RESISTANT Clean anodized finish to Increase wear resistance 耐蝕 ,清潔,陽極化處理以增加耐磨性 .SPECIFICATIONS規格 -360°swivel locking castors for easy manoeuvring 360°旋轉鎖住腳輪,方便操作 -Levelling feet option for easy use on most terrains平衡腳選項容易用在大部份地形 -Highly stable structure vs Tripod 對三腳架來講具高度穩定的結構 -Can be supplied with directional lock or leveling feet可以提供方向鎖住或水平腳 Height to lifting Eye ( mm ) , 到吊眼高度( mm ) Weight Assembly ( Kg ) 组合重量 ( Kg )套筒和延長 SOCKETS & EXTENSIONS
SOCKETS & EXTENSIONS 套筒和延長 SOCKETS套筒 Our Lifting manufactures a range of 65mm and 95mm standard sockets to suit the needs of clients’ Davit mounting foundations, designed and tested For AL-DAVIT and T-DAVIT product families with CE requirements for Declaration of Conformity& Incorporation . Customised sockets can be developed for specialist requirements 我們的吊升生產範圍為65mm和95mm標準套筒,以適應客戶的需求 吊桿的安裝基礎,設計和測試適合鋁製-吊桿和T型吊桿產品系列並合格公司聲明的CE需求。訂制套筒可製作專門的要求 .Flush Mount: 嵌入式安裝: -Complete with cover and re-bars, for casting Into concrete, and protective cover 完成含蓋和竹節鋼棒,適合鑄造成混泥土和防護蓋 -Complete with cover for resin bonding into existing concrete完成含蓋適合樹脂結合到現有的混凝土 .Top Mount:Suitable for bolting into existing Concrete or steel structures-for simplicity or to Provide additional davit height and reach 頂部安裝:適用於螺栓連接到現有的混凝土或鋼結構,為簡單化或提供額外的吊桿高度和範圍 .Side Mount:Suitable for mounting on the side of Concrete or steel structures. A brace plate can be Supplied for thin-walled concrete 側面安裝:適合安裝在混凝土或鋼結構的側面。可提供支撑板適用於薄壁混凝土 .Bridge Mount:Suitable for bolting into steel Structures. Designed to fit open mesh grating or Flush with structural steel work 橋式安裝:適用於螺栓連接到鋼結構。設計適合開放式網格柵或嵌入結構鋼工作 .Customised:Bespoke versions can be developed For non-typical installations. 訂製的:訂製的版本可開發非典型安裝。 All sockets are available in galvanized mild steel, passivated 316L stainless steel and yellow painted Finish, with customization available for specialized requirements 所有套筒均採用熱浸鍍鋅低碳鋼 , 鈍化316L不銹鋼,鍍黃色面漆,可依專門要求訂製。 SOCKET EXTENSIONS套筒延長 Socket extensions are designed to provide additional Height of lift, or to reach over obstacles, protective rails or walls for 65mm socket/kingpin products 套筒延長件設計用來提供增加的揚度或通過障礙物,用於65mm套筒/主柱產品的保護軌或牆 Made with lightweight aluminum alloy with handles for Lifting and carrying, Our Lifting socket extensions are Very easy to use. They simply insert into the existing Socket and the standard T-DAVIT or AL-DAVIT is assembled as normal using the extension as its socket 由重量輕,鋁合金製成附把手適合吊升和攜帶,我們吊升套筒延長件非常易於使用。 它們只需插入現有的套筒,並且標準T型吊桿或鋁製吊桿組合如正常使用延長件作為套筒 Socket extension options 套筒延長選項 Socket extensions are available in three standard sizes套筒延長件有三種標準尺寸 And can be customized to requirements: 並且可根據客戶要求訂製: .500mm .800mm .1,100mm .Customised 訂製 Socket Extension lnformation:套筒延長件資料 .Can be used with 65mm davits combined With 65mm fixed sockets 可與65mm 吊桿結合使用,結合65mm固定套筒 .Increases the height to the lifting eye by 500mm, 800mm or 1100mm as standard 增加到吊眼的高度 ,以500mm , 800mm或1100mm為標準, .Portable and lightweight with carrying/lifting Handles便攜式和重量輕含攜帶/吊升把手 .Safe use features安全使用功能 .Maintenance free 免維護 .Manual handling compliant 適合 手動處理 DISCLAIMER:All Our sockets& extensions have been designed, developed and tested for safe use with R’s equipment and form a Key part of the integrity of the total system. Should non-standard third party sockets be used, R Lifting’s Declaration of Conformity & Incorporation on the products is negated. i.e. The system becomes the responsibility of the client. 