2-15.CM 舞台吊車最近資枓 Theatrical Hoist Update 點擊圖片放大
商品名稱:

2-15.CM 舞台吊車最近資枓 Theatrical Hoist Update

詳細介紹:
2. CM 舞台吊車最近資枓 Theatrical Hoist  Update                                                下載down loadCM 舞台吊車最近資枓 Theatrical Hoist Update


THE CM SPECIAL THEATRICAL

ALLOY CHAIN (STAC)

For theatrical rigging applications where bridle adjustability is required.

 

SUPER STRENGTH

With working limits of 6 tons

1/2˝ diameter grade 80 alloy material.

HEAT TREATED

Alloy steel provides long life.

FIRE & ABRASION RESISTANT

4:1 DESIGN FACTOR

Meets or exceeds worldwide standards.

PROOF TESTED

Each link proof tested to assure weld and material integrity.

POSITIVE AND EASY ID Chain embossed with STAC and CM for easy identification

as CM alloy. Also tagged with size, grade, reach and working load limit.

VERSATILITY

Link accepts up to 3/4" shackle for adjustability.

WIRE ROPE CLIPS

Wire rope clips are used to secure the end of wire rope when forming a loop, i.e, for wire rope turn back. Available in mid-grip (double saddle) and single saddle.

Mid-grip clips are available

in a drop forged carbon steel material and single saddle clips are available in malleable iron

or drop forged carbon steel. Available in sizes up to 1 1/2".

LAP LINKS

A quick permanent way to repair general purpose chains. Chain link and attachments are threaded onto the lap link and the link flattened. Available in a variety of sizes with stock diameters from 1/8" thru 5/8" chain. Not to be used for overhead lifting

and prohibited for all load securement applications by CVSA.

 

 

QUICK LINKS

Afford quick and easy chain repair and/or attachment of fittings. Easy closing by threading nut onto threaded end. Reusable. Available in stock diameters ranging from

1/8" to 1/2". Not to be used for overhead lifting, and prohibited for all load secure- ment applications by CVSA.

 

 

SHOULDER EYE BOLTS

  • Forged steel / quenched and tempered.
  • Metric sizes available.
  • Recommended for straight line pull.

 

 

GRADE 100  CHAIN

  • Working load limit up to 17 tons.
  • Diameter sizes available from (7/32" to 3/4").
  • Meets or exceeds many National and International standards.
  • 25% higher working load limit when compared to Grade 80.
  • Available self-colored, or grey thermal dip.
  • Certification included with every drum.
  • 100% proof tested.

S.T.A.C.

GRADE SPECIAL ALLOY SIZE 12.7

COLUMBUS  McKINNON

 

 

REACH..................FT. LEGS       1

WLL 6000 Kg

AT 900   TO HORIZONTAL

THIMBLES-WIRE ROPE

Made specifically for wire rope turn back forming a cable loop. Used in conjunction with wire rope clips. Manufactured of hot rolled steel in accordance with FED. SPEC. FF-T-276. Available in sizes to fit a maximum of 1 1/2" diameter wire rope.

WIRE ROPE CLIPS

Wire rope clips are used to secure the end of wire rope when forming a loop, i.e, for wire rope turn back. Available in mid-grip (double saddle) and single saddle.

Mid-grip clips are available

in a drop forged carbon steel material and single saddle clips are available in malleable iron

or drop forged carbon steel. Available in sizes up to 1 1/2".

TURNBUCKLES

Turnbuckles find many uses to apply tension to wire rope or cable. They are composed

of a forged body and two end fittings. End fittings can be eyes, jaws, or hooks. They must, however, be applied only up to loads within their working load limit

as specified for the particular end fitting being applied.

 

EYE SWIVELS

  • Hot dip galvanized.
  • Ultimate load is 5 times working load limit.
  • Meets the performance requirements of RR-C-271D, Type VII, Class 2.
  • Made in USA
  • Regular forged eye and eye swivels.

 

GRADE 30 CHAIN

An economical utility chain for apps which

do not require a high strength to weight ratio.

  • Typically used as trim chain or studio chain.
  • Low carbon steel.
  • Diameter sizes available from 3/16" to 1"

  • Available as self colored, zinc plated, or hot galvanized.
  • Also available in Grades 43, 70, 80 and 100