免責聲明:所有我們套筒和延長 都經過設計,開發和測試,可與R公司設備安全使用,並構成整個系統完整性的關鍵零件。 如果使用非標準的第三方套筒,R公司吊升的產品符合性和公司聲明被否定。 即這個系統成為客戶端的責任。 Flush Mount 嵌入式安裝 Top Mount 頂部安裝 Side Mount 側面安裝 Bridge Mount 橋式安裝 Bespoke 訂製 Socket Extensions套筒延長替代的變更 Alternative Variations
Alternative Variations 替代的變更 TYPE VS VS型 Sliding beam T-DAVIT with Variable Radius Shackles 滑動樑T型吊桿含變化半徑卸克 TYPE WW VW型 Variable Winched sliding beam T-DAVIT with shackles & ergonomically positioned Winch(upper or lower) 可變化絞盤滑動樑T型吊桿含有卸克與人體工程學定位的絞盤(上或下) TYPE T T型 Geared Trolley T-DAVIT 齒輪小車T型吊桿 Type W Dimensions W型尺寸 Beam option 吊樑選用 Position位置 B Position位置 A, Radius 半徑, Load rating 1額定荷重1 Column option 主柱選用Height of Lift 吊高HOL A HOL B Winch position絞盤位置 P2 P1 W5 W4 W3 W2 W1 If you need dimensions for a Type S (Shackle only) T-DAVIT, please contact a R Lifting representative 如果你需要S型尺寸(只有卸克)T型吊桿,請聯繫 R公司起重代表T型吊桿 W & S型 T-DAVIT TYPE W & S
T-DAVIT TYPE W & S T型吊桿 W & S型 The bespoke T-DAVIT is lightweight, portable and manufactured with specific needs in mind 定制的T型吊桿輕巧可攜帶, 並在考慮到具體的需求下生產 500kg WLL工作荷重限制 1 person 單人 Customised & bagged 訂制和袋裝 EN795安全標準 An extensive range of davits offering up to WLL 500kg with 360°rotation under finger tip control for those difficult locations ,giving a wide range of standard height and radius options and available customization 吊桿提供一個廣泛的範圍,工作荷重限制可達500公斤, 含有困難位置的指尖控制可作360°旋轉,給了廣泛的標準高度和半徑選項和可執行客制化 Particularly suited to situations with environment constraints (headroom, handrails etc.) with a wide range of configurations available Designed to comply with manual handling regulations and to avoid Assembling the davit at height. 特別適合於環境限制(頂部空間,扶手等)的情況下具有廣泛的配置,提供設計符合人工搬運的規定, 並避免在高處組裝吊桿 N.B: TYPE W provides Winch & Shackle lifting points. 註:W型提供絞盤及卸克吊點。 TYPE S provides Shackle lifting only S型只提供卸克吊裝 T-DAVIT Information: T型吊桿資料: .COODS WLL Up to 500kg(see table on next page) 貨品安全荷重可達500公斤(見下頁表格) .PERSONNEL WLL Configurations available up to 150kg人員安全荷重配置可達150公斤 .1 PERSON FALL ARREST EN795:2012 certified單人防墜落EN795:2012認證 -as part of an EN363 compliant system 作為EN363標準的系統的一部分 .ATEX Suitable for use in ATEX Zone 2 explosive Atmospheres ATEX適合用於ATEX 2區爆炸環境使用 .LIGHTWEIGHT & PORTABLE 重量輕,可攜帶的 -Manual handling compliant 人工搬運標準 -Reduced maintenance costs降低維護成本 -Bagged for easy transportation and storage 袋裝便於運輸和儲存 .RAPID ASSEMBLY Assembly & operation by 1 Person, no tools required-just 2 main components 快速組裝 由1個人裝配及操作,勿需工具,只是2主要零部件 .RADIUS ADJUSTMENT Operational radius up to 3,000mm - subject to WLL reduction (1,900mm maximum for EN795) 半徑調整 ,操作半徑可達3,000mm -工作荷重會減少(1900mm最大荷重適合EN795標準) .EASE OF ROTATION 360°rotation under full load With fingertip control 旋轉容易360°全負荷下旋轉只有指尖控制 .CORROSION RESISTANT Clean anodized finish to Increase wear resistance 耐蝕 ,清潔,陽極化處理以增加耐磨性 .UNIVERSAL KINGPIN Mates with all 65mm R sockets (or sleeves for existing sockets) Also suitable for use with socket extensions 萬用主柱和R公司 65mm套筒配合(或袖套適合現有套筒) 而且可適合使用套筒的延伸 .SPECIFICATIONS 規格 -2 lifting positions as standard (A & B) 2吊升位置為標準(A&B) -Twin shackles for index lifting and/or attachments for winching雙卸克作為指數吊升和/或適合絞盤配 Patent pending 專利申請中 Options & Upgrades: 選項和升級: .Integrated wheel carrier for reduced manual handling 含車輪携帶器可降低人工處理 .Beam radius adjustment 吊樑半徑可調節的 .Fall arrest(EN795:2012)and Personnel winching 防墜落(EN795:2012)和人員絞盤鋁製吊桿-量子資枓 AL-DAVIT QUANTUM Information
PORTA-DAVIT QUANTUM Information: 鋁製吊桿-量子資枓: .GOODS WLL 貨品安全荷重 -AL-DAVIT QUANTUM 1-up to 600kg at 1,200mm radius 鋁製吊桿-量子1在1200mm半徑可達到600公斤 -PORTA-DAVIT QUANTUM2-up to 500kg at 1,500mm radius 鋁製吊桿-量子2在1500mm半徑可達到500公斤 .PERSONNEL WLL Up to 150kg at all configurations 人員安全荷重在所有配置中可達150公斤 .1 PERSON FALL ARREST EN795:2012 certified as part of an EN363 compliant system 1人防墜落EN795:2012認證, 符合EN363系統的一部分 .ATEX Suitable for use in ATEX Zone 2 explosive atmospheres ATEX適合用於ATEX2區爆炸環境環境 .LIGHTWEIGHT & PORTABLE Manual handling 重量輕,可攜帶的手動操作 Compliant-fully assembled weight from just 18.5kg 完全組裝應允重量只從18.5kg -Integrated carry handle 含有搬運把手 -Bagged for easy transportation and storage 袋裝便於運輸和儲存 .RAPID ASSEMBLY No tools needed, assembles on just 1 pin(2 for winched) 快速組裝 ,無需工具 組合只有1支插梢(絞車2支) .RADIUS ADJUSTMENT 900mm-1,200mm or 1,200mm-1,500mm as standard 半徑調整900mm-1200mm或1200mm-1500mm是標準的 .EASE OF ROTATION 360°rotation under full load with fingertip control 旋轉容易360°全負荷下旋轉 只有指尖控制 .CORROSION RESISTANT Clean anodized finish to Increase wear resistance 耐蝕 ,清潔,陽極化處理以增加耐磨性 .UNIVERSAL KINGPIN Mates with all 65mm R sockets (or sleeves for existing sockets) Also suitable for use with socket extensions 萬用主柱和R公司 65mm套筒配合(或袖套適合現有套筒) 而且可適合使用套筒的延伸 Type S(Strop) S型(滑索) Type W(winched) W型 ( 捲揚機) Folded Dimensions 折疊後尺寸 Radius Adjustment Points半徑調節點鋁製吊桿-量子 AL -DAVIT QUANTUM
AL -DAVIT QUANTUM鋁製吊桿-量子 Strong yet ultra-light system with integrated Carry handle, capable of lifting up to 600kg 強而且超輕系統,附有攜帶手把,吊升能力可達600KG 600KG WLL工作荷重限制 1people 1人 From 18.5KG從18,5 Kg EN795安全標準 This unique, ultra-light and rapidly deployable system is the latest Innovation to come from REID Lifting. 獨特, 超輕型和快速的可展開的系統來自R吊舉是最近的創新 With a WLL 600kg and weighing From just 18.5kg with an integrated carry-handle, the AL-DAVIT QUANTUM is easily transported, and suitable for a range of applications 工作荷重限制600公斤,重從只有18.5公斤具有手提把柄,鋁製吊桿-量子, 是便於運輸,而且適用於多種應用 NEW HEAD DESIGN 新頭部設計 Innovative head design with three Sheaves& dual winch position 創新的頭部設計有三個滑輪和雙絞盤位置 IMPROVED SAFETY 提高了安全性 Shock absorbent strop for enhanced personnel protection緩衝吸震滑索,增強個人保護 ( C)ULTAR-LIGHTWEIGH 超輕重量 Integrated carry handle. Unit weighs from just18.5-23.5kg 附有手提把柄。單位重量僅僅從18.5-23.5kg (D)QUICK & EASY ASSEMBLY 快速和易於組裝 Telescopic jib with Integral overload indicator伸縮臂附帶有超負荷指示器 (E)RAPID ATTACHMENTS快速配件 Column fins allowing simple Winch attachment and 2 Radius ranges ( 900-1200mm or 1200-1500mm) 主柱鰭片允許簡單絞車配件和2半徑範圍 ( 900-120mm或1200mm-1500mm ) (F)EASE OF ROTATION 容易旋轉 Innovative bearing design for ease of rotation under load 創新軸承設計荷載作用下易於轉動 TYPE S S型 (STROP) (滑索) TYPE W W型 (WINCHED)( 捲揚機)